shaft fan for sale, brand-new and used.

New Broan/Nutone fan. Model 5KSM84DFK132P. Thermal overload protection.

This listing is for 4M073A fan and blower motor 1/70hp 3000rpm 115v 3/16 dia. x 1" shaft The item is new in the box

PROTECH Condenser Motor - 1/5 hp 208-230/1/60 (1075 rpm/1 speed) 51-23055-11 Technical Data: HP: 1/5 No. of Speeds: 1 High Speed (RPM): 1075 Input Voltage (V): 208 Input Voltage (V): 230 No. of Phases: 1 Frequency (Hz): 60 Rotation Direction (OSE): Reversible Run Capacitor (uF/V): 3/370 (230V), 5/370 (208V) FLA at 230V (A): 1.30 Shaft Diameter (in.): 1/2 Motor Body Diameter (in.): 5-5/8 Keyed/Fla

Condenser Fan Motor Item #: 1859 1/6HP Totally Enclosed Condenser Fan Motor 5.6" Diameter, Totally Enclosed Air Over (TEAO) 140°F (60°C) Ambient Design Sleeve Bearings have All Angle Thrust System Class B Insulation Extended Studs 30" Leads Hubless Lead End Drain Holes Both Ends Automatic Reset Thermal Overload Protector Continuous Duty HP: 1/6 No. of Speeds: 1 High Speed (RPM): 1075 Input Voltage (V): 208 Input Voltage (V): 230 No.

This fan motor has never been used. I installed it into my Carrier Condenser unit and then decided to replace the whole Heat Pump system. I cut the shaft to 5" to fit in my unit.

AVAILABLE FOR SALE MOTOR , HERE ARE THE SPECS : Motor Application HVAC/R Motor Sub Application Direct Dr Fan/Blower Motor Type PSC Enclosure Open Air-Over HP 1/2 to 1/6 Nameplate RPM 1075 Voltage 208-230 Full Load Amp 3.6 Hz 60

UP FOR SALE CONDENSER FAN MOTOR , HERE ARE THE SPECS : Motor Type PSC

Product type: AC, single phase, condenser fan heavy duty. Description: 1/6 horsepower, continuous duty, 1.0 service, ball bearings, reversible rotation, 1075 RPM, 48Y (5.6" OD) frame, 1 phase, 60 Hertz, stud/belly band mounting, 36" lead, 208-230 volts, 1.4 rated Amps, 4" motor body, 1/2" x 6-1/2" w/flat shaft diameter.

Item Condenser Fan Motor Motor Type Permanent Split Capacitor Enclosure Open Air-Over HP

FIRST CHOICE CONDENSER FAN MOTOR 1/3 HP - 208-230 VAC - 60 HZ 1075 RPM - 7.5/370 UP CAP FLA 2.8 - REVERSIBLE ROTATIONS - BALL SHAFT SIZE 1/2 X 5 CROSS REFERENCE: AO SMITH FSE1036S, EMERSON 1861, FASCO D908, GE 3729, WAGNER WG840729 MSDSREF: 319/2

Emerson 1860 Condenser Fan Motor Replacement motor Nordyne 917280 for Miller MSC-24,30 & 36 1/4 HP, 208-230 Volts, 1.7 Amp, 1075 RPM, Capacitor 5 MFD/370 Volt, Shaft 1/2" x 5", Rotation Reversiable, Frame 48y, Mount Stud/Band

UP FOR SALE ROOM AIR COND MOTOR , HERE ARE THE SPECS :

SquareTrade © AP6.0

Product Description Removes fan blades and blower wheels that are frozen to a motor shaft. Can be used to apply pushing or pulling force. Included is 4 pulling hooks, 3 set screws and an allan wrench.

FBP100--FAN BLADE PULLER 5/8" steel center shaft, 4 pull fingers Alignment tool included, flats for wrench, Fine Thread. Fan Blade Blower Wheel Hub Puller/ Pusher Tool

SUPCO FBP100 FBP100 - Fan Blade Puller Features • Sturdy, heavy duty steel • 5/8” steel center shaft • 4 pull fingers • Alignment tool included • Has flats for wrench • Fine thread version provides additional torque & pulling power

This blade puller isnt one of the cheap replicas it is made in U.S.A., very nice and in top condition. Never ever been used. Comes with all puller parts and original users manual.

DELHI BLOWER FAN IN GREAT CONDITION 3/4" SHAFT--12"FAN----6" PULLEY USED AND EASILY REPURPOSED INS. REQUIRED ON EVERY PURCHASE AND IS INCLUDED IN SHIPPING COST.

var itemNumber = window.ebayItemID ?