Spirent Tech-X Plus xDSL Copper / IP / ADSL2 Field Tester T4200 Tech x RFL, US $995.00 – Picture 0

Spirent Tech-X Plus xDSL Copper / IP / ADSL2 Field Tester T4200 Tech x RFL, US $995.00 – Picture 1

Spirent Tech-X Plus xDSL Copper / IP / ADSL2 Field Tester T4200 Tech x RFL, US $995.00 – Picture 2

Spirent Tech-X Plus xDSL Copper / IP / ADSL2 Field Tester T4200 Tech x RFL, US $995.00 – Picture 3

Spirent Tech-X Plus xDSL Copper / IP / ADSL2 Field Tester T4200 Tech x RFL, US $995.00 – Picture 4

Spirent Tech-X Plus xDSL Copper / IP / ADSL2 Field Tester T4200 Tech x RFL, US $995.00 – Picture 5

Spirent Tech-X Plus xDSL Copper / IP / ADSL2 Field Tester T4200 Tech x RFL, US $995.00 – Picture 6

Spirent Tech-X Plus xDSL Copper / IP / ADSL2 Field Tester T4200 Tech x RFL, US $995.00 – Picture 7

Spirent Tech-X Plus xDSL Copper / IP / ADSL2 Field Tester T4200 Tech x RFL, US $995.00 – Picture 8

Spirent Tech-X Plus xDSL Copper / IP / ADSL2 Field Tester T4200 Tech x RFL, US $995.00 – Picture 9

Spirent Tech-X Plus xDSL Copper / IP / ADSL2 Field Tester T4200 Tech x RFL, US $995.00 – Picture 10

Spirent Tech-X Plus xDSL Copper / IP / ADSL2 Field Tester T4200 Tech x RFL, US $995.00 – Picture 11

Spirent Tech-x Plus Xdsl Copper / Ip / Adsl2 Field Tester T4200 Tech X Rfl

US $995.00

Toledo, Ohio, United States
Jan 29th

Open on mobile:
QR code

Content on this page requires a newer version of Adobe Flash Player. The Following Items Are Included: Spirent Tech-X Plus T4200-5/BS Field Tester (BC# 14281 14292 14293 14297 14298 14300 12785) w/ Options: Copper TDR RFL Wide Band ADSL ADSL2 ADSL2+ 10/100 IP Testing Ethernet Cable AC Adapter/Charger Power Cord USB PC Interface Cable User Manual On CD-ROM Carrying Case w/ Strap BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! This Item Has A Current Calibration! Spirent Tech-X Plus T4200 Copper / 10/100 IP / ADSL2+ Field Tester Installed Options: - Copper - TDR - RFL - Wide Band - ADSL - ADSL2 - ADSL2+ - 10/100 IP Testing Spirent’s Tech-X Plus Field Tester ensures service providers worldwide can install and troubleshoot next-generation broadband xDSL, 10/100 IP & Copper services while increasing service efficiency with automated and integrated fault diagnostics. Includes Carrying Case & Accessories As Listed Above! Working Condition: Excellent Condition: Refurbished Calibrated: Yes Warranty: 90 Day Exchange Warranty Highlights Emulate an ADSL, ADSL 2, and ADSL 2+ modem with upstream/downstream and graphical results Analyse IPTV streams to determine your customer’s Quality of Experience Verify high-speed internet service using Ping, TraceRoute, Web Browser and OAM loopbacks. Find faults with a resistive fault locator (RFL) and a 26kft (8km) time domain reflectometer (TDR) Pre-qualify pairs for xDSL services with spectrum and noise analysis, and insertion loss to 12MHz Quickly see faults or view results on a large graphical display For true end-to-end testing, service providers can use Tech-X Plus to test from the customer’s media gateway to the DSLAM and then on to the ATM/Ethernet backbone; and then to the Internet, voice, or video service provider. Tech-X Plus’ expert copper, DSL, and IP diagnostics eliminate the need for a technician to be expert at new technologies. Tech-X Plus diagnostics automatically indicate the source of the problem and in plain English suggest the next steps. By using one of the numerous connection options with test automation, the field technician quickly gains access to central office support and network resources during installation or troubleshooting. Thorough testing of the end-users’ voice, video, and data service reduces the customer’s wait between the service order initiation and service availability. In addition, if service interruptions occur, the resolution time is drastically reduced. With Tech-X Plus, service providers can confidently increase broadband IP service availability while attracting and retaining satisfied customers. Comprehensive Copper Fault Analysis Using the Multimeter (DVOM) features in Tech-X Plus, technicians easily identify AC and DC faults shown by large screen results and help menus. Tests for voltage, current, capacitance (opens), resistance, and balance identify the presence of these faults. After faults are shown to exist, the Tech-X Plus’ precise, long-range TDR finds the location of those faults with a simple push of a button. In addition, high-resistive faults can be found using the instrument’s unmatched RFL feature. DSL Pre-qualification The Tech-X Plus locates all types of faults. It is equipped with wideband noise and loss tests that provide qualitative testing and impairment diagnosis for pre-qualifying the loop before deployment of xDSL services. Furthermore, wideband Power Spectral Density (PSD) can be used to identify noise disturbers and is shown on a large graphical screen. DSL and IP Service Installation In addition to copper qualification measurements, Tech-X Plus performs complete DSL service testing. Using a combination of modem emulation, DSL expert diagnostics, and various ATM/IP tests such as Ping, TraceRoute and even a Web Browser, Tech-X Plus helps your technicians verify that your customer’s service is working. Plain text and graphical results enable isolation of in-home wiring, local loop faults, noise disturbers, bad or missing DSLAM cards, and mis-configured port configurations. Key Product Features Automated Test Scripts Tech-X Plus provides one-button test scripts tailored to service-specific Methods and Procedures (M&Ps). These scripts provide a quick indication that all required measurements have been made and that service levels have been met. As tests are performed, the user is automatically informed whether the results pass or fail pre-defined thresholds. These thresholds can be customized by a manager. This process standardizes testing and offers technicians the highest degree of confidence the service works properly and additional dispatches are not required. Data Storage All test results can be stored on the Tech-X Plus using a timestamp, a unique name and other pertinent information. Field supervisors can automatically receive collected results that provide a real-time assessment of crew progress. If results do not pass thresholds, the supervisor can be immediately notified. These results also identify technicians who are not consistently following M&Ps or who may need additional training. Such trending information is also valuable for plant engineering and planning. Expert Analysis The Tech-X Plus employs Spirent’s automated expert diagnostics to accelerate troubleshooting in the field. By pressing a single button, an automated test is performed, and its results are immediately analyzed and correlated to identify faults. The faults are prioritized according to the greatest impact on service. For field technicians, guesswork is removed from testing. Quick isolation and repair of faults is ensured. Applications xDSL Modem Emulation Tech-X Plus emulates the xTU-R, enabling field technicians to separate network issues from in-house problems. The instrument emulates the xTU-R (customer modem) and trains with the DSLAM in the central office or remote terminal. By training with the DSLAM, results such as upstream/downstream rates, noise margin and errors are provided. Graphical results such as bits/bin and noise/bin are easily viewable on a large screen. The Tech-X has a single onboard modem that emulates ADSL, ADSL2, and ADSL2+. This removes the need for multiple plug-in modules to be carried by the field technician which can end up damaged or lost. DSL Expert Diagnostics ADSL 2/2+ standards provide Management Information Bases (MIBs) for service technicians to obtain expert diagnostics on the source of low data rates. This can be done without interpreting hundreds of individual results. Using the DSL Expert Diagnostics option, a technician receives a report indicating disturbers such as bridged taps, missing micro filters, WB noise (e.g., T1, HDSL) and how they directly impact the data rate. Results are provided in plain text. This option guides troubleshooting activities. The field technician avoids wasting time on problems that do not impact the data rate, thereby minimizing MTTR. The Tech-X Plus diagnostics option eliminates the need for each dispatched technician to be an expert at these new technologies. Fault isolation is quickly and reliably performed. IP Video Testing The Tech-X Plus provides field technicians with a comprehensive, yet easy to use tool for diagnosing problems with IPTV deployments. One button testing provides the user with a quick indication as to the Quality of Experience as received by the user. This measurement is a VMOS score, which is a numeric value between 1 and 5 that is used as a rating of the TV picture as seen by the customer. Should a more detailed analysis be required, measurements such as jitter, delay and packet loss can all be performed. IP/ATM Testing Once the xDSL link has been activated, the customer’s data, voice, and video services must be verified with various IP and ATM measurements. The field technician should attempt to verify connectivity to the Internet service provider (ISP) using various IP measurements such as an IP ping. By using a URL in a ping or trace route test, the technician is assured the customer can reach the desired IP address and that the domain name server (DNS) works properly. Tests such as a TraceRoute identify where excessive delay is introduced or how far the customer’s traffic can traverse the network before a failure. By using Tech-X Plus features, the technician verifies without entering the customer’s home, thereby decreasing time at each job. Web Browser The Web browsing feature further enhances the field technician’s ability to verify DNS operation and can also be used to provide a fast, visual confirmation to the customer that their service is fully operational and thereby eliminates the need for the field technician’s laptop to be carried in the field. Key Copper Features Multimeter (DVOM) Voltage, current, resistance, and capacitance (opens) measurements can be performed to determine loop length, capacitive and resistive balance, current and battery voltage. Furthermore, the Tech-X Plus identifies faults such as opens, shorts, battery crosses, bad splices, and more. Time Domain Reflectometer Tech-X Plus provides an extremely highprecision TDR so that load coils, bridged taps and faults can be found with ease. Fully functional and simple to operate, this TDR reduces time spent trying to locate the fault. Other TDR highlights include: Large graphical display for easy fault finding and analysis Isolation of faults 26,000ft (8km) away Auto detection of faults such as opens, short, bridgetaps, and more Resistive Fault Locator (RFL) RFL analysis is used for high-resistance faults that normally cannot be found by a TDR. Loop resistance, insulation resistance, and accurate location of ground and battery faults are easily found with a touch of a button. Wideband Services Testing DSL and other digital services require the loop be pre-qualified before service is installed. The Tech-X Plus performs wideband (WB) insertion loss up to 12MHz for comprehensive loss characterization of the copper pair. In addition, the Power Spectral Density feature automatically identifies noise disturbers of DSL service such as HDSL, T1 and others. These higher bandwidths are important for qualifying services such as ADSL 2+, VDSL and VDSL2, which far exceed the 1.1MHz spectrum covered by traditional ADSL testers. Graphical and numerical analyses of noise in WB frequencies quickly isolate and resolve trouble associated with intermittent modem sync and/or data rate. Lastly, a WB longitudinal balance measurement is available for stressing the copper pair at DSL frequencies to verify the noise immunity of the pair. Installation of Voice Services Various features such as drawing dial-tone, C-Message noise, VF loss and DVOM tests enable field technicians to ensure the voice (e.g. POTS) service meets service criteria after the copper pair has been conditioned. Various test numbers such as quiet termination, milliwatt and “drop battery” can be stored in the unit for automatic dialling before the measurement is made. Using the built-in speaker, the field technician can listen to various tones being received. In-Band Controllable Remote Unit The Tech-X Plus has an optional remote unit, simplifying field testing of wideband insertion loss measurements. Once placed on the correct pair, the remote unit reduces truck rolls and time consumed waiting for other technicians to complete a job. This unit can be remotely configured via the line under test and DTMF tones to perform various measurements. For example, the remote unit can be instructed to send wideband tones for the Tech-X Plus to receive. Lastly, once the trouble has been fixed, the field technician remotely configures a through mode and immediately places the customer back in service. The Remote Unit also operates as a far end strap when running the RFL test. The Tech-X Plus will automatically command the Remote Unit to open and short the pair as necessary in order to obtain the required measurements. This cuts down on the number of journeys that must be made to the far end of the pair which are normally required when using a manual strap. xDSL Specifications Line Modulations ANSI T1.413 Issue 2 ADSL G.DMT (G.992.1/2 Annex A) ADSL 2 (G.992.3/4 Annex A) ADSL 2+ (G.992.5 Annex A) Reach-Extended ADSL 2 (G.992.3 Annex L) G.Lite (G.992.2) Emulations xTU-R IP Encapsulations PPPoE (RFC 2516) PPPoA/LLC (RFC 2364) PPPoA/VC-Mux (RFC 2364) Bridged Ethernet IP Connectivity Tests ICMP Ping TraceRoute Name Server Lookup ISP Authentication ATM Connectivity Tests ATM F4 OAM Loopback ATM F5 OAM Loopback Line Results Data Mode Line Format DSLAM Vendor Modem State Modem Error Condition Output Power Up/Downstream Results Line Rate Actual Line Rate Max Line Rate Capacity Fast Bit Rate Interleaved Bit Rate Noise margin (dB) Attenuation (dB) Link Uptime Correctable FEC Errors Uncorrectable CRC Errors Interleave path HEC Errors Loss of Signal Severely Errored Seconds Errored Seconds Severe Errors Loss (dBm) Power Signal Attenuation (dBm/Hz) Received Blocks Transmitted Blocks Corrected Blocks Uncorrected Blocks Interleaved Delay Interleaved Depth HEC Error Count Total HEC Count 10/100 Specifications IP Results IP address Gateway address DNS address IP Video Specifications Test Parameters Tests Channel quality, Channel change time Channel Guides Up to 4 Encapsulation MPEG2 (MPEG2TS) over UDP, MPEG2 (MPEG2TS) over RTP over UDP, H.264 (MPEG2TS) over RTP over UDP. Codec UDP, MPEG2, H.264, MPEG 1 Layer II audio, MPEG2 audio, DOLBY AC-3 audio Video Stream Metrics Video Stream Metrics I,B, P Frames Recieved I, B, P Frames Lost I, B, P Frame Discards I, B, P Frames Errored FEC Effectiveness Opt FEC Block Size Opt FEC Correctable Pkts Ratio of Peak to Mean Bandwidth Video Stream Description Stream Type Image Size Image Type GoP Type GoP Length Avg Codec Robustness Content Sensitivity Receive Rate Peak Receive Rate Perceptual Quality Metrics Perceptual Quality Metrics Video MOS (text and graph) Audio MOS Audio/Video MOS Video Service Transmission Quality (VSTQ) VSPQ Gap VSPQ Burst VSPQ VSMQ Peak SNR Transport Metrics Network Stats Packets (Received, Lost, Discards) Frame Rate Packets OOS Burst MIU Lost Burst Duration Avg Gap MIU Lost Gap Duration Avg Channel (Change, Join, Leave) TR101 MPEG Stats Sync Loss Sync Byte Error Continuity Error Transport Header Error PCR Repetition Error PCR Discontinuity Error PTS Error Jitter/Delay Stats MAPDV Avg PPDV Delay ( Max & Avg) Jitter (Max & Avg) Expert Degradation Analysis Network Packet Loss Jitter Buffer Discard Video Codec Type Delay Copper Specifications Range Resolution Accuracy Additional Information DC Voltage 0 to ±5V ±5V to 300V 0.2V 0.1V ±2% ±1 digit ±2% ±1 digit Impedance: 100 k? AC Voltage 0 to 5V 5 to 250V 0.1V 0.2V ±2% ±1 digit ±2% ±1 digit Impedance: 100 k? Resistance 0 - 2 k? 2 - 20 k? 20 - 200 k? 200 k - 2 M? 2 M - 20 M? 1? 10? 100? 1 k? 10 k? ±2% ±1? ±2% ±10? ±2% ±100? ±2% ±1 k? ±2% ±10 k? Insulation Resistance 10 to 100 k? 100 k? to 1 M? 1 M? to 10 M? 10 M? to 100 M? 100 M? to 2 G? 100? 1 k? 10 k? 100 k? 1 M? ±2% ±2% ±2% ±2% ±5% Voltages: 30, 95, 500V Loop Resistance 0 - 10 k? 1? ±2% ±1? Open/Capacitance Meter 0 to 2000 nF 0.1 nF ±2% ±1 digit Loop Current 0 to 150 mA 1 mA 2% ±1 digit Load: 430? Noise Metallic 0 to 90 dBrnC 1 dBrnC ±2 dBrnC Filter: C weighted Noise Balance 90 dBrnC 1 dB ±2 dB Filter: C weighted VF Longitudinal Balance 100 Hz to 4 kHz 0 to 90 dB 0.1 dB ±1.0 dB WB Longitudinal Balance 10 kHz to 12 MHz 0 to 50 dB 0.1 dB ±5.0 dB VF Insertion Loss 100 Hz - 4 kHz 0 to 90 dB 0.1 dB ±1.0 dB Output Level: 0 dBm from remote device Impedance: 100? Wideband Insertion Loss 10 kHz to 12 MHz 0 to 90 dB 0.1 dB ±1.0 dB Output Level: 0 dBm from remote device Impedance: 100? or 135? PI Noise Balance 0 to 90 dB 0.1 dBrn ±2.0 dB C-message, Psophmetric, and D filter support Power Spectral Density (2.5 MHz test) 0 to -140 dBm/Hz 10 kHz to 2.5 MHz 0.1 dBm 4.8 kHz ±1 dBm/Hz ±1.0 dBm Impedance: 100?, 135? or Hi-Z Resolution specs are with zoom enabled Power Spectral Density (12 MHz test) 0 to -140 dBm/Hz 10 kHz to 8 MHz 8 to 12 MHz 0.1 dBm 5 kHz 5 kHz ±1.0 dBm ±1 dBm/Hz ±2 dBm/Hz Impedance: 100?, 135? or Hi-Z Resolution specs are with zoom enabled Time Domain Reflectometry (TDR) 300ft / 100m 1,300ft / 400m 3,000ft / 1km 6,500ft / 2km 13,000ft / 4km 26,000ft / 8km 0.5ft / 0.15m 1.7ft / 0.5m 4ft / 1.3m 8ft / 2.6m 17ft / 5.2m 34ft / 10.4m ±0.5% of range Vertical Sensitivity: 90 dB in steps of 6 dB Resolution specs are with zoom enabled Resistance Fault Locator (RFL) Location Range: 0 to 39,000ft / 12km Resistance fault range: 0 to 20 M? 3-wire: ±0.2% 4-wire: ±0.2% Remote Device Open Pair Short Pair In-service/Through mode Send tones (800 Hz to 2.5 MHz) Wideband Noise 30 dBrn to 90 dBrn 0.1 dBrn ±1 dBrn E Filter Impedance: 135? F Filter Impedance: 135? G Filter Impedance: 100? Impulse Noise E Filter - 30 - 110 dBrn F Filter - 40 - 110 dBrn F Filter - 40 - 110 dBrn ±0.1 dB ±0.1 dB ±0.1 dB ±0.1 dB ±0.1 dB ±0.1 dB Impedance: 135? Impedance: 135? Impedance: 100? Time duration up to 24 hours Maximum of 8 noise events recorded per second General Specifications Physical Characteristics Dimensions (H x W x D) Tech-X Plus 2.95 in. x 6.06 in. x 8.66 in., 75 mm x 155 mm x 220 mm Remote Unit 10.0 in. x 3.74 in. x 1.57 in., 255 mm x 95 mm x 40 mm Weight Tech-X Plus 3.3 lb., 1.49 kg. Remote Unit 1.58 lb., 0.72 kg. Display Transflective LCD with backlight and adjustable contrast 320x240 pixels (1/4 VGA) Case Material FR ABS Polycarbonate LED Indicators Sync, Copper, Data, Errors, Alarms, Charge Communictions Interfaces USB 2.0 10/100 Base-T, 3.5 mm headset jack Test Interfaces 10/100Base-T (x2) 4 mm (x5) Power Specifications AC Operations External AC adaptor/charger NOTE: Adaptor will charge battery while Tech-X Plus is in use. Battery Type LiON rechargeable Battery Life Tech-X Plus 8-10 hours, depending on use Remote Unit 7-24, depending on use Battery Recharge Time Tech-X Plus 3-4 hours Remote Unit 12 hours Environmental Requirements Operating Temperature –10°C to 50°C (14°F to 122°F) Storage Temperature -32°C to 70°C (–25°F to 158°F) Humidity Tolerance 0 to 93% RH at +40°C (104°F) Bump IEC 68-2-29 Drop IEC 68-2-32 Vibration IEC 68-2-6 Shock IEC 68-2-27 Water/Dust Ingress IP52 Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to contact us for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you! Contact: Test Equipment Store eBay Sales Phone: 1-419-517-6681 Toll Free : 1-800-548-2381 We Ship World Wide! We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate". Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information. We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities. UPS Ground United States USD 0.00 USPS Express Mail International (EMS) Worldwide USD 0.00 We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you ALL MAJOR CREDIT CARDS & PayPal ACCEPTED Put your listings on autopilot with Kyozou eBay Listing Software

Condition:	Seller refurbished: An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details. ...	Model	Tech-X Plus
Manufacturer	Spirent
MPN	T4200-5/BS