taper drill bit for sale, brand-new and used.

Pk of 10 Hertel #43482199 Screw Machine Drill Bits 1/16" x 1-5/8" Long ~ Screw Machine Length Drill Bits Drill Bit Size (Inch): 1/16 Drill Bit Material: Cobalt Drill Bit Finish/Coating: Oxide/Gold Flute Length x Diameter Ratio: 3xD (( Location Location18))

This auction is for a lot of 16 rare drill bits in great condition. They are listed as follows:Cleforge 1 1/8" 12" lengthA.I.M. Inc.

Up for sale here is a Chicago Latrobe 43/64" HSS Drill Bit Morse Taper #2 Shank MT2 2MT. Chicago Latrobe 43/64" HSS Drill Bit Morse Taper #2 Shank MT2 2MT. Looks like it was used to drill brass, flutes are still sharp.

Holds 12 drill bits. No drills included. The pockets are tapered for alignment.

Holds 11 drill bits. No drills included. The pockets are tapered for alignment.

53/64" ETNA drill by with Morse #2

Just a quick note if you are not familiar with core drills, the tip does not come to a point like it does on standard 2 flute drills, core drills typically have 3 or 4 flutes, you will need to drill a pilot hole first before you use this drill. Item ...................... Morse Taper Shank Twist Drill Bit Manufacturer ......

11/16 INCH DRILL DIAMETER; 9-1/4 INCH OVERALL LENGTH; 5-3/8 INCH FLUTE LENGTH; TAPER SHANK TYPE; MT2 SHANK SIZE; 118 DEG POINT ANGLE; CARBIDE TIPPED MATERIAL

1-31/32 TAPER SHANK DRILL 4MT 17-1/2" OAL (box is beat up -- drill bit is in perfect condition)

Three Precision Twist Cobalt Drill #26 Taper Length Drill

Two Precision Twist HSS Drill #38 (Wire) Bright Finish Taper Length Drill

NEW!! Cleveland 37/64" Taper Shank Drill Bit. Specifications include: .5781" decimal equivelent, #2 Morse Taper, 4 7/8" flute length, 8 3/4" overall length, 135 degree drill point angle, and oxide finish.

New drill bit used in drilling bowling balls. Size 59/64

Up for sale here is a NOS Hannibal Tool Carbide Tipped Taper Length Drill Bit 1/4" Straight Shank USA. These drill bits are unused shelf spares, they may have cosmetic defects due to prior storage conditions. They are all in individual plastic tubes and most have tips covered in tool cote, the carbide tips are all unused and undamaged.

Up for sale here is a NOS Precision Twist Drill Carbide Tipped Taper Length Drill Bit 1/2" Straight Shank USA Gr.D555. PTD Stock No. 35532.

New drill bits used to drill bowling balls. Size 1 3/64

UP FOR SALE IS A: LOT OF (3) "NATIONAL" HIGH SPEED TAPER SHANK DRILL BITS 11/16" 1/2" 7/16" by NATIONAL Made in the USA ~ In Good Used Working Condition ~

Holds 44 #2 Morse Taper drill bits. 6" Deep 12-3/4" Wide The pockets are tapered for alignment.A #2 Morse Taper measures approximately .700 large end to .572 small end. Made from PVC with MDF legs.

Holds 48 MT1 drill bits. 6" Deep 12-3/4" Wide The pockets are tapered for alignment. #1 Morse Tapers measure approximately .475 large end & .369 small end.