Suburban Permanent Magnetic Compound Sine Plate 6" x 6" MC-66-FP-S1 w/ SP-66-S1, US $495.97 – Picture 0

Suburban Permanent Magnetic Compound Sine Plate 6" x 6" MC-66-FP-S1 w/ SP-66-S1, US $495.97 – Picture 1

Suburban Permanent Magnetic Compound Sine Plate 6" x 6" MC-66-FP-S1 w/ SP-66-S1, US $495.97 – Picture 2

Suburban Permanent Magnetic Compound Sine Plate 6" x 6" MC-66-FP-S1 w/ SP-66-S1, US $495.97 – Picture 3

Suburban Permanent Magnetic Compound Sine Plate 6" x 6" MC-66-FP-S1 w/ SP-66-S1, US $495.97 – Picture 4

Suburban Permanent Magnetic Compound Sine Plate 6" x 6" MC-66-FP-S1 w/ SP-66-S1, US $495.97 – Picture 5

Suburban Permanent Magnetic Compound Sine Plate 6" x 6" MC-66-FP-S1 w/ SP-66-S1, US $495.97 – Picture 6

Suburban Permanent Magnetic Compound Sine Plate 6" x 6" MC-66-FP-S1 w/ SP-66-S1, US $495.97 – Picture 7

Suburban Permanent Magnetic Compound Sine Plate 6" x 6" MC-66-FP-S1 w/ SP-66-S1, US $495.97 – Picture 8

Suburban Permanent Magnetic Compound Sine Plate 6" x 6" MC-66-FP-S1 w/ SP-66-S1, US $495.97 – Picture 9

Suburban Permanent Magnetic Compound Sine Plate 6" x 6" MC-66-FP-S1 w/ SP-66-S1, US $495.97 – Picture 10

Suburban Permanent Magnetic Compound Sine Plate 6" x 6" MC-66-FP-S1 w/ SP-66-S1, US $495.97 – Picture 11

Suburban Permanent Magnetic Compound Sine Plate 6" X 6" Mc-66-fp-s1 W/ Sp-66-s1

US $495.97

Jamestown, New York, United States
Mar 1st

Open on mobile:
QR code

Thank You For Looking At Our Products Product Information: Suburban Tool Permanent Magnetic Compound Sine Plate Series S1 w/ Sine Plate Product Features & Specifications: Permanent Magnetic Sine Plate Model MC-66-FP-S1 Serial No. 998-9905 Measures 6" x 6" x 2-5/8" Fine Pole Sine Set Compatible Includes (1) Side Rail Pictured *Please Notice The Surface Has Been Milled on Front Edge, See Pics Includes Suburban Tool Sine Plate Model SP-66-S1 Serial No. 9901 Sine Set Compatible Measures 6" x 6" 1/4"-20 Tapped Holes More Information About the Permanent Magnetic Plate From Suburban Tool Website: Models with the suffix "S0, S1 or S2" are part of the SineSet® System. The chucks are designed to bolt directly, with little or no indicating, to a SineSet® sine plate or compound sine plate of the same size and series to form a magnetic sine plate or magnetic compound sine plate. Can be used alone as a parallel chuck. The 4" x 4", 6" x 6" and 9" x 9" models can be used as squaring chucks. Made with ceramic magnets for superior holding power. Chucks are lubricated and sealed against dirt and liquids. Includes removable handle, side and back rails. FINE POLE (marked -FP): 1/8" poles and 1/8" separators produce shallow flux lines for holding small and thin parts. MODEL # POLE SPACING SineSet® SERIES LENGTH WIDTH HEIGHT SQUARE & PARALLEL WT(#) PRICE (US$) SineSet® COMPATIBLE MC-66-FP-S1 FINE S1 6" 6" 2-5/8" 0.0002" 25 $ 1,000 More Information About The Sine Plate Model SP-66-S1 From Suburban Tool Website: Made of steel, hardened to Rc 58-60. Sizes up to 6" x 6" have 1/4-20 tapped holes, larger sizes have 3/8-16 tapped holes. Model number SP-555 has T-slots for 1/4" T-bolts. Gage block roll has two 0.200" minute steps for setting small angles with standard gage block sets. Models with the suffix "S0, S1 or S2" are part of the SineSet® System. Other products with the same part number suffix will bolt directly to these sine plates (for compatibility chart click here). A locking strap that always remains below the top surface and two self-storing, hardened & ground rails are standard. Product Code: 15022701

Condition:

Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...

Manufacturer

Suburban