stainless steel mounting plate for sale, brand-new and used.

      For sale is a large brass and aluminum circular engraving fixture for new Hermes engraving machines.

huge cold plate freezer , biggest one that will fit in van cold plate freezer has four doors plugs into 110 V.A.C holds temperature entire selling day stainless steel exterior NO Dry Ice required length is 9ft 10inches width 3 ft 5 inches height 3ft has cut out for wheel well full length of freezer has mounting plates

558422 Compressed area capacity = 5.5" max; 1.25" min. Kit includes: (2) Heavy-Duty steel mounting plates(2) 8" M12 stainless steel size-adjusting bolts, nuts, flat & lock washers(4) M8 plate-mount bolts with flat and lock washers

Plate mount; Fits 1 5/8 in outside diameter tubing and 1 1/4 in pipe; Mounting plate is 3 1/2 in square with 2 5/8 in hole centers

materials: Flange and Support Arm — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. Concealed, 16-gauge (1.6mm) stainless steel mounting bracket. All-welded construction.

Ives Commercial PPLATE.10094 Stainless Steel Pull Plate Product Features M

A precision made mil-spec/aviation component manufacturer round solid aluminum rotary fixture plate with 8 threaded and 12 pocketed non-threaded through mounting holes. Big and heavy at roughly 28 lbs. Has a few very minor surface scratches and dings but overall in very nice shape.

Pulled from a model 919 slicer, should also work for other 919 series as well as 909. Included is the plate and rear mounting bracket, as shown. In good working order, good condition.

This auction is for one used Hammond S86811 stainless steel enclosure, 12 inches tall, 10 inches wide and 5 inches deep. Inside is a removable plate that can be used to attach your equipment too or removed for more space. This enclosure has two mounting flanges welded on the back of the enclosure located at the top and bottom, they measure 1.5 inches tall by the 10 inches wide of the enclosure.

Ted's Trucks 1181 County Rd 560 Midland City AL 36350 334-983-1092 ASI model 7720 surface ounted Soap Dish Support is fabricated of alloy 18-8 stainless steel, type 304. Dish is seamless construction, fabricated of 22 gauge with raised ridges for ventilation and drain holes provided at bottom of dish and is welded to a support post. Support post is fabricated of 1/2" x 1" (13mm x 25mm) 20 gauge rectangular tubing and a 18 gauge formed mounting plate welded on end.

Brand New! Versatile enough for use with any type of hard surface from walls to partitions to cabinetry, the Bobrick B-76867 Surface-Mounted Toilet Tissue Dispenser is a two-roll model that measures 12.5 inches in width by 3-15/16 inches in height. When mounted 20 inches above the floor, the unit fully complies with ADA and other barrier-free accessibility guidelines.

New! The Bobrick B-2890 Surface-Mounted Single Jumbo-Roll Toilet Tissue Dispenser is an attractive round toilet paper dispenser that is perfect for mounting on the insides of bathroom stalls. The door of the dispenser is made from type-340, 20-gauge stainless steel with a satin finish that reflects light but resists fingerprinting.