shaft sleeve for sale, brand-new and used.

* HURST MANUFACTURING Gearmo

Yancy Magnetic Drill Press 2.5” Trav

protech -gentaq--direct drive motor--rpm/1080---3 speeds--115volts--15.00/370 capacity ccw-7.9 amps/sleeve bearing/12x3.7 shaft---new in box---please make sure this is the right part for your unit--any questions please ask--thanks.

MP Pumps FLOMAX 8 Cast Iron PUMPAK — 6000 GPH, 40 PSI, 2 x 2 FLOMAX 8 self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25' above the source. Once primed, the pump's built-in flkapper valve will maintain a full column of liquid in the suction line. A FLOMAX PUMPAK is a fully assembled and run tested pump end that can be easily coupled to any 3 or 5.5 HP gasoline engine standard 3/4" keyed shaft engine.

Click to Enlarge Click to Enlarge

Keystone Reamer & Tool Co. Ford Special Reamers No. 8 Set 2559 Hub Cam Shaft 3320 BC Trans Daiven Sleeve 3521 3059 1/2 Push Rod & Steering Gear 3314 1/2 Cam Shaft Bearings 2713-14 Ford Spindle 3820 3844 Front & Rear Spring Bushings 3022 1/2 Trans Triple Gear 3042 3043 3044 3545 3521 Wrist Pin

TACO High Quality Pro-Fit® Motors High quality Pro-Fit® motors are designed to replace all Bell & Gossett* and Armstrong** motors up to 3 HP. Permanently lubricated, sleeve bearing or ball bearing construction make ProFit® replacement motors maintenance free. All motors are fitted with rigid, steel mounting cradles with resilient motor mounts to facilitate easy alignment of motor and pump shaft and ensure quiet, vibration-free operation.

ebay template Gates 1610 35MM Taper-Lock Bushing, 35mm Bore, 1.0" Length, 1.6" Max Bore Whats Included: This Gates Taper-Lock bushing is suitable for use with same-type sheaves, sprockets, and pulleys in power transmission applications that require synchronous rotation and have metric dimensions. The carbon steel bushing provides strength and resistance to wear and includes mounting bolts and washers. Taper-Lock sheaves, sprockets and pulleys (n

ebay template Gates 2517 2.1/8 Taper-Lock Bushing, 2-1/8" Bore, 1.7" Length, 2.5" Max Bore Whats Included: This Gates Taper-Lock bushing is suitable for use with same-type sheaves, sprockets, and pulleys in power transmission applications that require synchronous rotation. The carbon steel bushing provides strength and resistance to wear and includes mounting bolts and washers. Taper-Lock sheaves, sprockets, and pulleys (not included) are availa

Pacer Water Pump — Model# SEB2PLE5.5 Water and chemical transfer pump is powered by a 6 HP LCT engine. 120ft. head and self-priming thermoplastic pump with glass reinforced polyester housing.

New BRIGGS & STRATTON 35HP Vanguard Series Horizontal Shaft Replacement Engine This item is located at ACME TOOLS 700 20th. Ave. SE, Minot ND, 58701.

F-124-3ta15 The item you are bidding for is Thomson OPN324864, Ball Bushing Bearing, Precision Steel, A Grade, Open, The item is new Linear ball bearing for low-friction linear movement on a shaft Hardened steel outer sleeve for strength and resistance to wear

BRAND NEW IN BOX FAST, FREE AND SAFE SHIPPING TO THE LOWER 48 STATES

UP FOR SALE FAN MOTOR , HERE ARE THE SPECS : Motor Application HVAC/R Motor Sub Application Pedestal Fan Motor Design Shaded Pole Motor Enclosure Design Open Air-Over HP 1/15 Nameplate RPM 1550 Voltage 115

Click Here. Double your traffic. Get Vendio Gallery - Now FREE!

A.O. SMITH 4UU68 115/208-230 VAC BLOWER HVAC BLOWER MOTOR, 1/4 HP 1550 RPM 4-SPEED, 1/2" X 4.5" SHAFT, SLEEVE BEARING. BRAND NEW, NEVER USED, NEVER INSTALLED.

5-1/2" x 1/4" Standard Chromed Brass Beer Shank Assembly Used for draft systems or kegerators. Has 7/8" diameter shaft with standard 5/8" BSP threads. This beer shank assembly has a 1/4" bore and comes with a plastic flange, shank sleeve, faucet coupling nut and flanged lock nut.

Franklin 2343188602G Submersible Water Well Motor 7.5 Horsepower 230 Volts 60 Hz 1500 Thrust Motor Lead: Yes The Franklin 4-inch Super Stainless motor has been the

Apollo 71-500 Series Bronze Ball Valve, Two Piece, Inline, Spring-Close Lever, 1/2" NPT Female The Apollo 71-500 series two-piece inline ball valve is made of bronze and has a spring-close lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass and has a stainless steel spring-close handle with a vinyl sleeve for manual on/off control.

Like new motor. Doesn't have mounting hardware. Direct Drive Blower Motor.