shaft fan for sale, brand-new and used.

THIS FAN MOTOR IS NEW, EXCESS INVENTORY. IT IS A BELLY BAND MOUNT FOR VERTICAL SHAFT UP. IT HAS A RAIN SLINGER ON TOP.

1.3NM HYBRID STEP 76MM STEPPER 1.2 MOTOR LONG 3-PHASE LEADSHINE 573S15

BLM HALL BLM57180 SERIES MOTORS 3 120 LEADSHINE'S PHASE DEGREE SENSOR:

This was Removed from a Tektronix 2465, the motor is good and only had a broken Fan Blade shaft, it will be included with motor maybe you can glue the plastic shaft coupler and use it. I can supply the motor with 12 volts and heat the pcb area that has the thermistor and the motor will speed up, then touch it with my cold Finger and it slows down, this is sold as is as you could Damaged the PCB if you do not hook it up properly.

Being offered is one (Two are pictured) Slatterback KB30 These came from a working environment but I don't know enough to fully test so it is being sold as is as pictured. Please ask any questions.I can ship but you must arrange a truck. I can stretch wrap and load for free and if you need a crate I can have it crated for time and materials.

INDUSTRIAL BALDOR 3/4HP THREE PHASE W/ 16" FAN

Ametek 117123-00 Three stage, 240 volt, 5.7"/145mm diameter, Double ball bearings, Single speed, Tangential bypass discharge, Aluminum fan end bracket, Aluminum commutator bracket

Engineered Air Systems MA-3D portable AC Unit. 240,000 btu John Deere 4 cylinder engine that runs perfect. Has new engine oil and antifreeze.

New!!!!!!!!!!!!! Keco Centrifugal Squirrel Cage Fan 12061-100, AN/FPS-124, 4130-01-306-9532, 3/4" shaft. Brand new in the box.

T.P.I. P3P5530T Electric Washdown Heater 480V, 3 Ph, 102390 BTU, Markel 713566

NEW DAYTON 1/11 HP FAN BLOWER MOTOR

You are Looking at a USED UNIVERSAL IN PIPE BOOSTER FAN WITH THE SHAFT LENGTH AND FAN SIZE AS NEAR AS I CAN TELL IT WOULD NEED A 7" OR LARGER DIA PIPE TO FIT INSIDE .115V AC MOTOR IS USED BUT RUNS GOOD . Buyer pays the Shipping from 44624 Shown on the E bay Shipping Calculator which should be close to actual . If any questions or unsure of something , E mail , Thanks for looking

Here is Actual Picture you will get this Ametek Motor with cable to switch lo/hi and 120 volts plug The motor is very rare and very fastest spinning around 20,000 rpm !!!! The Shaft Dia is 0.320" in ( 8.12 mm ) size 1.25 inch ( 32 mm ) Long Motor weight about 3-1/4 pound

Three-Phase Condenser Fan Motors Continuous Duty, Air Over, Reversible A: 10-1/8"; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 60; Bearing Type: Dbl-Sld Ball; Efficiency: 75.0%; Efficiency Level: STD; Enclosure: OAO; F/L Amps: 5.30; HP: 1; Hz: 60; Insulation Class: B; Mfg. #: H667; Mounting: Thru-bolt/Belly band; NEMA Frame: 56Y; Phase: Three; RPM: 1140; Service Factor: 1.00; Shaft Diam.: 5/8"; Shaft Length: 6"; Std.

Genuine U.S. Military Issue Surplus GE Aviation Systems LLC - Aluminum Electrical Fan Blade - P/N: G5572 (NOS)   (NOS) = New Old Stock P/N: G5572   NSN: 4140-00-717-5830  Characteristics Diameter: 4.293 inches nominal Blade Quantity: 8 Attachment Method: Keyway Material: Aluminum overall Style Designator: Straight tip 4 5/16" Diameter x 5/8" Length 9/16" Inner Diameter for the for the keyed shaft port. Similar to the one in the picture.  Unused!

Here is a very nice squirrel cage blower pulled from a ECM 2.3 motor I have listed. This cage measures about 12 7/8 inches in diameter, it stands about 9 1/2 inches tall and has a 1/2 inch hole for the motor shaft. This unit runs true and looks as if it has seen very little use.

DAYTON 4YU34 BELT DRIVE FAN & BLOWER MOTOR. This item is brand new and still in factory box. If you have any questions, please feel free to ask, and thanks for shopping at Carcass Collectibles!