tapcon 1/4 drill bit for sale, brand-new and used.

This is a new Bosch RH228VC 1 1/8" Bulldog SDS Plus Rotary Hammer Package that includes the following: RH228VC Bulldog Rotary Hammer 2.4 ft-lbs impact energy provides increased drilling capacity (from 1 in. to 1-1/8 in.) and up to 40 percent faster drilling speeds vs the competition Counter-balance vibration control for improved comfort for all day drilling/chiseling applications All new Bulldog extreme max h

This auction is for 5 (five) 3/16 x 4-1/2" drill bits for use with tapcons. They will be mailed in a bubble mailer. Shipping is $2.50 for the first set of 5.

I bought this rotary hammer drill new last year and used it twice, for a grand total of four 1/2" holes, 4" deep, in concrete. Fifteen minutes tops! Went through it like a hot knife through butter.

TAPCON Hex Head Box of 90 Concrete Anchors Masonry Tapping Screws 1/4 ” x 3- 1/4 ” +

Lot of 9 - 2-Pack Tapcon #50410 Screw Concrete Screw Anchors 1/2"x6" Drill/Drive - NEW - (TOTAL OF 18 SCREW ANCHORS) For Solid Concrete and Grout Filled Block Drill Bit - 7/16" Minimum Embeddment - 2" Drive with Drill or Wrench (3/4" socket) THANKS FOR SHOPPING WITH US AT STONEFIELD VARIETY STORE!! (Note: If more than one shipping option is offered

9 - Tapcon #50420 Screw Concrete Anchors 5/8"x6" Drill/Drive - NEW For Solid Concrete Only Drill Bit - 1/2" Minimum Embeddment - 2-3/4" Drive with Drill or Wrench (3/16" socket) THANKS FOR SHOPPING WITH US AT STONEFIELD VARIETY STORE!! (Note: If more than one shipping option is of

1000 hex washer head concrete anchors1/4" hex drive These Pluscoat screws are 3/16" high-low thread & 1-1/4" in lengthMEET OR EXCEED ASTM INDUSTRY STANDARDS(no drill bit is included at this time)

100 Tapcon Style Anchors 1/4 x 3-1/4 Slotted Hex Head With drill bit

TAPCON Masonry Fasteners 1/4 x 3-3/4" Phillips Flat Head with Drill Bit Original. 100 Count

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

Red Head Midwest Fastener-Tapcon Masonry Hex Head, 1/4x2-1/4" Pk100 w/drill bit Factory sealed box.

Midwest Fastener Corp.--Tapcon Masonry Hex Head, 1/4x2-1/4"L , Pk100 w/drill bit Factory sealed box.

Midwest Fastener Corp.--Tapcon Masonry Hex Head, 1/4x3 1/4 L, Pk100 w/drill bit Factory sealed box.

This lot is for 190 TW Ramset Tapcon Masonry fastening Anchors . they are 3/16" by 1 3/4" hex head screws . They have the corrosion resistant coating.

1-1/4" size 3/16 Diameter Slotted hex head Recommend using a concrete drill bit for pre-drilling holes Meets all building codes, excellent pullout and shear strength. OPEN PACKAGE. PLEASE SEE AND ZOOM IN THE PICTURES FOR MORE DETAILS.