shaft bushing for sale, brand-new and used.

This is a very potent little motor. CW rotation only. Running no load, at max voltage, this thing spins well over 10,000 RPM - (probably over 20K).

Canadian Ground Shipments by Purolator

purchase for a project and never used it... Series: Trantorque Mini Torque Transmission: 764 in lb

> These are new motors that were removed from a fan assembly.  The motors were coupled to the fan via rubber bushing that was cemented to the shaft, that is what the residue on the shaft is from.  It can be easily removed with a scotch brite pad and a little elbow grease.  The fan assemblies were never used so there is no run time on these motors.  The motors have bearings, not bushings and are of good quality and run for many years trouble free.

Belt Drive Motor, Split-Phase, 1/3, 1/11 HP, Nameplate RPM 1725/1140, Voltage 115, 1 Phase, Frame 48, Open Dripproof, Full Load Amps 6.6/2.4, 60 Hz, Cradle Mounting, Thermal Protection Auto, Insulation Class B, Service Factor 1.0, Ball Bearings, Max. Ambient Temp. 40 Degrees C, Rotation CW/CCW, Overall Length 10-1/4 In., Shaft Dia.

NEW 3" I.D. Linear Bushing Bearing Rexroth R0750 248 15 Star Barden

A.O. SMITH Draft Inducer Motor with Switch # 571 Draft Inducer Motor Fan & Blower Duty Shaded Pole 1/20 HP 3000 RPM 1 SPEED 115/230 VOLTS 1.8/.92 AMPS 1/4" X 2 1/2" Shaft Diameter and Length 3 3/8 Motor Diameter CWSE/CWLE Rotation 6 "A" diameter

#header, #subheader, #leftpane, #rightpane, #showcase ul, #seo, ul.tablinks, #largeimage, #design, #customhtml, #descriptiontitle, #ImageID { display: none; } #showcase a { visibility: hidden; } #background { text-align: center; } #container { border: 1px solid #999; text-align: center; width: 770px; margin: 0px auto; } * html #container { width: 772

used 1P3T Rotary Switch, 3 position, 1/4 inch shaft, 3/8" mount bushing Solder terminals. Wafer material: ceramic. As presently configured, the outer wafer serves only as a terminal block for two 20K 2 watt resistors and one 610 ohm 1/2 watt resistor.

used 3P3T Rotary Switch, 3 position, 1/4 inch shaft, 3/8" mount bushing Solder terminals. Manufacturer unknown. Mounting hole: 3/8 inch diameter.

111SD, used 4P3T (or 4P5T) Rotary Switch, 3 or 5 position, 1/8" shaft, 1/4" mount bushing There are two rotation stop tabs. As presently configured, the 3 position stop tab is in place (and the 5 position stop tab is bent out of the way). To reconfigure for 5 positions: bend the 3 position tab out of the way, and bend the 5 position tab down (toward the wafters).

PA300, used 5P3T Rotary Switch, 3 position, 1/4 inch shaft, 3/8" mount bushing Solder terminals. Wafer material: ceramic. Manufacturer unknown.

PA1007, used 3P3T Rotary Switch, 3 position, 1/4 inch shaft, 3/8" mount bushing Solder terminals Manufacturer unknown. Mounting hole: 3/8 inch diameter. Threaded bushing is 3/8 inch long.

Pulley / Sheave Reducer Sleeve to reduce a 5/8" Bore Pulley sprocket wheel to fit a Motor with a 9/16" Shaft with a 3/16"

ELECTROSWITCH CORPORATION ROTARY 3 DECK SWITCH &n

If your pads are loose and ready to fall on the next job, replacing is cheep and easy. Start with WD40 from the auto parts store. Let it soak for an hour and wa-la it will come off.

42 Series Top Notch Quality Adjustable Rotary Selector Switch Military Spec., Rugged Construction Single Pole, 2-10 Adjustable Position Rotary Selector Switch (Has removable pins to set number of positions) Heavy Duty, Long Life