synflex hose for sale, brand-new and used.

Hydraulic Tools Underwater Stanley commercial diver, diving, Amron, Kirby Morgan kirby morgan Designed for Commercial Diving Operations Manually Operated Hose Reel With 200 Feet of BLACK TWIN SYNFLEX HYDRAULIC HOSE Aluminum

For Sale is Saint-Gobain 42802 Synflex 3640-04 1/4" WP 250 PSI 17 Bar Hose. Other tag identifiers are Thermal Dynamics 266 x 50-1 (8-1116). I purchased as part of an inventory reduction sale.

Bid is for some new (old stock/un-used) and some used fittings of like pressure capacity.

var itemNumber = window.ebayItemID ?

You are bidding on a Syntex Hydraulic hose. Item was pulled from a working environment, but has not been tested. Hose is approximately 250' (calculated using the following formula: (( 3.14 * 32) / 12 ) * 30 = 251.2 With 32 representing the diameter of the roll, 12 representing inches in a foot to convert into feet, and the 30 representing the approximate number of coils in the roll)

Synflex 3600-04 1/4" diameter 250 psi wp (17 Bar) pvc coated hose.There is +/- 108' we will call it a hundred for bidding purposes and you get a bonus few feet.The hose is used with some scrapes and marks. There is one cut in the cover about 1/4" long it does not extend to the core and is protected by the red tape (photos). It is about 30' from the open end.

This is a new 35ft section of hydraulic jack hose, markings on the hose P/N 300-04-4500 1/4" ID 2200 W.P. 152 Bar W.P for RV.

Eaton Corp. SYNFLEX 34PW-04 Pure Water Hose 2750 PSI Size 04 Per Linear Foot Specifications: Part: 34PW-04 / Alt. MIL-H-24520 / Alt.

Hose has been honorably used and cared for...These sell new for around $800.00...

Brand new. Model 3440-04, High Pressure CO2 regulator hose, brand new, 2750 PSI MAX (190 BAR) 6 foot length 3440-04 Gas-Lok W.P. Brass hex nut connects directly to CO2 tank 1/4" Threaded female connector for connecting to 1/4" Male flare on regulator hose

New high pressure hose for Co2, Air or N2 gases. Home Brewing, Soda, And or Beer systems. Comes with red washer and cylinder wrench.

For Sale is a Saint-Gobain 42869 Synflex 3640-06 3/8" WP 250 PSI (17 BAR) HOSE with a Thermadynek Thermal Dynamics inventory tag identifying 265 x 50-1 (8-1118). I purchased as part of an inventory reduction sale. Hose is new but has been stored for many years.

This is a 19 foot cut length of Synflex 3440-04 Moisture-Lok hose. Synflex 3440 Moisture-Lok Hose Synflex 3440 Moisture-Lok Hose is a Synthetic fiber reinforced Polyolefin tube hose with a Perforated, polyurethane cover Used for: Conveying urethane foam components Moisture sensitive chemicals

<font size="5"><strong>&lt;font size="5"&gt;&lt;strong&gt;&amp;l

250' of Synflex 3800 Hose - 3/8" 100R8 hydraulic hose Eaton Corp- 3800-06 Please let me know if you would like ends attached to this hose or a custom length cut.

High pressure hose that was on a Co2 regulator used on a Soda and Beer system. 6 ft long.

High pressure hose that was used on a Co2 cylinder to regulator system for Soda systems. Can also be used on beer systems as well. Standard brass nut connector to male cylinder threads and 1/4" female flared end.

2 Pack Eaton Synflex JIC 37 Degree Female Swivel Fitting 3903-04544 Recommended Eaton-Synflex Hose style(s): 3630 (-03 to -12)