(4) Four Brand New Simpson Strong-Tie HDQ8-SDS3 Hold Downs with SDS Screws. Item will be shipped as soon as payment is made. We thrive on honesty, quality, and super fast shipping.
(Red) Makerbot Replicator 1 & 2 Extruder Upgrade, Thingomatic w/MK7 Extruder - Delrin Plunger Replacement: I had real problems using the delrin plunger system so I purchased a spring loaded extruder upgrade but still had a few problems with not having enough pressure from the spring to keep the plastic against the drive gear (slippage). I redesigned a similar upgrade and use a heavier and stiffer spring then what I originally was using.
(2) (Left and Right) (Red) Makerbot Replicator 1 & 2 Dual Extruder Upgrade, Thingomatic w/MK7 Extruder - Delrin Plunger Replacement:I had real problems using the delrin plunger system so I purchased a spring loaded extruder upgrade but still had a few problems with not having enough pressure from the spring to keep the plastic against the drive gear (slippage). I redesigned a similar upgrade and use a heavier and stiffer spring then what I originally was using.
For Sale 2001 International 4700 lowprofile 9,900 miles (non CDL truck 22,000 LB’S) DT466E 2300 hrs 7.1 straight 6 cylinderTurbo IH engine 30 Qt capacity, the best engine runs perfectly clean. With engine heater and three new batterie’s starts right up.Allison 4 speed automatic with Econo saver19.5 rubber, 2 brand new Firestone front tires high speed balanced with 85% on the rears duals.
Features: Thin Kerf (2.5mm) - Easy to feed through the workpiece with less material waste. Also allows cutting of thicker material. Anti-Kickback - New shoulder design for additional safety, reduces dangerous kickbacks.
23HP Kohler 582. Powerful cast iron horizontal twin cylinder gasoline engine. Professionally rebuilt short block .010 over sized with about 300 hours on the motor.
KELLY VERTICALE SALUMI 370 S-K CE p + BLC DESCRIPTION THE PICTURE SHOW ALUMINUM BUT THE LAST THAT WE HAVE IS RED AND ALUMINUM Professional slicer studied to cut big cold-cuts, cheeses, bread and fish. The line studied even in the least details with big roundness and without any edge allows a simple and complete cleaning guaranteed also by the system BLC, block of the sliding carriage, w
Title of your page goes here 1941 MACHINE SHOP TOOLS LATHE MILL JIGS FIXTURES FOUNDRY GEAR CUTTING This is a 568 page, 5 3/4” x 8 1/2”, hardcover book titled The New Encyclopedia of Machine Shop Practice. The book was edited by George W. Barnwell Professor of Production Practice Stevens Institute of Technology and was copyrighted and published in 1941.
The Ramset Cobra, Combo Kit includes a Cobra+ 0.27 Caliber Semi-Automatic Powder-Actuated Tool, 1 box of 0.27 Caliber Strip Loads (100 per pack), and 1 box of 0.300 x 1-1/2 in. Drive Pins (100 per Pack), and 1 box of 0.300 x 2-1/2 in. Drive Pins with Washer (100 per Pack).
1400W High Pressure Washer 1400W High Pressure Wascher 1.Induction motor, long life,small noise, cooling effect of the motor shell is good, not easy fever, can be long time continuous boot; Motor cover is pressed by the st
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.