solder pot for sale, brand-new and used.

Lustersheen 8 Pad Pack Bronze Wool Grades (Fine, Medium, Coarse )

Lustersheen 8 Pad Pack Bronze Wool Grades (Fine, Medium, Coarse )

Lustersheen 8 Pad Pack Bronze Wool Grades (Fine, Medium, Coarse )

Adjustable constant current (ACC) driver 20- 500mA output current range (adjusted by pot on the board) 5-10V input TTL control (if requ

You are purchasing 2 units of the adjustablet current power driver for laser diodes. Adjustable constant current (ACC) driver 20- 300mA output current range (adjusted by pot on the board) 5-10V input

Plato Precision Digital Solder Pot SP-600T Crucible 4"W x 6"L x 4" D , 115 vac , 1000 watts

This is a very nice condition selective solder that has been well maintained and is just now being taken out of production.   Unit comes with (1) leaded and (1) lead free pot( interchangeable).  It will be skidded and banded/ prepped for truck shipment.

Esico Solder Pot, Model 80T LF, 1200 Watts, 230VAC Very minimal use with SN100C Lead Free Solder, very good condition. Apx 12"x 6"x 2" FOB, Edina, MN

UNIT OFFERED - IS LEAD FREE CAPABLE, SINGLE POT CONFIGURATION - WITH TWO POINT SOLDERING NOZZLE IN POT, SET-UP TO ACCOMODATE INSTALL OF SECOND POT, WITH I/R PREHEAT, SPRAY FLUXER. The buyer is responsible for all skidding, packup and shipment costs ExWorks RECON Dock.

HTS-2000 Second Generation Fluxless Welding/Brazing Rod You will received: 55 - 9" aluminum repair rods. Used with nothing more than a heat source, such as propane or ox-acetylene! Through recent advancements in metallurgy, HTS-2000 is found to be the easiest, fastest, and strongest brazing rod ever to be developed!

INTERNATIONAL LISTING: THE US POST OFFICE INCREASED INTERNATIONAL POSTAGE RATES ALMOST 100% ON JANUARY 27 2013, THE RATES ARE MUCH CHEAPER FOR LESS THAN 1/4 POUND, SO I AM OFFERING as close to 90 GRAMS as I can get. about 3.20 ounces. YOUR CHOICE of rods Seller is a PhD Chemical Engineer/Inventor BE CAREFUL - OTHERS ARE SELLING POOR COUNTERFEIT RODS Aluminum REPAIRS, ALUMALOY, DURAFIX, HTS 2000, ALADDIN ARE BASICALLY THE SAME!

Commercial model, Ball Screws and 25mm Rail & Carriages on all axis. Special Pricing reg $4995.00 This is a 24"x 49" x 4" CNC. It's milled from single sheet of 6061 aluminum, not forged pot metal and ground to fit then covered with tin.

Commercial model, Ball Screws and 25mm Rail & Carriages on all axis. Special Pricing reg $4595.00 This is a 24"x 24" x 4" CNC. It's milled from single sheet of 6061 aluminum, not forged pot metal and ground to fit then covered with tin.

start_elivehelp_btncode end_elivehelp_btncode Check out my other items! This product is fabricated from pure stainless steel. The design incorporates an independ