sleeve nut for sale, brand-new and used.

Champion w-89d spark plugs, nos, hit and miss engine, vintage stationary engine for sale

Champion w-89d spark plugs, nos, hit and miss engine, vintage stationary engine

  • McClure, Pennsylvania, United States
  • Jun 6th
For sale is one (1) NOS Champion W-89D spark plug. These spark plugs were stored in a damp environment resulting in the original packages being destroyed and the spark plugs having some minor surface rust and oxidation. I used a small brush to clean the spark plugs enough to verify them to be in good condition.
Champion w-89d spark plugs, nos,  hit and miss engine, vintage stationary engine for sale

Champion w-89d spark plugs, nos, hit and miss engine, vintage stationary engine

  • McClure, Pennsylvania, United States
  • Jun 6th
For sale is one (1) NOS Champion W-89D spark plug. These spark plugs are NOT in their packages as I had removed each one to verify its condition. These spark plugs had been stored in a damp environment resulting in the packages being destroyed and the spark plugs having some minor surface rust.
Apollo 70-140 series bronze ball valve with stainless steel 316 ball and stem, t for sale

Apollo 70-140 series bronze ball valve with stainless steel 316 ball and stem, t

  • Franklin, Tennessee, United States
  • Jun 6th
payment | shipping rates | returns Apollo 70-140 Series Bronze Ball Valve with Stainless Steel 316 Ball and Stem, Two Piece, Inline, Latch-Lock Lever with Nut, 3/4" NPT Female Product Category : Miscellaneous UPC : 670750660269 Title :
Dynamic microphone 600ohm impedance with wire for sale

Dynamic microphone 600ohm impedance with wire

  • El Sobrante, California, United States
  • Jun 7th
dynamic microphone 600ohm impedance cannon type connector, CONDITION: NEW , MICROPHONE ONLY SENSITIVITY -77DBFREQUENCY RESPONSE: 60-17000hz(-8DB)ON/OFF SWTICHUNI-DIRECTIONALMicrophone wire (approximately 3m = 10 feet)INTERNAL CODE(item location, box E)
Fowler 52-243-220-1 rod inside micrometer 2-20" for sale

Fowler 52-243-220-1 rod inside micrometer 2-20"

  • Manchester, New Hampshire, United States
  • Jun 7th
Fowler extension rod type Inside Micrometers have a wide measuring range—any one single micrometer can replace many bar type inside micrometers. • Set consists of an inside micrometer head and a series of fully hardened and lapped extension rods of different lengths all with carbide measuring faces • Anvil and spindle are hardened and precision ground with microlap finish on ends.
Draft warehouse beer shank assembly-stainless steel, 3-...new item free ship usa for sale

Draft warehouse beer shank assembly-stainless steel, 3-...new item free ship usa

  • United States, United States
  • Jun 7th
Draft Warehouse Beer Shank Assembly-Stainless Steel, 3-1/8-Inch Long with-1/4-Inch Bore Complete shank with Backnut, Coupling nut, flange, sleeve attached. Comes fully assembled. Shank length is 3-1/8 inches.
Speedaire aluminum air cylinder, 3-1/4" bore x 12" stroke, double acting /hi1/rl for sale

Speedaire aluminum air cylinder, 3-1/4" bore x 12" stroke, double acting /hi1/rl

  • Saint Peters, Missouri, United States
  • Jun 9th
Speedaire Aluminum Air Cylinder Mfr. Number: 5UZJ7 Cylinder Type: NFPA Style: Double Acting Bore Size: 3- 1/4" Stroke Length: 12" Port Size: 3/8" NPT Maximum Working Pressure: 250 PSI Cushion Type: Adjustable Temperature Range: -20° to 200° F Maximum Load: 2073 Lbs Rod Diameter: 1" Rod Thread Size: 3/4"- 16 Rod Thread Length: 1- 1/8" Mounting Style: Side Tapped/Sleeve Nut Material: Aluminum Piston Rod Material: Chrome Plate Steel Overall Length: 18- 3/4' FREE SHIPPING! (1013)
New speedaire - 8" stroke, 1.5" bore double acting air cylinder - 4mu26 for sale

New speedaire - 8" stroke, 1.5" bore double acting air cylinder - 4mu26

  • Bremen, Indiana, United States
  • US $179.99
  • Jun 9th
NEW SURPLUS SPEEDAIRE MODEL: 4MU26 8" Stroke, 1.5" Bore Double Acting Air Cylinder Specifications ITEM
Starrett micrometer, s436.1axrlz 3/set, 0-3" range, carbide faces new!! for sale

Starrett micrometer, s436.1axrlz 3/set, 0-3" range, carbide faces new!!

  • Cleveland, Ohio, United States
  • Jun 9th
Brand New Starrett S436.1AXRLZ 436.1 Series Outside Micrometer Set, Ratchet Stop, Lock Nut, Carbide Faces, 0-3" Range, 0.001" Graduation. Best Price anywhere!!! International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost.
Speedaire non-rotating air cylinder 6zc47b usa 150 psi for sale

Speedaire non-rotating air cylinder 6zc47b usa 150 psi

  • Escondido, California, United States
  • US $199.95
  • Jun 9th
Speedaire Non-Rotating Air Cylinder Model No. 6ZC47B 1 1/8" Bore Diameter 1" Stroke 150 PSI
Mitutoyo 571-262-10 digimatic depth gage 0-8” new sealed for sale

Mitutoyo 571-262-10 digimatic depth gage 0-8” new sealed

  • Houston, Texas, United States
  • US $250.00
  • Jun 9th
Mitutoyo 571-262-10 Absolute Digimatic Depth Gage; 0-8"/ 200mm Rating IP67 Electronic Digital Depth Gage (NO HOOK)SPC Output: YES
1/4" x 2 1/4" sleeve anchor acorn nut low carbon steel zinc plated pk 25 for sale

1/4" x 2 1/4" sleeve anchor acorn nut low carbon steel zinc plated pk 25

  • Libertyville, Illinois, United States
  • US $15.03
  • Jun 9th
1/4" x 2 1/4" Sleeve Anchor Acorn Nut Low Carbon Steel Zinc Plated Pk 25 For Customer Service Call 1-888-660-0334 Click a link below for Fastener Technical Specs Bolt Markings and Grades Flat Washer Dimensions
Atlas lathe quick change gear sleeve  9-73a for sale

Atlas lathe quick change gear sleeve 9-73a

  • Williamston, Michigan, United States
  • US $6.95
  • Jun 9th
For sale is ONE change gear sleeve. USED part number 9-73A I have two for sale but you are buying ONE. Both sleeves have a nice working surface but both have corrosion on the clamp surface where the nut or quadrant contact.
Hydraulic fittings 37 degree -16 1" jic nut,sleeve tube straight con. steel zinc for sale

Hydraulic fittings 37 degree -16 1" jic nut,sleeve tube straight con. steel zinc

  • Wausau, Wisconsin, United States
  • US $32.45
  • Jun 9th
Hydraulic Fittings 37 Degree Flare -16 1" JIC (4) Nuts and Sleeves 1" Tube Straight Connector Steel, Zinc Plated
Dayton  6x395 air cylinder , double acting , bore 3-1/4" , strock 4" , 3/8" npt for sale

Dayton 6x395 air cylinder , double acting , bore 3-1/4" , strock 4" , 3/8" npt

  • Naperville, Illinois, United States
  • US $148.95
  • Jun 9th
UP FOR SALE AN AIR CYLINDER , HERE ARE THE SPECS : Single Acting/Double Acting Double Acting Cylinder Type NFPA Bore Dia .3-1/4" Stroke 4" Mount Side Tapped/Sleeve Nut Port Size 3/8" NPT Features Sq. Head, Piston magnet, Adjustable Cushions Max. Pressure 250 psi Cushion Type
sleeve nut for sale, Parker triple-lok 37 deg. nut sleeve locknut btx 10-btx-ss newsleeve nut for sale, King arthur's combo twice as many teeth cutting materia plus "universal nutsleeve nut for sale, Lancelot /squire combo  disc twice as many teeth cutting wood plus nut #72218sleeve nut for sale, 3 pcs expansion bolt m12 x 120mm hex nut sleeve anchors toolsleeve nut for sale, M8 x 70mm hex nut sleeve anchors tool metal expansion bolt 2 pcssleeve nut for sale, M6 x 80mm taper head hex nut sleeve expansion anchor screws silver tone 5 pcssleeve nut for sale, Bale spear spike hd heavy duty 3500lbs 49" with sleevesleeve nut for sale, Hillman 1/2 x 3"  hex nut sleeve anchors for concrete, brick, block lot 12sleeve nut for sale, 3/8" x 3" sleeve anchors zp (50 pieces)sleeve nut for sale, 5 pcs m8 x 60mm hex nut sleeve expansion anchor screwssleeve nut for sale, Qty-10 pz -  5/8 in. x 6 in. hex nut head hlc sleeve anchorssleeve nut for sale, Lasco 19-5203 compression fitting with integral sleeve nut and 1/4-inch od,sleeve nut for sale, Lasco 19-5207 compression fitting with integral sleeve nut and 3/8-inch od nutsleeve nut for sale, 100 pcs m2 dia 2mm hex screw nut stainless steel nuts good quality diy newsleeve nut for sale, New~qty (10) parker triple-lok~swivel nut run tees 37° flare / 37° swivel / 37°sleeve nut for sale, Parker ferrule flareless ferulok nut locknut tu 4tu-ss-bp sleeve newsleeve nut for sale, Starrett 224erlz micrometer o/s 16-20" 50784 - no standardssleeve nut for sale, Starrett 724lz-54 micrometer o/s 48-54"sleeve nut for sale, Starrett 724lz-36  & 724lz-60 micrometer one box - one set anvils  no standardssleeve nut for sale, Starrett 483mxrl-25 v anvil micrometer, ratchet stop, lock nut/carbide faces,

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies