+ Post new Ad
Slitting & Slotting Saw Arbor 3pc Set for 1/4, 3/8 & 1/2 Holes all 1/2" Shanks, US $94.25 – Picture 0
Slitting & Slotting Saw Arbor 3pc Set for 1/4, 3/8 & 1/2 Holes all 1/2" Shanks, US $94.25 – Picture 0

Slitting & Slotting Saw Arbor 3pc Set For 1/4, 3/8 & 1/2 Holes All 1/2" Shanks

US $94.25

  • Seminole, Florida, United States
  • Jan 30th
Open on mobile:
QR code
This is for a Set of 3 Arbors Slitting & Slotting Saw Arbors For 1/4, 3/8 & 1/2 Holes all 1/2" Shanks .002" TiR Precision Ground With Wood Block each arbor has a Spare Screw & Hex Wrench We accept PayPal for payment. We will ship within 24  hours of cleared payment Monday through Friday, excluding Holidays. Most of our items in our store will calculate and combine  with the correct shipping rates in the US.  For our overseas account please  request combine shipping before you pay as we will give you the best rate  possible. To qualify for a hassle-free return, you must pay with  PayPal and have the item shipped to a US address. The item must be returned in  the same condition it was received. You can contact us here if you have any questions regarding this item.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Country/Region of Manufacture Poland
MPN 3-123-050
Brand Toolmex

Directions

Similar products from Tools for Saws & Cutting Machines

MARVEL Fully Automatic Vertical Bandsaw - Used - AM13610

MARVEL Fully Automatic Vertical Bandsaw - Used - AM13610

  • Cleveland, Ohio, United States
  • Jan 30th
9” x 12” Doall Automatic Horizontal Band Saw, Model 912A, Bundling

9” x 12” Doall Automatic Horizontal Band Saw, Model 912A, Bundling

  • Somerville, New Jersey, United States
  • Jan 30th
VERY NICE SEAL TECH 40" BANDSAW MODEL 4848 51" X 84" TABLE SINGLE PHASE 115 VOLT

VERY NICE SEAL TECH 40" BANDSAW MODEL 4848 51" X 84" TABLE SINGLE PHASE 115 VOLT

  • Rochester, New York, United States
  • Jan 30th
DeWALT MITER-SAW STOP

DeWALT MITER-SAW STOP

  • West Point, Pennsylvania, United States
  • Jan 30th
WELLS HORIZONTAL BANDSAW MDL 58B 7" X 9" 115V SINGLE PHASE

WELLS HORIZONTAL BANDSAW MDL 58B 7" X 9" 115V SINGLE PHASE

  • Wadley, Alabama, United States
  • Jan 30th
NEW ELLIS MODEL 3000 MITRE BANDSAW / BAND SAW - 13 1/2 ” Round at 90°

NEW ELLIS MODEL 3000 MITRE BANDSAW / BAND SAW - 13 1/2 ” Round at 90°

  • Grand Rapids, Michigan, United States
  • Jan 30th
GROB 4 V METAL CUTTING VERTICAL BAND SAW /W BLADE WELDER BAND SAW BLADES

GROB 4 V METAL CUTTING VERTICAL BAND SAW /W BLADE WELDER BAND SAW BLADES

  • Hopkins, Minnesota, United States
  • Jan 30th
KM14 14?Abrasive Mitre Saw KALAMAZOO 5hp 3 phase KI14SS 14 inch Miter Saw

KM14 14?Abrasive Mitre Saw KALAMAZOO 5hp 3 phase KI14SS 14 inch Miter Saw

  • Gobles, Michigan, United States
  • Jan 30th
1994 BRIDGEPORT INTERACT MK2 CNC VERTICAL MILL

1994 BRIDGEPORT INTERACT MK2 CNC VERTICAL MILL

  • Pinellas Park, Florida, United States
  • Jan 30th
Metal Band Saw, Wet, xtra gear box

Metal Band Saw, Wet, xtra gear box

  • New Point, Indiana, United States
  • Jan 30th
Nice Heavy Duty Horizontal Band Saw Amada HA250 HA-250 10" x 10"

Nice Heavy Duty Horizontal Band Saw Amada HA250 HA-250 10" x 10"

  • Baldwin Park, California, United States
  • Jan 30th
1998 Amada H1080 Saw

1998 Amada H1080 Saw

  • Shawano, Wisconsin, United States
  • Jan 30th
ENCO MODEL: 01712009 VERTICAL BANDSAW

ENCO MODEL: 01712009 VERTICAL BANDSAW

  • Oceanside, California, United States
  • Jan 30th
14" Doringer Model D- 350H Cold Semi Automatic Cold Saw, S/N 21304

14" Doringer Model D- 350H Cold Semi Automatic Cold Saw, S/N 21304

  • United States
  • Jan 30th
FREE LED + 2 Arbor Shop Press Plate X-BARS + 2 LONG Bed Bars 4 PC Set 20 TONTon

FREE LED + 2 Arbor Shop Press Plate X-BARS + 2 LONG Bed Bars 4 PC Set 20 TONTon

  • Victor, New York, United States
  • Jan 30th
Bandsaw Doall 16" Metalmaster Vertical Metal Cutting Mod. V-16 ,Rare Find 115V !

Bandsaw Doall 16" Metalmaster Vertical Metal Cutting Mod. V-16 ,Rare Find 115V !

  • Providence, Rhode Island, United States
  • Jan 30th
Vertical Band Saw, Craftsman

Vertical Band Saw, Craftsman

  • Woonsocket, Rhode Island, United States
  • Jan 30th
9 x 49 BRIDGEPORT VERTICAL MILL 1 HP,DRO,CROME WAYS, POWER FEED, VISE,COLLETS

9 x 49 BRIDGEPORT VERTICAL MILL 1 HP,DRO,CROME WAYS, POWER FEED, VISE,COLLETS

  • Pinellas Park, Florida, United States
  • Jan 30th
BEAUTIFUL GROB 4V-36" VERTICAL BAND SAW YEAR BUILT 1999 WITH NEW TIRES

BEAUTIFUL GROB 4V-36" VERTICAL BAND SAW YEAR BUILT 1999 WITH NEW TIRES

  • Seekonk, Massachusetts, United States
  • Jan 30th
Marvel Saw Series 15A

Marvel Saw Series 15A

  • San Diego, California, United States
  • Jan 30th

People who viewed this item also vieved

BRASS EDM WIRE (1) ONE 44# SPOOL .012" 30 mm HARD MITSUBISHI SODICK FANUC P-15

BRASS EDM WIRE (1) ONE 44# SPOOL .012" 30 mm HARD MITSUBISHI SODICK FANUC P-15

  • Broadview Heights, Ohio, United States
  • Jun 3rd
"Flat Blank" Holder for erowa ITS system - new - Brass

"Flat Blank" Holder for erowa ITS system - new - Brass

  • Warren, Michigan, United States
  • Jun 3rd
MITSUBISHI UPPER wire feed DC MOTOR S601D899P01 16CL-2501G 24.50.502 WM424 NEW!

MITSUBISHI UPPER wire feed DC MOTOR S601D899P01 16CL-2501G 24.50.502 WM424 NEW!

  • Broadview Heights, Ohio, United States
  • Jun 3rd
South Bend Metal Lathe Follower Rest for 13" Lathe Telescoping

South Bend Metal Lathe Follower Rest for 13" Lathe Telescoping

  • Roselle, Illinois, United States
  • Jun 4th
Machinist Lathe Tool The Holdridge Radii-Cutter, Model 4-S Radius Ball Cutter

Machinist Lathe Tool The Holdridge Radii-Cutter, Model 4-S Radius Ball Cutter

  • Roselle, Illinois, United States
  • Jun 4th
Best Quality Product 6 Wheel Lathe Knurling Tool Holder - Milling Rolling Lathes

Best Quality Product 6 Wheel Lathe Knurling Tool Holder - Milling Rolling Lathes

  • New Delhi, India
  • Jun 4th
ATLAS MILLING MACHINE MF-17A LEADSCREW FEED GEAR FINE USED CONDITION

ATLAS MILLING MACHINE MF-17A LEADSCREW FEED GEAR FINE USED CONDITION

  • Niles, Michigan, United States
  • Jun 4th
Hardinge Metal Lathe Steady Rest Split Bed More Looks Unused

Hardinge Metal Lathe Steady Rest Split Bed More Looks Unused

  • Millstadt, Illinois, United States
  • Jun 4th
NICHOLS...THE MILLERS THAT USE THEIR HEADS bulletin 68 #RR540 Milling Machine

NICHOLS...THE MILLERS THAT USE THEIR HEADS bulletin 68 #RR540 Milling Machine

  • Perth, Ontario, Canada
  • Jun 4th
NEW NiB ABANAKI SMD12 oil Skimmer Disc type 12" dia 7 RPM 115VAC dayton 3EJF5

NEW NiB ABANAKI SMD12 oil Skimmer Disc type 12" dia 7 RPM 115VAC dayton 3EJF5

  • Mentor, Ohio, United States
  • Jun 5th
New Holland Centrifugal Chip Dryer, Model K-24, 3 Baskets

New Holland Centrifugal Chip Dryer, Model K-24, 3 Baskets

  • Somerville, New Jersey, United States
  • Jun 5th
Safety Hoist Company 20 feet Platform Hoist HD-400 Briggs 3.5hp Gas $699. obo

Safety Hoist Company 20 feet Platform Hoist HD-400 Briggs 3.5hp Gas $699. obo

  • Hollywood, Florida, United States
  • Jun 5th
CINCINNATI #2 GRINDER WORK WREST (BLADE HOLDER) THRU FEED / IN FEED / END FEED

CINCINNATI #2 GRINDER WORK WREST (BLADE HOLDER) THRU FEED / IN FEED / END FEED

  • North Olmsted, Ohio, United States
  • Jun 6th
Grinding Wheel Dresser with base Same as J&S

Grinding Wheel Dresser with base Same as J&S

  • Lakeville, Massachusetts, United States
  • Jun 6th
BROWN & SHARPE Magnetic Chuck 6" X 18"

BROWN & SHARPE Magnetic Chuck 6" X 18"

  • Oregon, Ohio, United States
  • Jun 6th
Ingersoll 1.5" Drill 1" Shank w/4 Inserts 12J1Q 1501780R01 (LOC1364B)

Ingersoll 1.5" Drill 1" Shank w/4 Inserts 12J1Q 1501780R01 (LOC1364B)

  • Laingsburg, Michigan, United States
  • Jun 7th
Kia V-50D CNC Drill/Tap VMC w/ Auto Pallet Changer, Fanuc, 10,000 RPM, 27"x 20"

Kia V-50D CNC Drill/Tap VMC w/ Auto Pallet Changer, Fanuc, 10,000 RPM, 27"x 20"

  • Elk Grove Village, Illinois, United States
  • Jun 7th
Ingersoll 1.5" Drill 1" Shank 12J1E 15015S1R10 (LOC1365A)

Ingersoll 1.5" Drill 1" Shank 12J1E 15015S1R10 (LOC1365A)

  • Laingsburg, Michigan, United States
  • Jun 7th
CARBIDE TIPPED VALVE SEAT CUTTERS 41MM, 30 DEGREE VINTAGE & MODERN CAR & BIKES

CARBIDE TIPPED VALVE SEAT CUTTERS 41MM, 30 DEGREE VINTAGE & MODERN CAR & BIKES

  • DELHI, DELHI, India
  • Jun 8th
CARBIDE TIPPED VALVE SEAT CUTTERS 49MM, 30 DEGREE VINTAGE & MODERN CAR & BIKES

CARBIDE TIPPED VALVE SEAT CUTTERS 49MM, 30 DEGREE VINTAGE & MODERN CAR & BIKES

  • DELHI, DELHI, India
  • Jun 8th
Shaviv PLUM-BURR Metal Heavy Duty 155-90082 for 1/4" - 1-5/8" Tubing 3PBM-1

Shaviv PLUM-BURR Metal Heavy Duty 155-90082 for 1/4" - 1-5/8" Tubing 3PBM-1

  • Joliet, Illinois, United States
  • Jun 8th
DIE SHOE 20"X10"

DIE SHOE 20"X10"

  • Gardena, California, United States
  • Jun 8th
Manual Mounting Mini Universal Bending Bender Forms Wire, Flat Metal and Tubing

Manual Mounting Mini Universal Bending Bender Forms Wire, Flat Metal and Tubing

  • Toledo, Ohio, United States
  • Jun 8th
BENZ S4 SOLIDFIX ER32 COLLET CHUCK ADAPTOR (4 pieces)

BENZ S4 SOLIDFIX ER32 COLLET CHUCK ADAPTOR (4 pieces)

  • Waxhaw, North Carolina, United States
  • Jun 8th
Geometric 1/2 DSA 3/8-16 Chasers

Geometric 1/2 DSA 3/8-16 Chasers

  • Las Vegas, Nevada, United States
  • Jun 9th
Geometric 5/16 D 4.0 MM Chasers

Geometric 5/16 D 4.0 MM Chasers

  • Las Vegas, Nevada, United States
  • Jun 9th
Geometric Greenfield 9/16 K 5/16-18 NF Chasers

Geometric Greenfield 9/16 K 5/16-18 NF Chasers

  • Las Vegas, Nevada, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies