square plug for sale, brand-new and used.

You are bidding on a tested clean Square D I Line bus plug, Cat. # PQ3606G, 60amp , 480 volt, 3 wire with ground. I have many others reconditioned available.

You are bidding on a very clean, tested Square D I Line bus plug, Cat. # PQ4603G, 30amp , 480 volt, 4 wire. I have many others reconditioned available.

The Square D 200 Amp 20-Space 40-Circuit Outdoor Combination meter Socket and Main Breaker Load Center is suitable for use as a combination service entrance device (CSED). This unit is ANSI certified and UL listed with a maximum 10,000 AIR. The combination service entrance device features a Ring-type meter cover with a single-phase, 4-jaw meter socket.

Square D QO SurgeBreaker Surge Protective Device, QO2175SB Surge solutions from Schneider Electric empower homeowners to effortlessly protect their home from voltage surges generated within the home, lightning surges, and utility-related surge events.

SQUARE D METER PAK EZML331225 BRAND NEW UNOPENED Part Description: SQUARE D EZML331225 : METERING EZML BRANCH RINGLESS 225A 3P QDP Technical Description: QBP-TM/QDP-TM/QGP-TM/QJP-TM BREAKER; 240/120 VAC DELTA, 208 VAC STAR/120 VAC; BUS CURRENT RATING 1200 AMPERE; ALUMINUM/COPPER BUS MATERIAL; 1 SOCKET(S); PLUG IN SOCKET; SOCKET CURRENT RATING 225 AMPERE Model EZ Size 19.44 in W x 9.44 in D x 39.06 in H

This is a Square D PQ3620G fusible bus plug switch rated for 200A at 600VAC. It is 3P/3W with a ground. It comes with three 200A fuses and the instruction booklet.

This is a Square D PQ3603G fusible bus plug switch rated for 30A at 600VAC. It is 3P/3W with a ground. It comes with three 30A fuses.

This is a Square D PQ3606G fusible bus plug switch rated for 60A at 600VAC. It is 3P/3W with a ground. It comes with three 30A fuses and adapters.

Manufacturer: SQUARE D

These are plastic square caps used to protect the ends of light weight square tubing. These caps are for 1.25 inch square tubing and should fit tubing from .050 to .120 in (11 to 18 Gauge) wall thickness. The lot you are bidding on is a lot of 30.

These are plastic square caps used to protect the ends of light weight square plastic tubing. These caps are for 2 inch square tubing (Outside Measurement of Tubing is 2.00") and should fit tubing from .040 to .120 in wall thickness. The lot you are bidding on is a lot of 30.

These are plastic square caps used to protect the ends of light weight square plastic tubing. These caps are for 1.5 inch square tubing (Outside measurement of Tubing is 1.50") and should fit tubing from .050 to .120 in (11 to 18 gauge) wall thickness. The lot you are bidding on is a lot of 8.

These are plastic square caps used to protect the ends of light weight square tubing. These caps are for 3 inch square tubing and should fit tubing from .060 to .125 in (10 to 16 Gauge) wall thickness. The lot you are bidding on is a lot of 4.

These are plastic square caps used to protect the ends of light weight square tubing. These caps are for 1/2 inch square tubing and should fit tubing from .030 to .095 in (12 to 20 gauge)wall thickness. The lot you are bidding on is a lot of 15.

These are plastic square caps used to protect the ends of light weight square tubing. These caps are for 3/4 inch square tubing and should fit tubing from .030 to .095 in wall thickness (20Gauge to 12 gauge). The lot you are bidding on is a lot of 40.

These are plastic square caps used to protect the ends of light weight square plastic tubing. These caps are for 1 inch square tubing and should fit tubing from .040 to .095 in (12 to 20 Gauge) wall thickness. The lot you are bidding on is a lot of 30.

These are plastic square caps used to protect the ends of light weight square tubing. These caps are for 5/8 inch square tubing and should fit tubing from .030 to .095 in (12 to 20 gauge)wall thickness. The lot you are bidding on is a lot of 20.

System Sensor D4120 4 Wire Photoelectric Low-Flow Duct Smoke Detector The SYSTEM-SENSOR-D4120 4-wire photoelectric, low-flow, duct smoke detector senses smoke in the most challenging conditions, operating in airflow speeds of 100 to 4,000 feet per minute, temperatures of -4 degrees F to 158 degrees F, and a humidity range of 0 to 95 percent (non-condensing). A plug-in sensor head offers improved false alarm immunity and simple installation, testing, and maintenance.

3/8”-16 GH7 Plug Roll Form Tap Fastcut Tool - NEW - HSS USA – 2 pc lot T20 Up for auction – 3

BRUBAKER TAP 2”-8 PLUG 6 FL 3 TO 5 THD CHF NEW –T7 Up for auction BRUBAKER PIPE TAP 2”-8 PLUG 6 FL 3 TO 5 THD CHF NEW –T7 · 2”-