stainless steel spacers for sale, brand-new and used.

1200 LM LED Illuminator for Leitz Laborlux Microscope Dimmer PS USA/EU Description

Leitz Laborlux Microscope 20W LED Illuminator Retrofit Dimmer PS USA/EU

About this item Pitch spacers are made of molded plastic and provide the desired pitch toward the drainage side of the deck ceiling. By adding 1 additional spacer per joist you increase height or slope. These fasten to the joists with stainl

GREENLEE 7506 SLUG SPLITTER HYDRAULIC KNOCKOUT PUNCH 1/2" TO 2" STAINLESS STEEL a.imagelink {color:#3E4241;} a:hover.imagelink {color:#3E4241;} a:visited.imagelink {color:#3B426C;} a.imagelink img.auctionimage { border:

BRAND NEW RMW2.2G24-EZ PRESSURE WASHER PUMP For this model make sure your hoses connect to front of pressure washer. PURCHASED DIRECT FROM ANNOVI REVERBERI / AR NORTH AMERICA THERMAL RELIEF VALVE IS INCLUDED--$20.00 value 2400PSI, 2.2GPM Annovi Reverberi Direct Drive Pump

300 pcs male stainless steel 8-32 thread standoffs spacers. Thread on one end and radius on an other. Body 5/32" - 0.156" in diameter and 2.065" long.

18-8 Stainless Steel Flat Washer, #10 Hole Size, 0.281" ID, 0.625" OD, 0.125" Nominal Thickness, Made in US (Pack of 5) The 18-8 stainless steel flat washer is made in USA. The flat washer provides a bearing surface for fastener load distribution or is used as a spacer between components. The 18-8 stainless steel material provides strength and offers good corrosion resistance in many environments.

Typical Sizes: 1/4” – 1.25” Inlet & Outlet Port Sizes: 3/8” – 1.0” Standard Features: Viton O-rings 2” Sealing Washers Full Set of Graduated Spacers Dual Liquid Port 316 Stainless Steel Contact Parts Optional Features: Centering Devices Micro-Adjusters High Venting for Viscous Products Anti-foam Tube Port for Foaming Products Adaptable Mounting Heads For Other Manufacturers Machines Sanitary Inlet & Outlet Fittings C. I. P.

Four Gate Valve Bodies and Actuators. Valves separate into 3 parts as shown. Screws appear to be missing, not sure what other parts are missing.

Second Generation (MKII) - May 2014 - Improved materials specs, New design This is a POLY URETHANE, MANUAL CAST kit to prevent melting/warping problem in long extrusions. It is an upgrade kit for the Delrin Plunger. It replaces the existing plunger in Makerbot Replicator 2X.

Second Generation (MKII) - December 2014 - Improved materials specs, New design This is a POLY URETHANE, MANUAL CAST kit to prevent melting/warping problem in long extrusions. It is an upgrade kit for the Delrin Plunger. It replaces the existing plunger in Makerbot Replicator 2.

You are buying a Bowden style extruder plunger kit (right hand) as shown in the first image. Pictures are of the actual item you will get (stepper motor/drive gear not included). Key features: