tap feed for sale, brand-new and used.

J6 NO. 5/16-5/8 COLLET - STM Guaranteed Depth Control Within ±0.004" Applications Depth Control Tap will advance .140" ±.004" after machine spindle travel stops. Example: to achieve a tap depth of 1.000", set spindle stop at .860" will advance an additional .140" to 1.000" depth NC Machine Set torque as high as possible within safe limits of the tap.

Network General WAN Monitor TAP Module - HSSI IN & OUT Interfaces without Cable If no software, cables, rack ears, or power supplies are pictured or are offered in the ebay description or Ad then they are not included in this. listing. The photo is one of actual item and is representative of all of them.

brand new multi tap 50va 24vac transformers 120 to 480vac feed taps

Up for sale is a Phoenix Contact DB15 terminal block. The VARIOFACE feed-through module implements a 1:1 connection between screw connection terminal blocks and a D-SUB miniature socket strip (number of positions: 15). A separate ground tap is available.

12 pin socket for 1.5" inline scintillator solid or well type with built isolated signal tap for MCA spectroscopy. Connection for high voltage has signal combined to the female BNC connector as well as optional isolated signal output 1/8" 3.5mm side jack both outputs can be used together at the same time one to feed a computer and the other to feed a counter as normal. Dynode string resisters are 10 meg ohm per with cathode resister of 22 meg ohm and input plate isolator if 1 meg ohm.

(C-4-6-3-2) BRAND NEW FACTORY FRESH M2.5 X 0.45 HSG D1 2 HI SPIRAL FLUTE SCREW THREAD INSERT TAP MADE BY REGAL CUTTING TOOLS. SIMILAR COATED TOOLS RETAIL FOR OVER $50 BEFORE SHIPPING IS ADDED. TOOLS WARRANTED TO YOUR INSPECTION FOR 14 DAYS AFTER SHIPPING FOR PRICE OF TOOL ONLY.

(B-2-4-7-3) FACTORY FRESH, M3 X 0.5 D1 BOTTOM 2 HIGH SPIRAL FLUTES SCREW THREAD INSERT TAP. MADE BY REGAL CUTTING TOOLS. TOOLS WARRANTED TO YOUR INSPECTION FOR 14 DAYS AFTER SHIPPING FOR PRICE OF TOOL ONLY.

(B-2-4-7-2) FACTORY FRESH, #4 X 48 NF HSG H2 3 FLUTE TAPER TAP MADE BY REGAL CUTTING TOOLS. TOOLS WARRANTED TO YOUR INSPECTION FOR 14 DAYS AFTER SHIPPING FOR PRICE OF TOOL ONLY. TOOLS THAT ARE YOU HAVE USED ARE NOT RETURNABLE.

(H-1-1-4) BRAND NEW FACTORY FRESH INVENTORY AT A NEW LOWER PRICE, THESE ARE 5/8 X 24 NEF HSG H3 6 FLUTE TAPER TAPS MADE BY REGAL CUTTING TOOLS. SIMILAR TOOLS SELL FOR OVER $44 IN MSC'S NEW BOOK. TOOLS WARRANTED TO YOUR INSPECTION FOR 14 DAYS AFTER SHIPPING FOR PRICE OF TOOL ONLY.

(H-1-1-6) BRAND NEW FACTORY FRESH INVENTORY AT A NEW LOWER PRICE, THESE ARE 5/8 X 24 NEF HSG H3 6 FLUTE TAPER TAPS MADE BY REGAL CUTTING TOOLS. SIMILAR TOOLS SELL FOR OVER $44 IN MSC'S NEW BOOK. TOOLS WARRANTED TO YOUR INSPECTION FOR 14 DAYS AFTER SHIPPING FOR PRICE OF TOOL ONLY.

(H-1-1-5) BRAND NEW FACTORY FRESH INVENTORY, AT A NEW LOWER PRICE, THESE ARE 5/8 X 24 NEF HSG H3 6 FLUTE PLUG TAPS MADE BY REGAL CUTTING TOOLS. SIMILAR TOOLS SELL FOR OVER $44 IN MSC'S NEW BOOK. TOOLS WARRANTED TO YOUR INSPECTION FOR 14 DAYS AFTER SHIPPING FOR PRICE OF TOOL ONLY.

(D-2-3-4-10) FROM PUBLIC AUCTION, NEW, NEVER USED, THIS IS A 3/4 X 14 NPT .100 PROJECTION PIPE TAP 6 FLUTE TIN COATED. MADE BY NORTH ATTLEBORO. REASONABLE BEST OFFERS CONSIDERED FOR MORE THAN 1 ITEM.

(E-2-11-3-26) INDUSTRIAL SURPLUS THIS IS A NEW NEVER USED1/2 X 14 NPT HSG .260 PROJ 4 FLUTE PIPE TAP MADE BY REGAL CUTTING TOOLS. WARRANTED TO YOUR INSPECTION FOR 14 DAYS AFTER SHIPPING FOR PRICE OF TOOL ONLY. TOOLS THAT ARE YOU HAVE USED ARE NOT RETURNABLE.

(E-2-11-2-25) INDUSTRIAL SURPLUS THIS IS A NEW NEVER USED 3/4 X 14 NPT HSG 3 SPIRAL FLUTES X 3 OAL PIPE TAP .560 SHK. WARRANTED TO YOUR INSPECTION FOR 14 DAYS AFTER SHIPPING FOR PRICE OF TOOL ONLY. TOOLS THAT ARE YOU HAVE USED ARE NOT RETURNABLE.