+ Post new Ad
SLIDE HAMMER MACHINIST MADE VERY NICE, US $30.00 – Picture 0
SLIDE HAMMER MACHINIST MADE VERY NICE, US $30.00 – Picture 1
SLIDE HAMMER MACHINIST MADE VERY NICE, US $30.00 – Picture 0
SLIDE HAMMER MACHINIST MADE VERY NICE, US $30.00 – Picture 1

Slide Hammer Machinist Made Very Nice

US $30.00

  • Wappingers Falls, New York, United States
  • Jan 30th
Open on mobile:
QR code
THIS IS A NICE MACHINIST MADE SLIDE HAMMER WITH A 3/8" X 16 FEMALE THREAD. IT COMES WITH ONE MANDREL THAT IS 1/4 X 20 THREAD. VERY NICELY MADE. IT IS ABOUT 12" LONG. I WILL COMBINE MULTIPLE PURCHASES TO SAVE ON SHIPPING. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!!!!!!

Directions

Similar products from Tools for Lathe Machines

Clausing Atlas 12" Metal Lathe Series 100 MK2 " Tail Stock " 1940's as parts

Clausing Atlas 12" Metal Lathe Series 100 MK2 " Tail Stock " 1940's as parts

  • Rimrock, Arizona, United States
  • Jan 30th
Steady rest for Atlas 6 inch lathe.

Steady rest for Atlas 6 inch lathe.

  • Fort Myers, Florida, United States
  • Jan 30th
T nut for Atlas Craftsman 10" & 12" lathes. Tapped for 9/16-18 thread.

T nut for Atlas Craftsman 10" & 12" lathes. Tapped for 9/16-18 thread.

  • Vernon, Alabama, United States
  • Jan 30th
Iscar Swiss Cutoff/Grooving Tool Holder

Iscar Swiss Cutoff/Grooving Tool Holder

  • Fort Wayne, Indiana, United States
  • Jan 30th
DUMORE TOOL POST GRINDER SPINDLE & MISC PARTS

DUMORE TOOL POST GRINDER SPINDLE & MISC PARTS

  • Ellington, New York, United States
  • Jan 30th
NICE! DUMORE DIAMOND DRESSING ATTACHMENT FOR A TOOL POST GRINDER

NICE! DUMORE DIAMOND DRESSING ATTACHMENT FOR A TOOL POST GRINDER

  • Ellington, New York, United States
  • Jan 30th
1/2" INDEXABLE CARBIDE TOOL HOLDER SET LEFT,STRAIGHT,RIGHT NICE

1/2" INDEXABLE CARBIDE TOOL HOLDER SET LEFT,STRAIGHT,RIGHT NICE

  • Wappingers Falls, New York, United States
  • Jan 30th
SOUTH BEND LATHE 9" MODEL B and C BANJO,BEARING and gear stud

SOUTH BEND LATHE 9" MODEL B and C BANJO,BEARING and gear stud

  • Wappingers Falls, New York, United States
  • Jan 30th
SHOP MADE LATHE MANDRELS

SHOP MADE LATHE MANDRELS

  • Wappingers Falls, New York, United States
  • Jan 30th
Logan lathe 10" counter shaft cover mounts

Logan lathe 10" counter shaft cover mounts

  • Wappingers Falls, New York, United States
  • Jan 30th
LOT of TWO - 2 MORSE TAPER LATHE CENTERS engine dead metal holder tool mt

LOT of TWO - 2 MORSE TAPER LATHE CENTERS engine dead metal holder tool mt

  • Milroy, Indiana, United States
  • Jan 30th
LOT of TWO - 3 MORSE TAPER LATHE CENTERS engine dead metal holder tool mt

LOT of TWO - 3 MORSE TAPER LATHE CENTERS engine dead metal holder tool mt

  • Milroy, Indiana, United States
  • Jan 30th
LOT of TWO - 4 MORSE TAPER LATHE CENTERS engine dead metal holder tool mt

LOT of TWO - 4 MORSE TAPER LATHE CENTERS engine dead metal holder tool mt

  • Milroy, Indiana, United States
  • Jan 30th
HEAVY DUTY 11" T-SLOT FACE PLATE W D1-3 CAMLOCK MOUNT

HEAVY DUTY 11" T-SLOT FACE PLATE W D1-3 CAMLOCK MOUNT

  • Ellington, New York, United States
  • Jan 30th
ATLAS CRAFTSMAN COMMERCIAL 12 " lathe COVER GUARD BRACKET 3986

ATLAS CRAFTSMAN COMMERCIAL 12 " lathe COVER GUARD BRACKET 3986

  • Williamston, Michigan, United States
  • Jan 30th
4 1/2 MORSE TAPER SPINDLE NOSE COLLET ADAPTER lathe tool holder adapter

4 1/2 MORSE TAPER SPINDLE NOSE COLLET ADAPTER lathe tool holder adapter

  • Milroy, Indiana, United States
  • Jan 30th
HEAVY DUTY 7-1/2" DOG DRIVING FACE PLATE W/ 3-1/2" 5 THREADED MOUNT

HEAVY DUTY 7-1/2" DOG DRIVING FACE PLATE W/ 3-1/2" 5 THREADED MOUNT

  • Ellington, New York, United States
  • Jan 30th
LOGAN LATHE GEAR COVER 13H X 8W TOP TO9 1/2 BOTTOM 3 IN ID

LOGAN LATHE GEAR COVER 13H X 8W TOP TO9 1/2 BOTTOM 3 IN ID

  • Plantsville, Connecticut, United States
  • Jan 30th
New Sumitomo 40mm 1.6" Indexable Carbide Insert Lathe Tool Holder BNR16-12

New Sumitomo 40mm 1.6" Indexable Carbide Insert Lathe Tool Holder BNR16-12

  • San Tan Valley, Arizona, United States
  • Jan 30th
Atlas metal lathe change gears, used, for 10 and 12 inch ,9-101-44A

Atlas metal lathe change gears, used, for 10 and 12 inch ,9-101-44A

  • Williamston, Michigan, United States
  • Jan 30th

People who viewed this item also vieved

Bridgeport Mill X axis Power Feed

Bridgeport Mill X axis Power Feed

  • Romeo, Michigan, United States
  • May 12th
#FTV840-1800 CINCINNATI MILACRON CNC Vertical Machining Center (New 2002)

#FTV840-1800 CINCINNATI MILACRON CNC Vertical Machining Center (New 2002)

  • Hauppauge, New York, United States
  • May 13th
INGERSOLL END MILL TOOL HOLDER, ING 3240409, YD2500075C8R01

INGERSOLL END MILL TOOL HOLDER, ING 3240409, YD2500075C8R01

  • Anniston, Alabama, United States
  • May 13th
ANTIQUE LOT 260 LETTERS/NUMBERS 3.1cm BRASS SET PANTOGRAPH ENGRAVING MACHINE

ANTIQUE LOT 260 LETTERS/NUMBERS 3.1cm BRASS SET PANTOGRAPH ENGRAVING MACHINE

  • Setubal, Setubal, Portugal
  • May 25th
ANTIQUE LOT 50 LETTER 3.1cm BRASS SET PANTOGRAPH ENGRAVING MACHINE

ANTIQUE LOT 50 LETTER 3.1cm BRASS SET PANTOGRAPH ENGRAVING MACHINE

  • Setubal, Setubal, Portugal
  • May 25th
Snappy SM-3 Adjustable Hole Cutter Tool

Snappy SM-3 Adjustable Hole Cutter Tool

  • Des Moines, Iowa, United States
  • May 25th
12" Soild Contact Wheel for 2x72 Belt Sander Grinder

12" Soild Contact Wheel for 2x72 Belt Sander Grinder

  • Dayton, Ohio, United States
  • May 25th
6" Solid Contact Wheel for 2x72 Belt Sander Grinder

6" Solid Contact Wheel for 2x72 Belt Sander Grinder

  • Dayton, Ohio, United States
  • May 25th
Ammco Brake Shoe Grinder Abrasive, Fits 8000 series units, Aluminum Oxide 340D

Ammco Brake Shoe Grinder Abrasive, Fits 8000 series units, Aluminum Oxide 340D

  • Walnut Creek, California, United States
  • May 25th
Lot of 14 Tap Thread Cutter Machinist Tools Greenfield NTD Dormer

Lot of 14 Tap Thread Cutter Machinist Tools Greenfield NTD Dormer

  • Stuart, Oklahoma, United States
  • May 26th
SRD 1/4 Hp Drill Sharpener Grinder Benchtop Model With Spare Wheels Stones

SRD 1/4 Hp Drill Sharpener Grinder Benchtop Model With Spare Wheels Stones

  • Millstadt, Illinois, United States
  • May 26th
collis #3 morse taper 1/4 np pipe tap driver holder drill press machanist taping

collis #3 morse taper 1/4 np pipe tap driver holder drill press machanist taping

  • Granger, Indiana, United States
  • May 26th
Niagara 68-E 130 Ton Straight Side Double Crank Stamping Punch Press

Niagara 68-E 130 Ton Straight Side Double Crank Stamping Punch Press

  • Stone Mountain, Georgia, United States
  • May 28th
Milford Rivet & Machine Co Model # 250 Rivet Machine Tooled for D5S9X14 s/n 303

Milford Rivet & Machine Co Model # 250 Rivet Machine Tooled for D5S9X14 s/n 303

  • Ambler, Pennsylvania, United States
  • May 28th
Pistorius Machine Company SC-14-PLH Precision Chop Saw S/N 81933

Pistorius Machine Company SC-14-PLH Precision Chop Saw S/N 81933

  • Ambler, Pennsylvania, United States
  • May 28th
HSS Screw Slotting Saw, 1 3/4 Inch Diameter, 0.036 Inch Thick, 5/8 Inch Hole, 90

HSS Screw Slotting Saw, 1 3/4 Inch Diameter, 0.036 Inch Thick, 5/8 Inch Hole, 90

  • Milwaukee, Wisconsin, United States
  • May 28th
HSS Screw Slotting Saw, 1 3/4 Inch Diameter, 0.013 Inch Thick, 1/2 Inch Hole, 90

HSS Screw Slotting Saw, 1 3/4 Inch Diameter, 0.013 Inch Thick, 1/2 Inch Hole, 90

  • Milwaukee, Wisconsin, United States
  • May 28th
• HSS Screw Slotting Saw, 1 3/4 Inch Diameter, 0.010 Inch Thick, 5/8 Inch Hole,

• HSS Screw Slotting Saw, 1 3/4 Inch Diameter, 0.010 Inch Thick, 5/8 Inch Hole,

  • Milwaukee, Wisconsin, United States
  • May 28th
Chmer CM 323Z CNC Sinker EDM

Chmer CM 323Z CNC Sinker EDM

  • Osseo, Minnesota, United States
  • May 29th
MITSUBISHI CX (AF3) WIRE EDM CUTTER UNIT X058D186G51 WM502 NEW!

MITSUBISHI CX (AF3) WIRE EDM CUTTER UNIT X058D186G51 WM502 NEW!

  • Broadview Heights, Ohio, United States
  • May 29th
Charmilles large motor BBC YASKAWA

Charmilles large motor BBC YASKAWA

  • Anoka, Minnesota, United States
  • May 29th
3 pack DEBURRING REPLACEMENT BLADES , E100 HSS

3 pack DEBURRING REPLACEMENT BLADES , E100 HSS

  • Corona, California, United States
  • May 30th
ROSS HIGH SHEAR ROTOR STATOR MIXER (29078)

ROSS HIGH SHEAR ROTOR STATOR MIXER (29078)

  • Cincinnati, Ohio, United States
  • May 30th
HEAVY DUTY MEDIUM GRIT 4"(100MM) VALVE GRINDER STONE FOR SIOUX BRAND NEW

HEAVY DUTY MEDIUM GRIT 4"(100MM) VALVE GRINDER STONE FOR SIOUX BRAND NEW

  • DELHI, DELHI, India
  • May 30th
NEW USA 5/16-24 Geometric chasers for 3/4 Head

NEW USA 5/16-24 Geometric chasers for 3/4 Head

  • Leland, Illinois, United States
  • Jun 2nd
NEW USA 3/8-24 Geometric chasers for 3/4 Head

NEW USA 3/8-24 Geometric chasers for 3/4 Head

  • Leland, Illinois, United States
  • Jun 2nd
4.4 LB LOT OF DIE HEAD THREADER CHASERS

4.4 LB LOT OF DIE HEAD THREADER CHASERS

  • Los Angeles, California, United States
  • Jun 2nd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies