The 24-6040-0027 is a Solder Wire, Sn60+Pb40 Alloy. Rosin 44® is a high activity RA core flux designed for excellent instant wetting action, even on Nickel surfaces. Although 44® is a RA-based material, the residues are non-corrosive if not cleaned.
The product has a good solderability, insulation resistance, no spattering, and non-corrosive features. It also has a melting point of 365F-374F/185C-190C and certification from CE. The package content has 1 x 60/40 0.5mm Rosin Core Solder Wire.
4 Vintage Solder Bars - 1 Ryerson Guranteed 50% Lead + 3 Bell System Seam D Please see the pics as these are used with wear and staining. The Ryerson weighs 1 pound and 4 ounces. The Bell System bars weigh 7 ounces, 7 ounces, and 6 ounces.
MG Chemicals 8330S-200ML Silver Epoxy, Extreme Conductivity, 4 hours Working Time, 24 oz., Pair of 2 Cans Product Features Excellent 0.0007 ohm·cm electrical resistivity and 1.75 W/(m·K) thermal conductivity Easy 1:1 mix ratio and long working time - may be mixed once and then used as a 1-part epoxy for a four hour production shift Optimal cure temperature of only 65 °C - lower than most 1-part epoxie
This offer is for brand new , .062 (1/16") diameter solid core solder that is an american made product. This solder is good for copper tubing, plumbing and crafts. When using a smaller diameter like this, it is so much easier to apply to those small projects and to get into the small plumbing joints.
The 95/5 Lead Free Solder weighing 3 pounds and coupled with the Bridget, Charolett and Oatey paste is the ultimate combination for professionals in the industry. The solder and paste are rich in keywords that will ensure optimal performance. The entire weight of the solder pieces is 3 lbs, and it comes with a flux/paste for maximum efficiency.