shell mill holder for sale, brand-new and used.

This is a Brown&Sharpe #9 taper shell mill/cutter holder for use with 1 1/2" bore shell mills/cutters. It has a 1/4" keyway and the cutter shoulder is 1 5/16" wide. It is 7" long overall.

This is a Brown&Sharpe #9 taper shell mill holder for use with 1" bore shell mills. Overall length is 7" and has a 5/16" key and has a 3/8" threaded hole for a draw bar. The cutter shank is 1 5/8" wide.

Echoes from the Oil Country (American Machinist Memories), Volumes 1 through 5, originally published in American Machinist magazine in 1901-02. Republished by Lindsay Publications, Bradley, IL, 2005. Each book is 5 1/2 x 8 1/2 paperback.

LISTING IS FOR A USED BT50 SHELL MILL ARBOR with SHELL

Bison Shell Arbor Mill Holder R8 NEW PICK ONE Each Supplied With One Arbor Nut EACH $105.00 PICK ONE At Checkout Time : Note to Seller On Pay-Pal ?

YOU ARE BIDDING ON A CAT 40 SHELL MILL HOLDER NEW HAS A SHAFT 1 1/2" ANY QUESTIONS PLEASE EMAIL ME

Oscar precision tooling.  CAT40.  SEM. 1x2.062.  Catalog # 04501475

Used - Good Condition - Had some small dings on the shank which have been stoned away - Universal 467152 Cat 50 V Flange Shell Face Mill Holder 2" Diameter x 0.95" Tall Pilot. 3/4" Wide x 0.395 Tall Keys. 2-1/2" Diameter Nut Head.

Used - Good Condition - Had some small dings on the shank which have been stoned away - Universal 467152 Cat 50 V Flange Shell Face Mill Holder 2" Diameter x 0.95 Tall Pilot. 3/4" Wide x 0.53" Tall Keys. 4 ea.

Used - Good Condition - Had some small dings on the shank which have been stoned away - Universal 467152 Cat 50 V Flange Shell Face Mill Holder 2" Diameter x 0.95 Tall Pilot. 3/4" Wide x 0.4" Tall Keys. 2-1/2" Nut Head Diameter.

Used - Good Condition - Had some small dings on the shank which have been stoned away - Universal 4610508 Cat 50 Extended Shell Face Mill Holder 2" Diameter x 0.99 Tall Pilot. 3/4" Wide x 0.395 Tall Key. ~5" Gage Length.

Used - Good Condition - Had some small dings on the shank which have been stoned away - Ingersoll C50 255M240 Cat 50 V Flange Shell Face Mill Holder 2-1/2" Diameter x 1.17" Tall Pilot. 1" Wide x 0.52" Tall Keys. 4 ea.

1 Face and Shell Mill Driver1 1/2" diameter short1 7/8" diameter Ship USA only

Lot of Milling Lathe Machine Precision Shell Mill Holder Tool and Die 1/2" etched on some of the pieces. Please inspect photos will send in Medium Flat Rate

KAISER FINISH BORING HEAD WTH BT-50 TAPER; IN VERY GOOD CONDITION; THE BT-50 HOLDER IS MARKED KAISER C326.352 AND THAT COMPONENT IS MFG. BY KAISER IN THE USATHE SPACER IS MARKED 331.555 (CKS5xCKS5x90) AND IS SWISS MADE; THE ADJUSTABLE BORING HEAD IS MARKED KAISER 310.511 AND IS SWISS MADE; OVERALL THIS TOOL MEASURES APPROX. 13.5" (NOT INCLUDING THE RETAINING PLUG).

We sell high-quality industrial surplus at discounted prices. While we take every effort to inspect and test each item we sell, we do not have the capability to fully evaluate many of the items we sell. All items are sold as is with no warranty (unless otherwise specified) and are non-returnable.

This is a new in box Command CAT45shell mill adapter, part number C5S4-0750, .750 pilot diameter.

1" BT SHELL MILL HOLDER