Signametrics SM-1020/SM1020 Master+Slave Func/Arb/Pulse Waveform Generator Set, US $891.99 – Picture 0

Signametrics SM-1020/SM1020 Master+Slave Func/Arb/Pulse Waveform Generator Set, US $891.99 – Picture 1

Signametrics SM-1020/SM1020 Master+Slave Func/Arb/Pulse Waveform Generator Set, US $891.99 – Picture 2

Signametrics Sm-1020/sm1020 Master+slave Func/arb/pulse Waveform Generator Set

US $891.99

Phoenix, Arizona, United States
Jun 9th

Open on mobile:
QR code

Signametrics SM-1020/SM1020 Master+Slave Function/Arbitrary/Pulse Waveform Generator Boards - 300 kHz, 12-bits ea. Comes with what you see in the pictures. If you don't see it, you probably wont get it. Specifications are from a Signametrics and may vary slightly due to upgrades, options, or revisions this unit may or may not have. These units are guaranteed to work. The Unit's Information Tags Reads: Model Number: SM-1020 Description: The SM-1000 family of function, arbitrary wave form, and pulse generators offers a complete set of modular solutions to a wide range of test stimulus requirements. SM-1000 series boards occupy a single, full size PC ISA bus slot. The four members of the product family can either be used independently or in combination to provide modulated or synchronized waveforms. Direct Digital Synthesis (DDS) is used in all SM-1000 series wave generators. DDS delivers accurate output at any frequency for either standard or arbitrary waveforms. All signals are synthesized using a constant point update rate well above the output frequency. The result is output signals that are free of low frequency aliases characteristic of generators using a variable clock rate to output stored standard or ARB waveforms. PC overhead is kept to a minimum. SM-1000 series generators operate independent of the PC once signal parameters have been set. Ten standard wave forms are available. The arbitrary wave function is implemented with an 8K sample memory. ARB set up is very straightforward requiring only an ASCII table that can easily be created in a spreadsheet. The virtual front panel provides mouse point and click control of the SM-1000 in DOS or Windows. Drivers are provided for Visual Basic, C, and ATEasy. Hardware: 10 standard wave forms plus Gaussian noise Arbitrary waveforms stored in 8 K word memory Direct Digital Synthesis (DDS) with high speed updateeliminates low frequency aliases Fine frequency resolution Low phase noise Multiple SM-1000 series generators link together for complex signals Function and arbitrary waveforms up to 3 MHz with point update rates to 16 M Samples/sec. Pulse generation rep rate to 5 M pulses/sec. CE approved Software: "No Programming" front panel for Windows with sources Language support - Visual Basic, Quick Basic, Visual C++, Quick C, Borland C++ Package support - driver for ATEasy, DLLs for Matlab, LabWindows CVI, and TestPoint and more Specifications: System Requirements: XT, AT, 386, 486 Pentium, Pentium-Pro, or compatible Waveforms: Sine, square, pos/neg ramp, triangle, havertriangle, haversine, trapezoid, exponential, sine(x)/x, noise (with variable spectra), ARB Trigger Modes: Continuous, Triggered, Burst, Gated, Gated/phase-hold, polarity, S/W, or H/W Triggered Burst: 1 to 255 cycles Synthesis: Direct Digital Synthesis (DDS), 8k Wave Table Vert. Resolution: 12 bit Sampling Rate: 6.25 kS/sec. to 10 MS/sec. Amplitude: Range: 0 to 8 volts p-p (terminated), 0 to 16 volts p-p (unterminated) DC-Offset: 0 to ±2 volts (terminated), 0 to ±4 volts (unterminated) Compliance: ±10 volts (signal + offset) Flatness: +0.2 dB to 100 kHz Impedance: 0 or 600 ohms Output Filter: Selectable: RC or Butterworth Phase Control: ±180° in 0.1° steps Distortion and Noise: Typical Sine Wave Distortion THD f < 20 kHz: < 0.15% THD f < 1 kHz: < 0.05% THD Spurious: 72 dBc. Typ. Noise Floor: 72 dBc. Typ. Bandwidth: DC to 300 kHz Wave Frequency Resolution: fclock/228 Pulse Generator: Rep. Rate: 0.01 Hz to 5 MHz Pulse Width: 100 ns to 100 Sec Output BW: 0.01 Hz to 100 kHz (analog output), 0.01 Hz to 5 MHz (pulse output - TTL) Rise/Fall Time: 10 ns (typical) Inputs/Outputs: Output BNC: Waveform output, SYNC, TTL Pulse Input BNC: Trigger/Gate Aux I/O: 16 pin ribbon connector (master-slave cable) For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a $10.00 minimum for packaging, handling, and order processing. International shipping to be determined by destination. Prior to shipment I need to know the following information: (1) Are you the end-user of this item? (2) If you are not the ultimate end-user of the item, please state the ultimate end user's name. (3) What is the ultimate country destination? If you have any questions please call Michael at 1-866-MHZ-ELEC (1-866-649-3532) Toll Free. Also, please click here to view or other auctions! 08/13/15 Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

“These units are guaranteed to work.”

Manufacturer	Signametrics
Model	SM-1020