Hi, up for sale is 1 set of standard sized, aluminum, "2 hole" pins. One pin has a level vial for easy vertical leveling, and comes with a 360° vial that just "snaps" in for easy replacement. These are also spot faced 15/16" I.D.
Hi, up for sale is 5 sets of small, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 2" long, with knurled nuts.
Hi, up for sale is 5 sets of small, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 2" long, with knurled nuts.
Hi, up for sale is 5 sets of Mini, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16" , and are very light weight, but strong. These have a 45 degree taper with 1/4"-20 removable threads, 2" long, with knurled nuts.
Now with Knurled nuts! Hi, up for sale is one lot of 5 sets of 1-1/8 inch O.D., aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16", and are very light weight, but strong.
Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These will fit small holed flanges, like Duct work Etc., and pipe up to 12" on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16" , and are very light weight, but strong.
Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. Even 1/2" pipe has 5/8" holes, so these will fit 1/2" pipe up to 12" pipe on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong.
Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes fro1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.
Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and knurled nuts.
Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.
This a Nice MILLER MAXSTAR 150 STL It has Lots Of Extras as Pictured along With Control Peddle ,INTRUCTION BOOK ,CARRING CASE , GAUGES, HOSES, other than some scratches and dings the only thing I could Find was The Socket That The Peddle plugs into has a chip in the plastic but it still locks down tight It has Been Fully Tested To Work I have Loaded 12 Pictures To Show Condition and What You are Getting If You have any Questions Please ask I have a lot Listed and so Check out my other items!
BRAND NEW FOOT PEDAL MANUFACTURED TO SUIT VARIOUS LINCOLN TIG WELDING MACHINES THE FOOT PEDAL HAS A VERY ROBUST CONSTRUCTION TO WITHSTAND THE MOST HARSH ENVIROMENTS WITH A VERY SMOOTH ACTION. THE FOOT PEDAL ENABLES THE OPERATOR TO CONTROL THE WELDING CURRENT WHILST WELDING, LEAVING BOTH HANDS FREE TO HOLD THE TIG TORCH AND ADD FILLER WIRE TO THE WELD. IT IS AN ESSENTIAL BIT OF EQUIPMENT FOR FINE TIG WORK WHERE YOU NEED TO HAVE GOOD CONTROL OF THE WELDING AMPERAGE.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.