T-1000s Sd Card Ws2801 Ws2811 Ws2812b Lpd6803 Lpd8806 Led 2048 Pixels Controller

US $42.00

Rowland Heights, California, United States
Jun 9th

Open on mobile:
QR code

T-1000S SD Card WS2801 WS2811 WS2812B LPD6803 LPD8806 LED 2048 Pixels Controller Product Description Description: Memory card: type:SD card Capacity:128MB-2GB Store file:*.led Physical parameters: Working temperature :-30-85degree celsius Working voltage:DC5V / DC7.5-24V Working power:2W Weight:0.3kg Size:L165mm×W80mm×H30mm Signal port:3pin connect port Package List: T1000S Controller* 1piece SD Card* 1piece T-1000S System features 1.32-65536 Gray,Support software Gamma correction. 2.Support point, line, surface, rules and special-shaped handle. 3.Single-port output,can support 2048 pixels. 4.Multiple controllers can be cascaded together and work synchronous, play back content stored in the SD card. 5.Compatible with single line or double line chips. NOTE: When T1000S controller load less than 512 pixels the frame rate can reach 30fps. When T-1000s control more than 512 pixels the frame rate will slow down automatically. Support IC (one IC symbolize a pixel point ) Definition of buttons Features: 1. 256 Gray,Gamma correction processing software. 2. Support the rules and special-shaped handle. 3. Controller, a port output, may bring 1024/2048 light. 4. Off-line control, play back content stored in the SD card 5. T-1000C store a maximum of 16 documents Note: The model T-1000S with one port output, When it control 512 pixels the speed can reach 30fps, more than 512 pixels, the frame speed will be slow down automatically Connection diagram: Regulatory function button: System architecture diagram: Specific parameters: Memory Card: . Type: SD Card . Capacity: 128MB-2GB . File Format: FAT file format . Store files: *.led Physical parameters: . Weight:0.2kg . Size:122mm*67mm*25mm . Temperature :-40-85 Degree . Volgate: DC5V / DC7.5-24V . Power:3W Note: To copy files to SD card, you must first format to the SD card, pay attention to is that each copy must be formatted before. SD card must be formatted as "FAT" format. NOTE:For the TTL(SPI) signal, the controller signal ground must connect to the LED lamp ground directly. inkfrog terapeak On Sep-13-15 at 06:58:06 PDT, seller added the following information:

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	ISHARELED
Country/Region of Manufacture	China
MPN	Does Not Apply
UPC	Does Not Apply