+ Post new Ad
STARRETT MACHINIST DRIVE PIN PUNCH SET - NEW, US $520 – Picture 0
STARRETT MACHINIST DRIVE PIN PUNCH SET - NEW, US $520 – Picture 0

Starrett Machinist Drive Pin Punch Set - New

US $520

  • Pittsburgh, Pennsylvania, United States
  • Jun 21st
Open on mobile:
QR code
In this auction you are bidding on :   ..... STARRETT MACHINIST DRIVE PIN PUNCH SET - NEW ....     Made by The L.S. Starrett Co.   Starrett Number S565.   “The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. SET of 8: 565A/B/C/D/E/F/G/H in Protective Vinyl Case”.   There are 3 Punches missing from this set: 1/16”, 1/8” & 3/16”. Specifications Length (in): 4" Length (mm): 100mm Material: Steel Set Quantity: 8 Sizes Included: 3/32", 5/32", 7/32", 1/4", 5/16"   The 5 Punches that are in this Set are NEW.         Payment may be via Pay Pal. Buyer also agrees to pay actual shipping and insurance charges. TERMS & CONDITIONS Your satisfaction with your auction win is my prime concern. I assure you the item you receive was described to the best of my ability and knowledge and is as pictured with no attempt to conceal flaws or damage. However.....if you are not happy with your purchase you may return it for a full refund of your bid price by following these 3 simple requests: 1) Contact me within 3 days of receiving your purchase and let me know of your intent to return. 2) Pack the item securely and return it to me via USPS Priority Insured mail with Delivery Confirmation. 3) Please email me the Delivery Confirmation number. Once the item is in my hands and I verify it is the same item shipped to you (yes regretfully there are those who have switched items on me hence everyone must suffer due to the few bad eggs) I will issue you a refund of your bid price via PayPal. Please note....I am sorry, but only your BID PRICE is refundable. The shipping fees go to the postal service and are not mine to refund. If you feel you cannot adhere to these rules to avoid any conflict, please do us both a favor and place your bid on another sellers item.

Directions

Similar products from Punch Tool Sets & Dies

Game Console Press Die mold [9*15MM,TDP-5] Candy Machine Puncher Dieset

Game Console Press Die mold [9*15MM,TDP-5] Candy Machine Puncher Dieset

  • Wenzhou,Zhejiang, China
  • Jun 22nd
Cool Skull Press Die Mold [8MM,TDP-5] for Candy Making Press Machine

Cool Skull Press Die Mold [8MM,TDP-5] for Candy Making Press Machine

  • Wenzhou,Zhejiang, China
  • Jun 22nd
Shield U Die Mold for Press Machine [TDP-1.5,10*8.2MM] Candy Maker Dieset

Shield U Die Mold for Press Machine [TDP-1.5,10*8.2MM] Candy Maker Dieset

  • Wenzhou,Zhejiang, China
  • Jun 22nd
Skull Press Flat Die Mold [8MM,TDP-5] for Candy Making Press Machine

Skull Press Flat Die Mold [8MM,TDP-5] for Candy Making Press Machine

  • Wenzhou,Zhejiang, China
  • Jun 22nd
U.S. MILITARY SURPLUS 3/4" DIAMETER X 7" LENGTH ROUND BRONZE PUNCH

U.S. MILITARY SURPLUS 3/4" DIAMETER X 7" LENGTH ROUND BRONZE PUNCH

  • San Antonio, Texas, United States
  • Jun 21st
New 2 5/8" - 8 UN RH Thread 4 1/2" Hex Die

New 2 5/8" - 8 UN RH Thread 4 1/2" Hex Die

  • Nashville, Illinois, United States
  • Jun 21st
New Widell 34030 Carbon Steel 3" - 8 UN RH Thread 5" Hex Die

New Widell 34030 Carbon Steel 3" - 8 UN RH Thread 5" Hex Die

  • Nashville, Illinois, United States
  • Jun 21st
New Widell 34022 Carbon Steel 2 1/2" - 8 UN RH Thread 4 1/2" Hex Die

New Widell 34022 Carbon Steel 2 1/2" - 8 UN RH Thread 4 1/2" Hex Die

  • Nashville, Illinois, United States
  • Jun 21st
LOT OF 6 NEW MOELLER 0117-RG87 PUNCHES RND 20 DIA X 25, P=9.58 B=12 P/S

LOT OF 6 NEW MOELLER 0117-RG87 PUNCHES RND 20 DIA X 25, P=9.58 B=12 P/S

  • Utica, Michigan, United States
  • Jun 21st
G.T.D. Greenfield #1852 1 inch Round Dies Stock Handle Wrench

G.T.D. Greenfield #1852 1 inch Round Dies Stock Handle Wrench

  • Edison, New Jersey, United States
  • Jun 21st
ROPER WHITNEY * NO.5 * JR HAND PUNCH KIT * 15 Pcs TOOL & 7 PUNCHES & 7 DIES NEW

ROPER WHITNEY * NO.5 * JR HAND PUNCH KIT * 15 Pcs TOOL & 7 PUNCHES & 7 DIES NEW

  • Baltimore, Maryland, United States
  • Jun 21st
WHITNEY JENSEN # 5 JR METALWORKING PUNCH SET COMPLETE IN FITTED PLASTIC BOX

WHITNEY JENSEN # 5 JR METALWORKING PUNCH SET COMPLETE IN FITTED PLASTIC BOX

  • Maple Park, Illinois, United States
  • Jun 21st
(2) Tap 1/2-24 NS Made in USA NEW - ACE HANSON - 2 PCS

(2) Tap 1/2-24 NS Made in USA NEW - ACE HANSON - 2 PCS

  • Waldorf, Maryland, United States
  • Jun 21st
(2) Tap 7/16-20 NF 25/64 Drill Made in USA NEW - ACE HANSON - 2 PCS

(2) Tap 7/16-20 NF 25/64 Drill Made in USA NEW - ACE HANSON - 2 PCS

  • Waldorf, Maryland, United States
  • Jun 21st
(2) Tap 7/16-20 NF 25/64 Drill Made in USA NEW - ACE HANSON - 2 PCS (2)

(2) Tap 7/16-20 NF 25/64 Drill Made in USA NEW - ACE HANSON - 2 PCS (2)

  • Waldorf, Maryland, United States
  • Jun 21st
Tap 1/2-20 NF 29/64 Drill Made in USA NEW - ACE HANSON - 1 PCS

Tap 1/2-20 NF 29/64 Drill Made in USA NEW - ACE HANSON - 1 PCS

  • Waldorf, Maryland, United States
  • Jun 21st
(2) Tap 1/2-20 NF 29/64 Drill Made in USA NEW - ACE HANSON - 2 PCS

(2) Tap 1/2-20 NF 29/64 Drill Made in USA NEW - ACE HANSON - 2 PCS

  • Waldorf, Maryland, United States
  • Jun 21st
Lot of 4 Die Holders, Deburring Tool, Forged Die Holder (E)

Lot of 4 Die Holders, Deburring Tool, Forged Die Holder (E)

  • Vinton, Virginia, United States
  • Jun 21st
Lot of 13 Threading Dies - GTD, Butterfield and More (E)

Lot of 13 Threading Dies - GTD, Butterfield and More (E)

  • Vinton, Virginia, United States
  • Jun 21st
(3) Tap 1/2-20 NF 29/64 Drill Made in USA NEW - ACE HANSON - 3 PCS

(3) Tap 1/2-20 NF 29/64 Drill Made in USA NEW - ACE HANSON - 3 PCS

  • Waldorf, Maryland, United States
  • Jun 21st

People who viewed this item also vieved

HOUGEN ROTABROACH CUTTER 1 3/4" DIA. BY 3" DEEP x 1 1/4" SHANK

HOUGEN ROTABROACH CUTTER 1 3/4" DIA. BY 3" DEEP x 1 1/4" SHANK

  • Roseville, California, United States
  • Jan 30th
Large 3/4" Federal Broach #78696 36" in Length NOS New Old Stock

Large 3/4" Federal Broach #78696 36" in Length NOS New Old Stock

  • Landenberg, Pennsylvania, United States
  • Jan 30th
TNMA-160420T Kennametal Grade K420 Carbide Insert 1 pc lot

TNMA-160420T Kennametal Grade K420 Carbide Insert 1 pc lot

  • Hendersonville, Tennessee, United States
  • Jan 30th
SPE-33L02 Ingersol Grade 111 Carbide Insert 1 pc lot

SPE-33L02 Ingersol Grade 111 Carbide Insert 1 pc lot

  • Hendersonville, Tennessee, United States
  • Jan 30th
10 TaeguTec RNG 45 T6, RNGN 120700 Grade AS20 Ceramic Inserts for Nickel-based &

10 TaeguTec RNG 45 T6, RNGN 120700 Grade AS20 Ceramic Inserts for Nickel-based &

  • VADODARA, GUJARAT, India
  • Jan 30th
Iscar Ceramic SNG-543-T Inserts (.018 x 20, Iscanite)

Iscar Ceramic SNG-543-T Inserts (.018 x 20, Iscanite)

  • Webster, New York, United States
  • Jan 30th
3 NEW 3/8" SHANK HSS END MILLS. 4 FL. .150" SLIGHTLY UNDER / OVER SIZED USA F65

3 NEW 3/8" SHANK HSS END MILLS. 4 FL. .150" SLIGHTLY UNDER / OVER SIZED USA F65

  • Mentor, Ohio, United States
  • Jan 30th
10 NEW 3 MM SHANK CARBIDE END MILLS. 4 FLUTE. BALL. USA MADE {E826}

10 NEW 3 MM SHANK CARBIDE END MILLS. 4 FLUTE. BALL. USA MADE {E826}

  • Mentor, Ohio, United States
  • Jan 30th
CLEVELAND WOODRUFF TWIST CUTTER 1" X 5/16" #1008 SURFACE TREAT ORIGINAL BOX

CLEVELAND WOODRUFF TWIST CUTTER 1" X 5/16" #1008 SURFACE TREAT ORIGINAL BOX

  • Pen Argyl, Pennsylvania, United States
  • Jan 30th
HOLE SAW SET, 12 PCS, 3/4" TO 5" DIAMTERS, TITANIUM COATED, MOSTLEY UNUSED.

HOLE SAW SET, 12 PCS, 3/4" TO 5" DIAMTERS, TITANIUM COATED, MOSTLEY UNUSED.

  • Overland Park, Kansas, United States
  • Jan 30th
WOW! Complete 9 Piece Set Critchley Type Reamers with Pilots Craftsman Excellent

WOW! Complete 9 Piece Set Critchley Type Reamers with Pilots Craftsman Excellent

  • Mandan, North Dakota, United States
  • Jan 30th
Vintage STANDARD TOOL CO.95 33 , straight Expansion Reamer 29/32, aprox 9" long

Vintage STANDARD TOOL CO.95 33 , straight Expansion Reamer 29/32, aprox 9" long

  • Tilton, New Hampshire, United States
  • Jan 30th
RS1232 Starrett hand hack saw blade redstripe 12" x 1/2" x .025" 32 TPI 40025

RS1232 Starrett hand hack saw blade redstripe 12" x 1/2" x .025" 32 TPI 40025

  • Chicago, Illinois, United States
  • Jan 30th
RS1224 Starrett hand hack saw blade redstripe 12" x 1/2" x .025" 24 TPI 40024

RS1224 Starrett hand hack saw blade redstripe 12" x 1/2" x .025" 24 TPI 40024

  • Chicago, Illinois, United States
  • Jan 30th
6 USED SOLID CARBIDE BORING BARS. 1/8" SHANK. MICRO 100 STYLE B-060 & 050 (F217}

6 USED SOLID CARBIDE BORING BARS. 1/8" SHANK. MICRO 100 STYLE B-060 & 050 (F217}

  • Mentor, Ohio, United States
  • Jan 30th
5 USED SOLID CARBIDE BORING BARS. 3/8" SHANK. MICRO 100 STYLE. B-320 (F227}

5 USED SOLID CARBIDE BORING BARS. 3/8" SHANK. MICRO 100 STYLE. B-320 (F227}

  • Mentor, Ohio, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies