straight fab for sale, brand-new and used.

This Is The Genuine BoreMaster ZX-1000 Drilling Package 14 HP Kohler High Combustion Engine Complete With 125 Feet of 1-1/4" id Manufactured Drill Rods With Machined Joints

~ NEW *Chef's Choice* - #450 - Manual Diamond Hone 2 Stage Knife Sharpener ~ Knife sharpener; Comes brand new in box; Two stage; Stage 1 Sharpening: 20° angle (most abrasive micron diamond!); Stage 2 Honing: 22° angle (less abrasive micron diamond); 100% Diamond abrasive; Precision angle foolproof guides; For straight blades; Convenient handle; Dishwasher safe; Made in the USA! Easy to use instructions included. -Chef's Choice, by Edge Craft.

New Sealed Nobelbiocare 15° Esthetic Abutment NobelReplace RP 1mm 32381 15° Esthetic Abutment NobelReplace RP 1mm 15° Esthetic Abutment NobelReplace RP 1mm Ease of use – Prefabricated titanium abutment available in a selection of angulations (straight and 15 degrees) and varying collar heights Restorative flexibility – For single- and multiple-unit restorations, including immediate temporization (optional temporary coping available for ab

As shown with extension

***FREIGHT WILL BE COMBINED ON MULTIPLE BAR TOOL PURCHASES IF SHIPPED TOGETHER **** Just outside of Philadelphia there used be a Major WW II aircraft factory owned by Brewster Aircraft. Aside from having their one series of modestly successful aircraft including the Bermuda and Buckaneer, they had sub contracts from Vought and BF Goodyear to fab and sub assemble their Corsair aircraft.

Up for auction is (2) Heat-Fab 9805 Stainless Steel 8"x24" Straight Length These are both brand new These retail for $122.65 each Configuration Pipe Length Fuel Type Liquid Propane, Natural Gas

this sale is for; 1 BOX OF STRAPPING,,, .020 X 1/2",,, FAB W2112645 304 2B BANDING,,,UNKNOWN QUANTITY,, UNKNOWN MANUFACTURER,,, This strapping is not labeled with the quantity. The coil weighs 30 lbs ,,, i have counted the coils roughly to be 150 at a 3' length of the center of the roll leaving me to believe this coil contains about 500' or more. If you know how much this stuff weighs, then you should be able to determine the footage of the roll.

Saf-T Vent CI Plus is the leading commercial double-wall special gas vent system made from superferritic stainless steel. With increased airspace between the inner flue conduit and the outer jacket, today’s CI Plus reduces the required clearance to combustibles and makes a more rigid flue pipe – large diameters are easier to handle. Double Wall

Excellent 90 degree drill motor. This is from my personal tools and has hardly been used its super smooth , straight and quiet. This motor is like new but shows normal sign of use...

Zombie Hunter Challenge Coin Desk Plate with personalized name The enameled nickel coin features a Zombie Hunter on front and the coin is 1 3/4 inches in diameter. The coin is inset and sealed into the wood so it is not removable without possibly damaging the coin. Wood desk portion is solid wood and parts of it can have a rough un-sanded feel.

EOD Challenge Coin Desk Plate with personalized name The enameled coin features the US Explosive Ordnance Disposal seal which is 1 3/4 inches in diameter. The coin is inset and sealed into the wood so it is not removable without possibly damaging the coin. Wood desk portion is solid wood and parts of it can have a rough un-sanded feel.

US Army Coin Desk Plate with personalized name The enameled coin features the US Army seal which is 1 3/4 inches in diameter. The coin is inset and sealed into the wood so it is not removable without possibly damaging the coin. Wood desk portion is solid wood and parts of it can have a rough un-sanded feel.

Masonic antiqued bronze Coin Desk Plate with personalized name The antiqued bronze coin features Masonic symbols on the front and the coin is approximately 1 1/2 inches in diameter (39mm). The coin is inset and sealed into the wood so it is not removable without possibly damaging the coin. Wood desk portion is solid wood and parts of it can have a rough un-sanded feel.

Used approximately 203 sqft shell and tube head exchanger. (172) 3/4" T316 stainless steel straight tubes rated 150 psi @ 300 degrees F. T316 Stainless steel Shell 150 psi @ 300 degrees F.

var itemNumber = window.ebayItemID ?

Have you ever had to hold a square to a press brake die to get a square bend line ??? What about create a bolt on angle attachment from shop supplies for parts with rounded edges ??? If so Brock Fab Tools has the solution for you ---This listing is for a Press Brake Magnetic Squaring Arm with Angle Gauge.

Press Brake Magnetic Squaring Arm. Dual guide instant simultaneous repeatability. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------