For sale is a 100 watt 12 volt silicone pad heater with 3M adhesive on the back side. It gets up to and holds 160 degrees Celsius or 320 degrees Fahrenheit . This can be used to heat biodiesel , waste vegetable oil ( WVO , SVO ) fuel tanks.
For sale is a 25 watt 12 volt silicone pad fuel line heater with 3M adhesive on the back side. This can be secured along fuel lines or hydraulic lines using Kapton high temperature tape. It gets up to and holds 160 degrees Celsius or 320 degrees Fahrenheit .
For sale is a 200 watt 12 volt silicone pad heater with 3M adhesive on the back side. It gets up to and holds 160 degrees Celsius or 320 degrees Fahrenheit . This can be used for waste vegetable oil , diesel or biodiesel tanks or hydraulic reservoir tanks.
For sale is a 200 watt 12 volt silicone fuel filter heater with spring and hook attachments. These prevent fuel from gelling inside the filter on cold days. These can be used for waste vegetable oil , biodiesel or diesel fuel.
For sale is a 200 watt 12 volt silicone fuel filter heater with spring and hook attachments. This heater will help keep hydraulic fluid / oil flowing smooth during cold weather. These can be used for waste vegetable oil , biodiesel or diesel fuel.
For sale is a 60 watt 12 volt silicone pad fuel line heater with 3M adhesive on the back side. This can be secured along fuel lines or hydraulic lines using Kapton high temperature tape. It gets up to and holds 160 degrees Celsius or 320 degrees Fahrenheit .
For sale is a 120 watt 12 volt silicone pad fuel line heater with 3M adhesive on the back side. This can be secured along fuel lines or hydraulic lines using Kapton high temperature tape. It gets up to and holds 160 degrees Celsius or 320 degrees Fahrenheit .
For sale is a 120 watt 12 volt silicone pad fuel line heater with 3M adhesive on the back side. This can be secured along fuel lines using Kapton high temperature tape. It gets up to and holds 160 degrees Celsius or 320 degrees Fahrenheit .
For sale is a 60 watt 12 volt silicone pad fuel line heater with 3M adhesive on the back side. This can be secured along fuel lines using Kapton high temperature tape. It gets up to and holds 160 degrees Celsius or 320 degrees Fahrenheit .
the 12 inch piece will be CUT from the pictured roll PTFE Coated Fiberglass Fabric With Silicone Adhesive Tape12" x 13mm widePTFE is the generic term for Teflon i used this to replace the strip under the heating wire on a heat seal unitit was slightly wider than i needed but it doesnt matter as long as it stays put
For sale is a 200 watt 120 volt silicone fuel filter heater with spring and hook attachments. These prevent fuel from gelling inside the filter on cold days. These can be used for waste vegetable oil , biodiesel or diesel fuel.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
