shaft bushing for sale, brand-new and used.

Martin 5016 Roller Chain Coupling, Sintered Steel, Inch, 16 Teeth, 1 1/4" Bore, 3 25/32" OD, 1 7/16" Length, 4000 rpm Max Rotational Speed, 1/4" x 1/8" Keyway This Martin hub is one of two simplex sprockets used in a roller chain coupler for joining and transmitting power to two perpendicular shafts. It is made of sintered steel for strength and hardness and has hardened teeth for resistance to wear and fatigue.

HONEYWELL / CLAROSTAT POTENTIOMETER P/N RV4NAYFD102C 2 WATT Description: Potentiometer, Mil Style, 3/8" Dia. Locking Bushing, 2 Watt, Conductive Plastic, 1K Ohm, Log Taper, 1/4" Dia. Shaft with Flat C11C

NEW CHEMGLASS CG-2077-G-21 Stirrer Bearing, 24/40 Joint 30 DAY SELLER WARRANTY! STIRRER BEARINGS, CHEM-VAC, PTFE NEW Chem-Vac PTFE stirrer bearing provides a VACUUM TIGHT FLAKE-FREE SEAL. Two versions of the bearing are available, the standard series for 2L and smaller vessel capacities and the stabilizer series that incorporates a PEEK/PTFE stabilizing bushing that is molded to the lower portion of the inner joint.

NIB TRANTORQUE GT 6202380 KEYLESS BUSHING 1-7/16'' SHAFT SIZE UNUSED SURPLUS BUSHING IN OPEN FACTORY BOX________________________________________________________________#2 SHELF A3 (4)

U.S. Blind Stitch Model 1118-K, Blindstitch, Cylinder Bed, Chainstitch, Heavy Duty, Industrial Sewing Machine, Complete unit with Table and Motor 220V 3-Phase. Delivered anywhere within the continental USA.

Martin 4016 Roller Chain Coupling, Sintered Steel, Inch, 16 Teeth, 1" Bore, 3 1/32" OD, 1 1/8" Length, 5000 rpm Max Rotational Speed, 1/4" x 1/8" Keyway

5 X Alps Rotary Encoder with Momentary Switch - 30 Detents - 360 Degree Movement - PC Board Mount Brand new rotary encoder with built-in momentary push switch You will receive 5 encoders Manufacturer: Alps 360 degree shaft movement (endless rotation) 30 detent points Base dimensions: 12 mm x 12 mm x 4 mm 7 mm diameter, 10 mm long bushing

StrongArm 6333 Toyota Camry 2007 Hood Lift Support, Pack of 1

Belt Drive Motor, Split-Phase, Cradle Base HP, Nameplate RPM 1725, Voltage 115, 1 Phase, Frame 56Z, Open Dripproof, Full Load Amps 6.8, 60 Hz, Cradle Base Motor Mounting Type, Thermal Protection Auto, Insulation Class B, Service Factor 1.0, Ball Bearings, Max. Ambient Temp. 40 Degrees C, Motor Shaft Rotation CW/CCW, Overall Length 11-1/8 In., Shaft Dia.

Planetary Shaft & Bushing For Hobart D300 Mixer Part # 71187 Planetary Shaft & Bushing For Hobart D300 Mixer Replaces Hobart Part # 71187 OEM part numbers are used for references only California buyers pay sales tax. Outside of California buyers are tax exempt.

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (ONE) PRECISION POTENTIOMETER AS FOLLOWS: VALUE: 1K (1,000) OHM 10-TURNS TOL: +/- 5% LIN: +/- 0.25% RATED: 1 WATT WIRE WOUND MADE BY: BOURNS MODEL: 83A1AB28J10 PANEL MOUNT - 3/8" bushing

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (ONE) PRECISION POTENTIOMETER AS FOLLOWS: VALUE: 100K (100,000) OHM 10-TURNS TOL: +/- 5% LIN: +/- 0.25% RATED: 1 WATT WIRE WOUND MADE BY: BOURNS MODEL: 83C1DE24J10 PANEL MOUNT - 1/4" bushing

N O S 3" BLACK STEEL TAPERED BUSHING / LOCK ? FACE IS 4-3/4" TAPER IS 1-1/2" LONG could be some type of 3" shaft lock do not know bin 7

Feeding Concepts, Inc.-

New Hub City Tapered Bushing Kit for Shaft Mount Gear Reducer Part # 0279-00092 3 7/16" Shaft for size 7 Reducers PT315 30 day guarantee to be in good working condition and as stated. For more information email or call 479-651-1352.

THIS ITEM IS FOR ONE: BOURNS 10-TURN PRECISION WW POTENTIOMETER MODEL 3400-1-503 RESISTANCE: 50K (50,000) OHM TOL.: +/- 3% LIN.: 0.15% RATED: 5 WATTS OPER. TEMP: -1 DEG. C to 125 DEG.

This 8” x 1” x 1" wheel that looks unused but does have a ring on label. so check pictures.. It is 60 grit and comes with the 5/8 grinder shaft bushing.