spindle oil for sale, brand-new and used.

SquareTrade © AP6.0

This is a CNC milling machine that I converted to CNC, and has only cut a few test pieces to gauge its abilities and its tuning. The manual machine was a PM30-LV which is a BF30 variant, with great travels and about twice the size/weight of a G0704 /bf20 variant.

Model: MBB-1690D S/N 3J1-89107 Yr. 1988

For Sale is a: "LNS HYDROBAR" BAR FEED Bar Feed has had moderate use, but is still in great working condition. PURCHASED WITH MACHINE TOOL BUT DID NOT USE BAR LOADER DUE TO THIS PARTICULAR MODEL NOT MATCHING OUR STANDARDIZED PROCESSES Type: Tube Model: 3.16 HS – 4.8 Serial Number: 41695 Year of Ma

Item#3888 Sunnen Precision Honing Machine Equipped With: Machine Specifications: I.D. RANGE 0.060” to 6.500” (1.50 to 165mm) LENGTH RANGE UP TO 16” (400mm) DEPENDING ON DIAMETER SPINDLE SPEEDS (12) 200 to 2500 RPM HONING

#7 Heald Redhead Grinding Spindle Model #: 407-253200

#1 Heald Redhead Grinding Spindle Model #: 401-253200-4

BRYANT SPINDLE Bryant Grinder Div./ExCello Corp. WH. HD.

Alpine Bullet Bar Feeder Alpine B00040R2A Serial No. 201990031 Condition: Excellent Alpine Bullet Bar, Shortest Bar Feed in Industry, Smallest Foot Print, Auto Bar Length Detection, Reduces waste with fewer remnants, Specification Description Bar Capacity .25" to 2.5" Max. Length 6' 1.75" Bar Change Time 5 Seconds Oil Capacity 45L/ 15G Dimensions 85" x 26" x 43"H

(one) Spindle oil cooler , chiller , Kanto Seiki , model MLSA-22N , 220/200 vac , 50/60hz , 2.2kw compressor , dual reservoirs and radiators , This unit does not come equipped with a pump. Inlet and outlet are 1" new in 2004 , unused . S/n 01015166 , R407C refrigerant .

Allen 2-Spindle Drill Press S/N Unknown Power feed on both spindles Push button controls oil groove table (1) Drill Chuck #3 Morse Taper Wired 440 volts 3-phase Missing one handle on motor, as shown in photo Aerospace Surplus Dimensions 51 x 52 x 101 in. Approx. weight 2,000 lbs.

-------------------------------------------------------------------------------------------------------------------------------------------------------

-------------------------------------------------------------------------------------------------------------------------------------------------------

HELPING YOU BUY WITH CONFIDENCE 100% POSITIVE FEEDBACK SINCE 1999 ________________________________________________________________________________________________________________________________________

Very Good Condition C.R. ONSRUD 3025 INVERTED PIN ROUTER, 30" Throat capacity, Heavy Duty spindle with oil mist lubrication, 0" - 3" spindle travel, pneumatically controlled by foot pedal, 3-position depth stop, Template mounts on top of workpiece, retractable pin and spindle to eliminate lifting of workpiece, 1/2" self-releasing spindle collet. Includes Delta 1 1/2 HP Single-Stage Dust Collector and Husky Pro 5 HP 26 gallon Belt Compressor.

C.R. ONSRUD 3025 INVERTED PIN ROUTER, 30" Throat capacity, Heavy Duty spindle with oil mist lubrication, 0" - 3" spindle travel, pneumatically controlled by foot pedal, 3-position depth stop, Template mounts on top of workpiece, retractable pin and spindle to eliminate lifting of workpiece, 1/2" self-releasing spindle collet

Industrial model, Ball Screws on all axis and over 100 inches per min travel. This is a 24"x 24" x 4.5" CNC. It's milled from 6061 aluminum, 20 mm rods, two precision forged double bearing blocks, and an oil flush connector on each axis.

CO Porter overarm router, model 622 with sliding head. 5 + inch travel, oil mist lubrication, foot control pedal. table also has 6+ inch travel, so max distance of chuck to table is 12 inch, 24 inch deep throat.