+ Post new Ad
Starrett 568A V-Block And Clamp For Round Or Square Work, US $204.95 – Picture 0
Starrett 568A V-Block And Clamp For Round Or Square Work, US $204.95 – Picture 0

Starrett 568a V-block And Clamp For Round Or Square Work

US $204.95

  • Cleveland, Ohio, United States
  • Jan 30th
Open on mobile:
QR code
New Starrett 568A V-Block And Clamp For Round Or Square Work, 2" Diameter Round Capacity, 1-7/16" Square Capacity (1-9/16" With Screw At Top) .International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.   Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying Product Features Hardened steel, precision ground parallel and square V-grooves are ground central and parallel to the sides and base perfect alignment in matched pairs Clamps have screw holes at 45 degree and 90 degree to hold either square or round work Stepped groove construction permits high or low clamp mounting for small or large work Clamps do not project over the width of the block, permitting it to be used on the base, ends or sides  
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer Starrett
Model NO.568
Brand Starrett
Country of Manufacture United States

Directions

Similar products from Supporting Blocks & Sets

PRECISION V BLOCK MULTI 1-1/4" CAPACITY W/ CLAMP

PRECISION V BLOCK MULTI 1-1/4" CAPACITY W/ CLAMP

  • Ellington, New York, United States
  • Jan 30th
Mitutoyo 10003 0 Angle Block, +/- 20 sec Accuracy, 1 Degree

Mitutoyo 10003 0 Angle Block, +/- 20 sec Accuracy, 1 Degree

  • Richmond Hill, New York, United States
  • Jan 30th
Indexable Cut Off Blade Tool Block MGTBN 19-5 72459 USA <068>

Indexable Cut Off Blade Tool Block MGTBN 19-5 72459 USA <068>

  • Saint Louis, Missouri, United States
  • Jan 30th
Ina RCJY1-1/4-206 Pillow Block - NIB (Inv.23601)

Ina RCJY1-1/4-206 Pillow Block - NIB (Inv.23601)

  • Portland, Connecticut, United States
  • Jan 30th
V Block (Inv.26715)

V Block (Inv.26715)

  • Portland, Connecticut, United States
  • Jan 30th
45TAB10DF/GM P4 Ballscrew Bearing

45TAB10DF/GM P4 Ballscrew Bearing

  • United States
  • Jan 30th
Versa precision V-block - split bushing fixture

Versa precision V-block - split bushing fixture

  • Addison, Illinois, United States
  • Jan 30th
Universal Magnetic Chuck V Blocks 2 5/16 x 2 7/8 x 2&#034;

Universal Magnetic Chuck V Blocks 2 5/16 x 2 7/8 x 2"

  • Euclid, Ohio, United States
  • Jan 30th
Brown and Sharpe V-block 750-5 (Inv.31187)

Brown and Sharpe V-block 750-5 (Inv.31187)

  • Portland, Connecticut, United States
  • Jan 30th
Permanet Magnet Block (Inv.31188)

Permanet Magnet Block (Inv.31188)

  • Portland, Connecticut, United States
  • Jan 30th
VTG REID Tool Supply 2S Muskegon Heights, MI Machinists Lathe Mill Blocks Drill

VTG REID Tool Supply 2S Muskegon Heights, MI Machinists Lathe Mill Blocks Drill

  • Saint Charles, Missouri, United States
  • Jan 30th
LOT OF 5 MAGNETIC TRANSFER BLOCKS BRASS

LOT OF 5 MAGNETIC TRANSFER BLOCKS BRASS

  • Baldwinville, Massachusetts, United States
  • Jan 30th
MACHINIST TOOLS LATHE NICE Magnetic V Block Eclipse

MACHINIST TOOLS LATHE NICE Magnetic V Block Eclipse

  • Morris Plains, New Jersey, United States
  • Jan 30th
Heavy Duty Precision Ground Angle Plate 18-1/4&#034; x 6&#034; x 1&#034; NICE!

Heavy Duty Precision Ground Angle Plate 18-1/4" x 6" x 1" NICE!

  • Waterford, Michigan, United States
  • Jan 30th
SPi 98-284-3 2-3/8&#034; x 5&#034; x 2-7/8&#034; x 90 Degree Individual Magnetic V Block 2H

SPi 98-284-3 2-3/8" x 5" x 2-7/8" x 90 Degree Individual Magnetic V Block 2H

  • Saint Louis, Missouri, United States
  • Jan 30th
Starrett 578 V-Block and Clamp 4&#034; capacity edp no. 64960

Starrett 578 V-Block and Clamp 4" capacity edp no. 64960

  • Chicago, Illinois, United States
  • Jan 30th
RTS PRESTIGE 2162-4006 Matched Pair 90 Degree Magnetic Chuck V Block Set PA

RTS PRESTIGE 2162-4006 Matched Pair 90 Degree Magnetic Chuck V Block Set PA

  • Saint Louis, Missouri, United States
  • Jan 30th
Starrett No. S 154 L Parallels Set of Six (Inv.30175)

Starrett No. S 154 L Parallels Set of Six (Inv.30175)

  • Portland, Connecticut, United States
  • Jan 30th
IMPORT 637-7030 1/8&#034; x 1/2&#034; - 1-5/8&#034; x 6&#034; Matched Pair Precision Parallel Set 1M

IMPORT 637-7030 1/8" x 1/2" - 1-5/8" x 6" Matched Pair Precision Parallel Set 1M

  • Saint Louis, Missouri, United States
  • Jan 30th
Machinist 1 2 3 Block Set of 2 Nice condition o major scars

Machinist 1 2 3 Block Set of 2 Nice condition o major scars

  • Staunton, Virginia, United States
  • Jan 30th

People who viewed this item also vieved

LOT OF CARR LANE and VULCAN Mill work hold down clamps forged, tapped heel

LOT OF CARR LANE and VULCAN Mill work hold down clamps forged, tapped heel

  • Saint Paul, Minnesota, United States
  • Jun 3rd
Lot of Carr Lane, Vulcan, Bridgeport Mill work hold down clamps forged, tapped

Lot of Carr Lane, Vulcan, Bridgeport Mill work hold down clamps forged, tapped

  • Saint Paul, Minnesota, United States
  • Jun 3rd
LOT OF CARR LANE, VULCAN, TECO Mill work hold down clamps forged, tapped heel

LOT OF CARR LANE, VULCAN, TECO Mill work hold down clamps forged, tapped heel

  • Saint Paul, Minnesota, United States
  • Jun 3rd
Bull Nose Center - MT5 x 5.91&#034;

Bull Nose Center - MT5 x 5.91"

  • Saint Louis, Missouri, United States
  • Jun 4th
new RITEN Industries 2 MT HSS Full Dead 2MT Lathe Center 71021 USA

new RITEN Industries 2 MT HSS Full Dead 2MT Lathe Center 71021 USA

  • Champlain, New York, United States
  • Jun 4th
new RITEN Industries 8 Jarno HSS Dead Lathe Center 72081 USA

new RITEN Industries 8 Jarno HSS Dead Lathe Center 72081 USA

  • Champlain, New York, United States
  • Jun 4th
Kennametal 150TG0734 (47/64&#034;) 23223CE1 Collet in Great Condition

Kennametal 150TG0734 (47/64") 23223CE1 Collet in Great Condition

  • Simi Valley, California, United States
  • Jun 6th
Kennametal 150TG1500 (1-1/2&#034;) 18997CKO Collet in Great Condition

Kennametal 150TG1500 (1-1/2") 18997CKO Collet in Great Condition

  • Simi Valley, California, United States
  • Jun 6th
Kennametal 150TG0656 (21/32&#034;) 23381CE1 Collet in Great Condition

Kennametal 150TG0656 (21/32") 23381CE1 Collet in Great Condition

  • Simi Valley, California, United States
  • Jun 6th
10PCS PACK T-SLOT NUT M10 THREAD &amp; SLOT SIZE 12M CLAMPING SLOT TABLE ALLOY STEEL

10PCS PACK T-SLOT NUT M10 THREAD & SLOT SIZE 12M CLAMPING SLOT TABLE ALLOY STEEL

  • DELHI, DELHI, India
  • Jun 6th
12PCS PACK T-SLOT NUT M8 THREAD &amp; SLOT SIZE 10MM CLAMPING FOR TABLE SLOT HQ

12PCS PACK T-SLOT NUT M8 THREAD & SLOT SIZE 10MM CLAMPING FOR TABLE SLOT HQ

  • DELHI, DELHI, India
  • Jun 6th
Kipp 05530-2350742 Stainless Steel Latch with Pull Bar, Style B, Natural Finish,

Kipp 05530-2350742 Stainless Steel Latch with Pull Bar, Style B, Natural Finish,

  • USA, United States
  • Jun 6th
L672- FACEPLATE PARTS for LATHE

L672- FACEPLATE PARTS for LATHE

  • Annville, Pennsylvania, United States
  • Jun 7th
2&#034; MINI LATHE CHUCK - MT 2 ARBOR, MACHINIST Sherline NEW

2" MINI LATHE CHUCK - MT 2 ARBOR, MACHINIST Sherline NEW

  • Lakewood, California, United States
  • Jun 7th
Vertex, Chuck, Lathe, 3 Jaw Self Centering, 250mm (10in), New. VSC-10A-FB

Vertex, Chuck, Lathe, 3 Jaw Self Centering, 250mm (10in), New. VSC-10A-FB

  • Miami, Florida, United States
  • Jun 7th
VINTAGE WILTON 4.5&#034; BULLET VISE SWIVEL BASE VISE 8.5&#034; OPENING. A9450.. 50LBS

VINTAGE WILTON 4.5" BULLET VISE SWIVEL BASE VISE 8.5" OPENING. A9450.. 50LBS

  • Mechanicsburg, Ohio, United States
  • Jun 8th
NOS Premium Quality German Watchmakers Mechanics Machinists Hand Vise #WR7.2A72

NOS Premium Quality German Watchmakers Mechanics Machinists Hand Vise #WR7.2A72

  • Perth, Ontario, Canada
  • Jun 8th
VISE JAWS 8&#034; X 1&#034; X 2&#034;

VISE JAWS 8" X 1" X 2"

  • California, United States
  • Jun 8th
&#034;CottageCutz Elites Die -Cardinal Scene 3.8&#034;&#034;X5&#034;&#034;&#034;

"CottageCutz Elites Die -Cardinal Scene 3.8""X5"""

  • Hickory Hills, Illinois, United States
  • Jun 22nd
&#034;Trendz Double Pointed Needles 6&#034;&#034;-Size 8/5mm&#034;

"Trendz Double Pointed Needles 6""-Size 8/5mm"

  • Hickory Hills, Illinois, United States
  • Jun 22nd
Jacobs Collet Chuck 96-F1 with Backplate

Jacobs Collet Chuck 96-F1 with Backplate

  • Beaumont, California, United States
  • Jun 22nd
CNC Router Rotary Table Axis 3 Jaw Chuck 4th Axis 100mm Hollow Shaft &amp; Tailstock

CNC Router Rotary Table Axis 3 Jaw Chuck 4th Axis 100mm Hollow Shaft & Tailstock

  • shenzhen,Guangdong, China
  • Oct 29th
HAAS 3 STATION 5C 4TH AXIS INDEXER HA5C

HAAS 3 STATION 5C 4TH AXIS INDEXER HA5C

  • Hayward, California, United States
  • Oct 30th
HAAS 5C 4 STATION HA5C AUTOMATIC DIGITAL INDEXER 4TH AXIS

HAAS 5C 4 STATION HA5C AUTOMATIC DIGITAL INDEXER 4TH AXIS

  • Hayward, California, United States
  • Oct 30th
Lot of 8 Set-Up Blocks - 5x of 2&#034; x 4&#034; x 6&#034; &amp; 3X of 1&#034; x 2&#034; x 3&#034; - FU17

Lot of 8 Set-Up Blocks - 5x of 2" x 4" x 6" & 3X of 1" x 2" x 3" - FU17

  • Bloomfield, Connecticut, United States
  • Nov 3rd
Original Atlas Craftsman Metal Lathe 6 &#034; Dog Face Plate 1 1/2 X 8 tpi 9-15

Original Atlas Craftsman Metal Lathe 6 " Dog Face Plate 1 1/2 X 8 tpi 9-15

  • San Ramon, California, United States
  • Nov 4th
NICE Pair Milling Machine Centers or Workholding T-Slotted Riser Blocks 5 3/8&#034; H

NICE Pair Milling Machine Centers or Workholding T-Slotted Riser Blocks 5 3/8" H

  • Stoughton, Massachusetts, United States
  • Nov 4th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies