stainless steel gas springs for sale, brand-new and used.

Patented design pump head FEATURES: MANIFOLD: NEW high efficiency design concept. Patented forged brass for strength and no porposity for long life and higher hydrostatic pressures BOLTS: Eight 6mm grade 8.8 PLUNGERS: Ceramic coated stainless steel CRANKCASE: Precision die-cast cooling fins and anodized for maximum heat dissipation BEARINGS: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 6mm grade 12.9 Plungers: Special thick solid ceramic for long life, strong durability and more resilience Crankcase: precisions die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.

BRAND NEW RSV3G30D-F25EZ PRESSURE WASHER PUMP PURCHASED DIRECT FROM ANNOVI REVERBERI / AR NORTH AMERICA The AR North America RSV3G30D-F25EZ features a 3/4" hollow shaft with a gas engine flange, operates at 3400 RPM, and has a max PSI of 3000. This pump comes equiped with an Easy Start Valve that eases internal pump pressures that can make cold starts with gasoline engines difficult. AR (ANNOVI REVERBERI) TRIPLEX PRESSURE WASHER PUMP 3.0 GPM 3000 PSI INLET 3/8

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 8mm grade 8.8 Plungers: A special thick ceramic for long life, strong durability, and more resilience Crankcase: Precision die cast, large cooling fins, and anodized for maximum heat dissipation.

PART#: LGM20 LOAD GENIE MARK II UNLOADER CHECK VALVE. Features: Application: self contained unloading valve can be used wherever a continuous run air compressor is required. Combines all components required for continuous run compressors: pilot valve, vent valve, & check valve.

PART#: LGM20 LOAD GENIE MARK II UNLOADER CHECK VALVE. Features: Application: self contained unloading valve can be used wherever a continuous run air compressor is required. Combines all components required for continuous run compressors: pilot valve, vent valve, & check valve.

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 6mm grade 12.9 Plungers: Special thick solid ceramic for long life, strong durability and more resilience Crankcase: precisions die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.

This is a used Micro Matic S system keg coupler. Handle color may very from picture. Black or blue.

SPECIAL FEATURES FOR XT SERIES: Manifold is high strength forged brass for long term use.

This is a used Micro Matic D system keg coupler. Handle color may vary from picture. Micro Matic: D System - Draft Beer Keg Coupler - Tap with Red Lever Handle "D" system is the most common system available in the US, also known as American Sankey.

Rice HP-10 Pneumatic Hydrostatic Test Pump Pressure 10,000 PSI Oil Gas Steam, Used in good looking and working condition, came out of a working environment. Comes as shown in pictures. We treat items we are selling as items we are buying!

CHECK VALVE 1.25" LF Brand Name: Campbell Connections: 1-1/4 in. FIP x 1-1/4 in. FIP in.

var itemNumber = window.ebayItemID ?

VIENNA SELECT DUAL ISLAND MODEL # VSHC3-20-R-SQ-SC Serial #’s: 01095338 & 01095339

Stainless Steel Washdown Floor Scale Size: 48" x 48" Capacity: 5000 lb x 1lb Stainless steel indicator with serial output and rechargeable battery, AC adapter 100v-240v Stainless steel washdown / NTEP Flip Top for easy cleaning Brand new with 1 year manufacturer warranty

Beer Kegerator Keg Tap Fridge Draft Dispenser Bar Mini Refrigerator Home Cooler

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 6mm grade 12.9 Plungers: Special thick solid ceramic for long life, strong durability and more resilience Crankcase: precisions die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: eight 6mm grade 12.9 Plungers: A special thick solid ceramic for long life, strong durability and more resilience Crankcase: Precison die cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side. Valves, Seats, a