steel epoxy for sale, brand-new and used.

All magnets we sell are N52 - strongest grade possible, and shipped from US. This auction is for N52 grade disk magnets Size: 10x4mm Coating: Zinc Plating Quantity: 10 Strength (gauss): 4,623 Pull to steel plate (lb): 6.86 Pull between steel plates (lb): 12.55 Magnet to magnet (lb): 6.86 Maximum heat tolerance: 175 F. 80 C.

This magnet size can be shipped only via Priority Flat Rate box due to size and strength. It will tear through the usual packaging we use for other sizes. Magnets of this size will cause injury if not handled carefully.

This magnet size can be shipped only via Priority Flat Rate box due to size and strength. It will tear through the usual packaging we use for other sizes. Magnets of this size will cause injury if not handled carefully.

All magnets we sell are N52 - strongest grade possible, and shipped from US. This auction is for N52 grade Disk magnets Size: 30x3mm Coating: Zink Plating Quantity: 2 Strength (gauss): 1.451 Pull to steel plate (lb): 17.71 Pull between steel plates (lb): 96.56 Magnet to magnet (lb): 17.71 Maximum heat tolerance: 175 F. 80 C.

1738UC9C.2.98 New Huck Magna-Grip Rivet Collars, Part Number MCG-R20UL. Each bid quantity is for a Lot of Twenty-Five (25) Collars. You may bid / buy any number of lots, up to the total quantity available above.

FOR SALE METAL RADIO HOLDER FOR THE UP TO 2 1/4 INCH BELT FITS: XTS5000 PLAIN MEASURES: 2 1/2 FRONT AND 1 3/4 DEPTH, 1 1/4 HEIGHT, AS LOOKING AT CLIP INSIDE LEFT INNER SIDE LIP FOR KEY PAD MADE OF STEEL, THE CLIP IS FINISHED WITH A DURABLE BAKED EPOXY COATING. THE SPRING-LIKE DESIGN SECURELY HOLDS PORTABLES IN PLACE YET ALLOWS EASY IN.. OUT ACTION REQUIRING ONLY ONE HAND USERS HAVE IMPROVED EFFICIENCY, SAVE MONEY AND REDUCE OR ELIMINATE DROPPED RADIO DAMAGE AND LOSS.

FOR SALE METAL RADIO HOLDER FOR THE UP TO 2 1/4 INCH BELT FITS: MEASURES: 2 5/8 FRONT AND 1 1/2 DEPTH, 1 1/4 HEIGHT, AS LOOKING AT CLIP INSIDE LEFT INNER SIDE LIP FOR KEY PAD, cut-out on rightside 1 1/2 x 7/8 MADE OF STEEL, THE CLIP IS FINISHED WITH A DURABLE BAKED EPOXY COATING. THE SPRING-LIKE DESIGN SECURELY HOLDS PORTABLES IN PLACE YET ALLOWS EASY IN.. OUT ACTION REQUIRING ONLY ONE HAND USERS HAVE IMPROVED EFFICIENCY, SAVE MONEY AND REDUCE OR ELIMINATE DROPPED RADIO DAMAGE AND LOSS.

FOR SALE METAL PORT-A-CLIP RADIO HOLDER FOR THE BELT FITS: MOTOROLA HT600, MT1000,RADIUS P200, MTX800 STYLES MEASURES: 2 5/8 X 1 3/8 MADE OF STEEL, THE CLIP IS FINISHED WITH A DURABLE BAKED EPOXY COATING. THE SPRING-LIKE DESIGN SECURELY HOLDS PORTABLES IN PLACE YET ALLOWS EASY IN...OUT ACTION REQUIRING ONLY ONE HAND USERS HAVE IMPROVED EFFICIENCY, SAVE MONEY AND REDUCE OR ELIMINATE DROPPED RADIO DAMAGE AND LOSS.

FOR SALE METAL RADIO HOLDER FOR THE UP TO 2 1/4 INCH BELT FITS: VERTEX VX800 WITHOUT THE REMOTE MIKE MEASURES: 2 7/16 X 1 9/16 with cutout right side as looking at bracket, 3 1/6 depth MADE OF STEEL, THE CLIP IS FINISHED WITH A DURABLE BAKED EPOXY COATING. THE SPRING-LIKE DESIGN SECURELY HOLDS PORTABLES IN PLACE YET ALLOWS EASY IN...OUT ACTION REQUIRING ONLY ONE HAND USERS HAVE IMPROVED EFFICIENCY, SAVE MONEY AND REDUCE OR ELIMINATE DROPPED RADIO DAMAGE AND LOSS.

FOR SALE METAL PORT-A-CLIP RADIO HOLDER FOR THE BELT FITS: KENWOOD TK380 W/TOUCHTONE KEYPAD & BATTERY KNB17A SIZE: 2 3/8" X 1 9/16 DEPTH, 1 1/4 HEIGHT OPENING ON SIDE IS 3/4" X 3/4" MADE OF STEEL, THE CLIP IS FINISHED WITH A DURABLE BAKED EPOXY COATING. THE SPRING-LIKE DESIGN SECURELY HOLDS PORTABLES IN PLACE YET ALLOWS EASY IN...OUT ACTION REQUIRING ONLY ONE HAND USERS HAVE IMPROVED EFFICIENCY, SAVE MONEY AND REDUCE OR ELIMINATE DROPPED RADIO DAMAGE AND LOSS.

FOR SALE METAL RADIO HOLDER FOR THE UP TO 2 1/4 INCH BELT FITS: VERTEX VX800 WITH REMOTE MIKE FNB-V62LI (PICTURE IS WRONG CUTOUT ON OTHER SIDE) MEASURES: 2 1/2 FRONT AND FRONT X DEPTH 1 5/8, CUTOUT 3/4 DEPTH CENTER ON THE RIGHT HAND SIDE AS LOOKING AT BRACKET (PUSH ON R/H SIDE AS LOOKING AT RADIO) MADE OF STEEL, THE CLIP IS FINISHED WITH A DURABLE BAKED EPOXY COATING. THE SPRING-LIKE DESIGN SECURELY HOLDS PORTABLES IN PLACE YET ALLOWS EASY

BRUCKER CO. CHICAGO IS LIQUIDATING EXCESS INVENTORY!!! ALL PIECES BRAND NEW IN BOX!

BRUCKER CO CHICAGO IS LIQUIDATING EXCESS INVENTORY!!! ALL PIECES BRAND NEW IN BOX! CHECK OUT OTHER LISTINGS!

SquareTrade © AP6.0 EMERSON Part# EK 163S 3/8 Sweat connections, FOR 3/8" O.D. TUBING. Refrigeration and Air Conditioning

General Filters Inc.99 59-99 Features: • Iron and galvanized steel construction for maximum integrity and durability; epoxy powder coat finish • Leak-proof construction with machined gasket seat • Low pressure drop, suitable for gravity flow and one or two pipe systems on pressure type burners • Micronic filtration suited to the smallest oil burner nozz

General Filters Inc. 77 59-77 Features: • Iron and galvanized steel construction for maximum integrity and durability; epoxy powder coat finish • Leak-proof construction with machined gasket seat • Low pressure drop, suitable for gravity flow and one or two pipe systems on pressure type burners • Micronic filtration suited to the smallest oil burner no

You are bidding on a Temperature and Pressure Relief Valve with Extended Shank model 10493. All brass body and stainless steel spring. - Pressure setting of 150 PSI.