switch the position for sale, brand-new and used.

Dear,Need lots of order, please contact.Thanks! Contact:Anlosi Yang Skype:yyh327 Email:anlosi@lgswitch.com

Lot of 5 new Centralab Model 1460 1-Pole, 2-Position Rotary Switches. For 3/8" mounting hole. Shaft is 2" long.

2-position, 2-pole Rotary Switch Dimensions: 25 x 12mm (knob not included) Mounting Hole Diameter: 9mm / 0.35" Shaft Diameter: 6mm/0.24"

ALPS Rotary Switchsit turns continuously without a start and stop position ????????

ALPS Rotary Switchsit turns continuously without a start and stop position ????????

ALPS Rotary Switchsit turns continuously without a start and stop position ????????

McGill 3193-0903 Toggle Switch 3 Position on-off-on Spring Loaded Returns to off position when let go. NEW! Mercury Quicksilver P/N F717602 6A 125 V.A.C.

Lot of Four 4PDT on/off/on Miniature Black Toggle Switches Four Pole Double Throw Three Position ON/OFF/ON Solder Terminals, 2 nuts, 2 washers 7/32”(about 6mm) mount 7/16” exposed throw length Body: L 23mm x W 13mm x H 11mm (29/32” x 1/2” x 7/16”) Overall height including solder terminal 1-3/8” Black Body, Chrome colored metal 3A 250VAC, 6A 125 VAC ON OFF ON not momentary, three position From bulk packaging, not in retail pa

lot of 2 Crouss-Hinds 82612 3 POLE, SINGLE THROW, 250.0 volts AC max 1 2 3 phase 6 tab,Nonpile-up Contact Arrangement 3 pole, single throw, both positions maintained single switch unit, contact Load Current Rating at Maximum Rated Voltage10.000 amperes resistive ac Actuator Position-Action Relationship Up position maintained and down position maintained Body Style Bushing mount

2 X SOEG-RT-M12-PS-S-2L Festo Diffuse light sensor NEW!!

THIS IS A NEW HONEYWELL N20010 SMARTACT DAMPER ACTUATOR N20010 Honeywell Damper actuator 20/34 Nm, SmartAct Direct-coupled actuator with self-centering shaft adapter. For air dampers, air handlers, ventilation flaps, louvers and VAV-units.

Extech 407766 Sound Level Calibrator with 94 dB or 114 dB Output New in Box - Factory Warranty Extech

This is New Old Stock TPI Oscilloscope Probe kit SP100, this item is new and contains all the accessories. This is a passive probe that has a 3 position slide switch Position x 1Position Ref.Position x10This item has a cable length of 1 1/2 meters. This is a quality item that is next to impossible to

Elenco P-1E Scope Probe 65MHz x1 x10 Built-in 2 Position Switch; X1; X10; Complete w/ Accessories Fits All Scopes w/ BNC Connector Compensation Range 10 to 35pF. Includes MiniGrabber; Insulating Tip; Adjusting Tool; Channel Identifier Clips and IC Tip Length - 60 Features: Specifications: POSITION - X10 Attenuation Ratio 10:1 Bandwith DC to 65MHz Rise Time 5.5nS Input Impedance 10M ohm when used with oscilloscopes with 1M ohm input Input Capacitance Approx.

250MHz x1 x10 Oscilloscope Probe Elenco P-3E Built-in 3 Position Switch; X1; X10; Ref. Complete w/ Accessories Fits All Scopes w/ BNC Connector Compensation Range 10 to 35pF Length - 60 Features: Specifications: POSITION - X10 Attenuation Ratio 10:1 Bandwith DC to 250MHz Rise Time 1.4 nS Input Impedance 10M ohm when used with oscilloscopes with 1M ohm input Input Capacitance Approx.

Model Number: 8.712-236.0 Karcher: Switch,Cam-25a'off/Pump/Burner - 8.712-236.0 - Landa Legacy Hotsy Shark Position - “Off”- “Pump"- "Burner” Part No 8.712-236.0 Original No. 410251 Amp 25 Wiring Poles 1 Phase 1 Voltage 120 HP 1.5

Two-Position Zone Motor, used with two-wire, 24-volt room thermostat or other controller for two position damper control. Features