speed chucks for sale, brand-new and used.

3 Pcs. Techniks Brand New CAT 40 ER 16 x 2.76" 25K RMP @ G2.5 Balanced High Speed Collet Chucks (with hex nut) for CNC Mill w/ ER 16-A Hex Collet Chuck Wrench Techniks Collet Chuck Advantages Balanced to 25,000 RPM at G2.5 T.I.R. 0.0001" or better from taper to collet pocket Taper ground to AT3 accuracy or better Each holder lab certified for accuracy and balance Includes Power Coat Nut CAT 40, ER 16 Collet Chucks

1 Pc. Techniks Brand New CAT 40 ER 16 x 2.76" 25K RMP @ G2.5 Balanced High Speed Collet Chuck (with hex nut) for CNC Mill w/ 10 Pcs. ER 16 3/32" to 3/8" x 32nds Steel Sealed Coolant Collet Set & ER 16-A Hex Collet Chuck Wrench Kit Includes: 1 Pc.

1 Pc. Techniks Brand New CAT 40 ER 16 x 2.76" 25K RMP @ G2.5 Balanced High Speed Collet Chuck (with hex nut) for CNC Mill w/ 10 Pcs. ER 16 3/32" to 3/8" x 32nds Collet Set & ER 16-A Hex Collet Chuck Wrench Kit Includes: 1 Pc.

1 Pc. Techniks Brand New CAT 40 ER 16 x 2.76" 25K RMP @ G2.5 Balanced High Speed Collet Chuck (with hex nut) for CNC Mill w/ ER 16-A Hex Collet Chuck Wrench Techniks Collet Chuck Advantages Balanced to 25,000 RPM at G2.5 T.I.R. 0.0001" or better from taper to collet pocket Taper ground to AT3 accuracy or better Each holder lab certified for accuracy and balance Includes Power Coat Nut CAT 40, ER 16 Collet Chucks

3 Pcs. Techniks Brand New CAT 40 ER 16 x 2.76" 25K RMP @ G2.5 Balanced High Speed Collet Chucks (with hex nut) for CNC Mill w/ 10 Pcs. ER 16 3/32" to 3/8" x 32nds Collet Set & ER 16-A Hex Collet Chuck Wrench Kit Includes: 3 Pcs.

3 Pcs. Techniks Brand New CAT 40 ER 16 x 2.76" 25K RMP @ G2.5 Balanced High Speed Collet Chucks (with hex nut) for CNC Mill w/ 10 Pcs. ER 16 3/32" to 3/8" x 32nds Precision Steel Sealed Coolant Collet Set & ER 16-A Hex Collet Chuck Wrench Kit Includes: 3 Pcs.

1 Pc. Techniks Brand New CAT 40 ER 16 x 4.00" 25K RMP @ G2.5 Balanced High Speed Collet Chuck (with hex nut) for CNC Mill Techniks Collet Chuck Advantages Balanced to 25,000 RPM at G2.5 T.I.R. 0.0001" or better from taper to collet pocket Taper ground to AT3 accuracy or better Each holder lab certified for accuracy and balance Includes Power Coat Nut CAT 40, ER 16 Collet Chucks

6 Pcs. Techniks Brand New CAT 40 ER 16 x 2.76" 25K RMP @ G2.5 Balanced High Speed Collet Chucks (with hex nut) for CNC Mill w/ 10 Pcs. ER 16 3/32" to 3/8" x 32nds Precision Steel Sealed Coolant Collet Set & ER 16-A Hex Collet Chuck Wrench Kit Includes: 6 Pcs.

6 Pcs. Techniks Brand New CAT 40 ER 16 x 2.76" 25K RMP @ G2.5 Balanced High Speed Collet Chucks (with hex nut) for CNC Mill w/ 10 Pcs. ER 16 3/32" to 3/8" x 32nds Collet Set & ER 16-A Hex Collet Chuck Wrench Kit Includes: 6 Pcs.

6 Pcs. Techniks Brand New CAT 40 ER 16 x 2.76" 25K RMP @ G2.5 Balanced High Speed Collet Chucks (with hex nut) for CNC Mill w/ ER 16-A Hex Collet Chuck Wrench Techniks Collet Chuck Advantages Balanced to 25,000 RPM at G2.5 T.I.R. 0.0001" or better from taper to collet pocket Taper ground to AT3 accuracy or better Each holder lab certified for accuracy and balance Includes Power Coat Nut CAT 40, ER 16 Collet Chucks

This sale is for Two (2) IRWIN USA 3pc SET of SPEEDBORE MAX SPEED TRI FLUTE BITS in sizes 5/8" 3/4" 1" Item # WL145.3 A rule may appear in the photographs for size reference only and is not part of this sale. Any manufacturing defects are the sole responsibility of the manufacturer.

Warner Swassey #3 Turret Lathe, M1200 model, DRO on turret, Motor is two speed three phase I have a phase converter for 220 single phase wired to slow speed on motor, Turret holds up to #4 MT tooling, 3 & 4 jaw chucks, lots of tool holders for turret more then enough to fill turret and then some, hand clutch,forward reverse. good machine. will need help to load or hire a wrecker to pick it up, one near buy I have hired in past.

Precision Twist C29M40CO Cobalt Steel Short Length Drill Bit Set with Metal Case, Gold Oxide Finish, 135 Degree Split Point, Inch, 29 piece, 1/16" to 1/2" x 64ths

Chicago Latrobe 790 Solid Carbide Spotting Drill Bit, Regular Length, Uncoated (Bright) Finish, Round Shank, Right-Hand Spiral Flute, 120 Degree Conventional Point, 1/4" Size Size: 1/4 in The Chicago-Latrobe 790 series regular length spotting bit is made from solid carbide with an uncoated (bright) finish and has a 120-degree conventional point for drilling a pilot hole for a 118-degree secondary drill bit into hard materials.

One (1) 2004 Mori Seiki ZT-1500Y YOU ARE BIDDING ON DOWN PAYMENT ONLY FOR QUOTE/PRICE ON MACHINE PLEASE CALL JASON 610-849-3081  Ge

Precision Twist C15R10CO Cobalt Steel Jobber Length Drill Bit Set with Metal Case, Gold Oxide Finish, 135 Degree Split Point, Inch, 15 piece, 1/16" to 1/2" x 32nds

(2 ea.) (4 Total Bits) 2-pack Irwin 3054002 #3 Phillips/#10-12 Slotted Double-ended Driver Bit, 1-1/2" You will receive 2 of the above pictured items Features: Delivers speed and convenience Durable one-piece design

1 Pc. Techniks Brand New CAT 40 ER 16 x 2.76" 25K RMP @ G2.5 Balanced High Speed Collet Chuck (with hex nut) for CNC Mill Techniks Collet Chuck Advantages Balanced to 25,000 RPM at G2.5 T.I.R. 0.0001" or better from taper to collet pocket Taper ground to AT3 accuracy or better Each holder lab certified for accuracy and balance Includes Power Coat Nut CAT 40, ER 16 Collet Chucks

I have Thousands of Manuals for Metal Working, Wood Working and Fabrication Machining. Please just ask if you are looking for a hard to find Manual. It would be a pleasure to get your Machine Up and Running Again through this Invaluable Information.