shaft sleeve for sale, brand-new and used.

You are considering a brand-new Packard oil burner furnace motor. Item is new (old stock) and came from the inventory of a local heating/cooling repair man who is easing into retirement. The item was still sealed in original box and opened for the first time by me for the pictures in this listing.

PROTECH Condenser Motor - 1/5 hp 208-230/1/60 (1075 rpm/1 speed) 51-23055-11 Technical Data: HP: 1/5 No. of Speeds: 1 High Speed (RPM): 1075 Input Voltage (V): 208 Input Voltage (V): 230 No. of Phases: 1 Frequency (Hz): 60 Rotation Direction (OSE): Reversible Run Capacitor (uF/V): 3/370 (230V), 5/370 (208V) FLA at 230V (A): 1.30 Shaft Diameter (in.): 1/2 Motor Body Diameter (in.): 5-5/8 Keyed/Fla

Condenser Fan Motor Item #: 1859 1/6HP Totally Enclosed Condenser Fan Motor 5.6" Diameter, Totally Enclosed Air Over (TEAO) 140°F (60°C) Ambient Design Sleeve Bearings have All Angle Thrust System Class B Insulation Extended Studs 30" Leads Hubless Lead End Drain Holes Both Ends Automatic Reset Thermal Overload Protector Continuous Duty HP: 1/6 No. of Speeds: 1 High Speed (RPM): 1075 Input Voltage (V): 208 Input Voltage (V): 230 No.

New in box that has never been openedFactory packaging Magnetek 579 electric motor 1/50HP Shaded Pole #588-516 82121RPM 3300Volts 115Amps 1.4Speeds 1Bearing: SleeveRotation: CWSEShaft 5/16 x 2-1/8Cross Ref: BDP Unit 397H, 395B, 376BCarrier Part #HC23UE121A, HC23UZ115UE Model JA1M086 S88-516

YOU ARE BIDDING ON Direct Drive Blower Motor, Permanent Split Capacitor, Open Air-Over, 1/6 HP, 1075 RPM, Number of Speeds 1, Voltage 208-230, 1.1 Full Load Amps, 48Y NEMA Frame, Body Diameter 5 5/8 In, 1.0 Service Factor, 60 Hz, Ring/Stud Mounting, Sleeve Bearings, Auto Thermal Protection, Shaft Length 5 1/16 In, CW/CCW Rotation, Capacitor Required 2GE76 or 2MDV4, Ambient 60 C, Insulation Class B, Length Less Shaft 4 7/16 In MODEL # 442A MFR : A.O.SMITH LOCATION : W1STOR24MA54JHGJFG

Dayton 1/30 HP 3M557 Shaded Pole Motor 115 Volts 60 hz cw rotation facing shaft sleeve bearings stud mounted totally enclosed thermally protected continuous duty 5/16" dia. shaft

HVAC 3.3 In Diameter Motor, Shaded Pole, Open Air-Over, 1/30 HP, 1550 RPM, 115 Volts, Full Load Amps 1.2, Non Standard NEMA/IEC Frame, Service Factor 1.0, Ambient 40 C, 60 Hz, Number of Speeds 2, Insulation Class B, Rotation CW, Thermal Protection Auto, Mount Stud, All Angle, Self-Aligning Sleeve Bearings, Shaft Dia 5/16 In, Shaft Length 2 1/16 In Item Motor Type

AVAILABLE FOR SALE MOTOR , HERE ARE THE SPECS : Motor Application HVAC/R Motor Sub Application Direct Dr Fan/Blower Motor Type PSC Enclosure Open Air-Over HP 1/2 to 1/6 Nameplate RPM 1075 Voltage 208-230 Full Load Amp 3.6 Hz 60

A.O. Smith F48E60A01 1/3HP Unit Heater Motor 1Ph 115V US1036NB 1075RPM Opened for Picturing Purposes 1/3HP, 115V, 1075RPM, 60Hz, 5.3 Rated Amps, 1 Phase Frame: 48Y, Sleeve Bearings Shaft: 0.5 x 3.0 Flat Automatic Protector Please take a look at all of the pictures, what you see in the pictures is what you will receive. Thank you.

Listed is a fasco D261 electric motor pulled off a trane unit heater (model # GPNCO30ADA1000). The unit heater was condemned with a bad heat exchanger, but this motor was replaced not too long before it was condemned cause it looks brand new! I tested this motor on both speeds and rotation, and works perfectly, and its quiet!

Technical Specs Item Unit Bearing Motor Motor Application HVAC/R Motor Sub Application Refrigerator/Freezer Motor Type Shaded Pole Enclosure Totally Enclosed Air-Over HP 1/125 Nameplate RPM 1550 Frame Nonstandard

Item Condenser Fan Motor Motor Type Permanent Split Capacitor Enclosure Open Air-Over HP

New In Box Unused Surplus New Old Stock Magnetek AO Smith Universal Motor 1/20HP 1450 RPM 1.1 AMP 3.3 Frame Shaded Pole OPAO Enclosure CWSE Rotation 60 Hz Sleeve Bearing 5/16 x 2 1/2 Shaft Made In Mexico P/N#: AO1154 JA2R140N 396 ?FREE PRIORITY SHIPPING SAME DAY IF PURCHASE IS MADE BY NOON CST?

Century (Formerly A.O. Smith) D1076 3/4 HP 208-230V Direct Drive Blower Motor. Motor is unused but was installed and realized it was a wrong motor so it may have few scratches.

AO SMITH 757 DUAL SHAFT BLOWER FAN MOTOR 1/12-1/20-1/25 HP, 115V, 1550 RPM, 3 SPEED, 3.0/2.1/1.7 AMPS, CCWLE ROTATION, SLEEVE BEARINGS, 5-3/4" X 5/16" X 5-3/4" SHAFT THIS IS NEW IN A SLIGHTLY DISTRESSED BOX, OLD STOCK ITEM.

UP FOR YOUR CONSIDERATION IS A NEW OUT OF BOX FOR PICTURES ONLY