K O Lee tool and cutter grinder comes with vise and other attachments. In very good condition. Model B300X, Serial # 25744 XL, T-Slot table 22" x 3 5/8".
Call/Text or email Dan for more info and video 312-848-9514 dan@machinetoolbids.com Hardinge GX480 2007 Machine Type...............Vertical Machining CentersManufacturer.
KIOSK Point of Sale System with BackUp System This is a working entry level POS. All peripherals have been cleaned and tested. System brings the following: Laptop / Notebook.
Info from the Infinity Cutting Tools: Coping Sled ! The Infinity Tools Professional Coping Sled is the fastest, safest and most accurate way to produce crosscuts in stock up to 7" wide. It's solid aluminum construction, Lexan safety visor and quick-set toggle clamps set this production quality coping sled apart.
YOU ARE BUYING A USED TECHNO CNC ROUTERMODEL - HD-S SERIES 60120SERIAL NUMBER - H-1303-04312-031513X - AXIS TRAVEL = 60.0"Y - AXIS = 120.0"Z - AXIS = 9.0"GANTRY CLEARANCE = 7.5"DISTANCE BETWEEN UPRIGHTS = 67.0"FOOT PRINT = W = 90" ,L = 147" ,H = 60"- CONTROL SYSTEM : CLOSED LOOP OSAI CNC CONTROLLER- BRUSHLESS AC SERVOMOTORS- DELTA AC DRIVES
TABLE IS FLAT AND PARALLEL, 38,000 WEIGHT CAPACITY, 10 T SLOTS 1.065" SLOT, 1.875" T, 5 KEY WAYS FULL LENGTH OF TABLE 1.062" X .530" DP., TABLE IS AIR LIFT WITH 4 LOCK PIN LOCATIONS EVERY 90 DEGREES, OVERALL HEIGHT OF TABLE APPROXIMATELY 12", MANUAL INCLUDED, TABLE WEIGHS APPROXIMATELY 9,000#
Details: Manufactured from High grade seasoned casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1 Center Bore MT-2 T Slot 16mm Horizontal Height : Approx 80mm from Base to Top surface of Chuck Satin Chrome Dials Graduated 360 degree around
Details: Manufactured from High grade seasoned casting and powder coated wrinkled finish for smooth looks. Precision ground chuck and overall smooth surface. Gear Ratio 90:1 Center Bore MT-2 T Slot 16mm Horizontal Height : Approx 80mm from Base to Top surface of Chuck Satin Chrome Dials Graduated 360 degree around
Hardinge H4 indexer, 15 degree hash marks, with 1/2" C5 collet.Hardinge tailstock with #1 moorse taper spindle, . T slot mounting bolts included... for both Headstock and Indexer.A used indexer with grind marks, nut brazed on indexer, doesn't effect operation.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.