switch the position for sale, brand-new and used.

rfsupplier-ebay

Features: Double Pole Single Throw (DPST) Contact Type, 4 Pin Terminals, On-Off Rocker Switch. Used widely for car, motorcycle, boat, some machines, water dispenser, etc. Please pay attention to the voltage before ordering to make sure the rocker switch can work succes

Description: Operate at four directions, with the 30 degrees declination of operation handle, self-locking type operation. This monolever switch is designed in self-locking type, widely used in air solenoid starter, contactor, relay remote control.

4 Position DIP Switch "Piano" type DIP switch, manufactured by Grayhill, PN: 76SB04 Quantity of: 2 These switches are NEW/NEVER used ! Full spec: http://www.grayhill.com/assets/1/7/DIP_Series_76_SPST.pdf Fast safe & reasonably priced shipping. Bulk inquiries welcome.

8 Position DIP Switch "Piano" type DIP switch, manufactured by Grayhill, PN: 76PSB08T Quantity of: 2 These switches are NEW/NEVER used ! Full spec: http://www.grayhill.com/assets/1/7/DIP_Series_76_SPST.pdf Fast safe & reasonably priced shipping. Bulk i

8 Position DIP Switch "Piano" type DIP switch, manufactured by Grayhill, PN: 76SB08ST Quantity of: 2 These switches are NEW/NEVER used ! Full spec: http://www.grayhill.com/assets/1/7/DIP_Series_76_SPST.pdf Fast safe & reasonably priced shipping. Bulk inquiries welcome.

5 Position DIP Switch "Piano" type DIP switch, manufactured by Grayhill, PN: 76SB05T Quantity of: 2 These switches are NEW/NEVER used ! Full spec: http://www.grayhill.com/assets/1/7/DIP_Series_76_SPST.pdf Fast safe & reasonably priced shipping. Bulk in

2 Position DIP Switch "Piano" type DIP switch, manufactured by Grayhill, PN: 76SB02ST Quantity of: 2 These switches are NEW/NEVER used ! Full spec: http://www.grayhill.com/assets/1/7/DIP_Series_76_SPST.pdf Fast safe & reasonably priced shipping. Bulk inquiries welcome.

Features: 3 positions control and 8 terminals design. Combination switch mainly suitable for electrical wiring in the power switch and mouse cage type asynchronous motor start-up, reversing, speed switches, also can make the conversion of the control circuit. Ple

Features: 5 positions control and 12 terminals design, the plate and rotary switch cover is detachable. Rotary selector design switch is easy to control, square plate for easily mount. Combination switch mainly suitable for electrical wiring in the power switch and mouse cage type asynchronous motor start-up, reversing, speed switches, also can make the conversion of the control circuit.

4PDT, 12 screw terminals, On/On 2 Position Toggle Switch. Can be used on low voltage or high voltage circuits ideal for switching lights or motors. Each switch comes with two hex nuts, a flat washer.

DPDT, 6 screw terminals, On/On 2 Position Toggle Switch. Can be used on low voltage or high voltage circuits ideal for switching lights or motors. Each switch comes with two hex nuts, a flat washer.

SPST 2 screw terminals ON/OFF 2 Position Toggle Switch. Can be used on low voltage or high voltage circuits ideal for switching lights or motors. Each switch comes with two hex nuts, a flat washer, with waterproof rubber boot design.

Lot of (10) SPDT Miniature Toggle Switches ON/ON Solder Terminals, 2 nuts, 2 washers 7/32" Mount 7/16" exposed throw length 5/16" x 17/32" body Black Body, Chrome Colored metal on-on 250VAC 3A, 125VAC 6A, 12V This switch is NOT momentary. There is no center position, therefore if you only wire half the switch up, you end up with a SPST (on/off). Very versatile.

Lot of (5) SPST Miniature Toggle Switches ON/OFF Solder Terminals, 2 nuts, 2 washers 7/32" (metric thread pitch) Mount, approximately 3/32" available for mounting surface thickness. 7/16" exposed throw length 5/16" x 17/32" body Black Body, Chrome Colored metal on-off 250VAC 3A, 125VAC 6A, 12V This switch is NOT momentary. There is no center position, it is two position, two terminals.

SPST 2 Screw Terminals ON/OFF 2 Position Toggle Switch. Can be used on low voltage or high voltage circuits ideal for switching lights or motors. Each switch is designed with 2 hex nuts, a flat washer.