+ Post new Ad
Taper Tap Pipe Thread 15/16 - 12 (item #9), US $9.49 – Picture 0
Taper Tap Pipe Thread 15/16 - 12 (item #9), US $9.49 – Picture 0

Taper Tap Pipe Thread 15/16 - 12 (item #9)

US $9.49

  • Orangevale, California, United States
  • Jan 30th
Open on mobile:
QR code
Taper Tap Pipe Thread 15/16 - 12   (item #9) Condition: Good condition, resharpened. Please view ALL BELOW All photos for condition and items included.   PLEASE VIEW PHOTOS BELOW FOR MORE CONDITION DETAIL.  Shipping weight approximately 2 pounds We can combine shipping for multiple item purchases, if possible. Most items shipped USPS Parcel Post rates. Delivery takes 2-9 business days, sometimes longer depending on package and delivery location. PLEASE UNDERSTAND I HAVE NO CONTROL OVER DELIVERY TIME OF PARCEL POST PACKAGES. PACKAGES ARE SHIPPED FROM THE WEST COAST AND MAY TAKE MORE THAN 9 DAYS TO REACH EAST COAST. PLEASE TAKE THIS IN Consideration WHEN LEAVING SHIPPING TIME FEEDBACK. UPON REQUEST faster delivery services are available, will only charge actual cost. We make every attempt to describe the items as accurately as possible, but we may make an occasional mistake. If, for any reason, you are not satisfied with your purchase PLEASE contact us and give us an opportunity to resolve the issue before leaving any negative feedback.        
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “Good condition, resharpened. Please view ALL BELOW All photos for condition and items included.”

Directions

Similar products from Taper Pipe Taps

M24x1.5 Metric HSS Spiral Point Tap, ANSI, Ground, 3 Flute, D6, #SPT-24M-150

M24x1.5 Metric HSS Spiral Point Tap, ANSI, Ground, 3 Flute, D6, #SPT-24M-150

  • Richmond Hill, Ontario, Canada
  • Jan 30th
5/8-11 Tap GH7 Thread Form CROME Bottom tap New England Tap HSS USA – NEW –N50

5/8-11 Tap GH7 Thread Form CROME Bottom tap New England Tap HSS USA – NEW –N50

  • Cleveland, Ohio, United States
  • Jan 30th
1/4”-18 NPT 4 flute Pipe Tap Cast Iron Brubaker Tool HSS USA – NEW -T28

1/4”-18 NPT 4 flute Pipe Tap Cast Iron Brubaker Tool HSS USA – NEW -T28

  • Cleveland, Ohio, United States
  • Jan 30th
1/4”-18 NPT Plug Fluteless form New England Tap HSS USA – NEW -T27A

1/4”-18 NPT Plug Fluteless form New England Tap HSS USA – NEW -T27A

  • Cleveland, Ohio, United States
  • Jan 30th
PIPE TAP 1/2"-14 NPT 4 FLUTE Cromclad HSS USA - 1 pc - –N38

PIPE TAP 1/2"-14 NPT 4 FLUTE Cromclad HSS USA - 1 pc - –N38

  • Cleveland, Ohio, United States
  • Jan 30th
1/4”-18 NPTF DRYSEAL 4 flute Pipe Tap Interrupted Brubaker Tool HSS USA - T31

1/4”-18 NPTF DRYSEAL 4 flute Pipe Tap Interrupted Brubaker Tool HSS USA - T31

  • Cleveland, Ohio, United States
  • Jan 30th
1/4”-18 NPT Plug Fluteless Form CROMCLAD New England Tap HSS USA – NEW -T27B

1/4”-18 NPT Plug Fluteless Form CROMCLAD New England Tap HSS USA – NEW -T27B

  • Cleveland, Ohio, United States
  • Jan 30th
1/2"-14 NPT 4 FLUTE HSS USA BRUBAKER TOOL PIPE TAP NEW – T12

1/2"-14 NPT 4 FLUTE HSS USA BRUBAKER TOOL PIPE TAP NEW – T12

  • Cleveland, Ohio, United States
  • Jan 30th
Vermont Tap 2" - 4 1/2" NC 14

Vermont Tap 2" - 4 1/2" NC 14

  • Orangevale, California, United States
  • Jan 30th
Taper Tap Pipe Thread Hanson Whitney 15/16 - 12 NF (item #7)

Taper Tap Pipe Thread Hanson Whitney 15/16 - 12 NF (item #7)

  • Orangevale, California, United States
  • Jan 30th
Machinists 12/5B BUY NOW BUY NOW USA Besley Rare 3/8-18 NPSF Pipe Tap11/02

Machinists 12/5B BUY NOW BUY NOW USA Besley Rare 3/8-18 NPSF Pipe Tap11/02

  • Lutz, Florida, United States
  • Jan 30th
ACE PIPE TAP 1/2 - 14 NPT PIPE TAP USA MADE

ACE PIPE TAP 1/2 - 14 NPT PIPE TAP USA MADE

  • Hesperia, California, United States
  • Jan 30th
HEAVY DUTY 2-1/2" PIPE TAP NPT

HEAVY DUTY 2-1/2" PIPE TAP NPT

  • Beaver Falls, Pennsylvania, United States
  • Jan 30th
3/8-18 HSS-Reg Pipe Tap ICS Cutting Tools 4 Fluted

3/8-18 HSS-Reg Pipe Tap ICS Cutting Tools 4 Fluted

  • Lake, Michigan, United States
  • Jan 30th
Pipe plug gages Male gauges Thread Group #3

Pipe plug gages Male gauges Thread Group #3

  • Fond du Lac, Wisconsin, United States
  • Jan 30th
Pipe plug gages Male gauges Thread Group #5

Pipe plug gages Male gauges Thread Group #5

  • Fond du Lac, Wisconsin, United States
  • Jan 30th
M20x2.5 Metric HSS Spiral Point Tap, ANSI, Ground, 3 Flute, D7, #SPT-20M-250

M20x2.5 Metric HSS Spiral Point Tap, ANSI, Ground, 3 Flute, D7, #SPT-20M-250

  • Richmond Hill, Ontario, Canada
  • Jan 30th
1 Pc M16x2.0 Metric Hss Spiral Point Taps, 3 Flute, D7, #SPT-16M-200

1 Pc M16x2.0 Metric Hss Spiral Point Taps, 3 Flute, D7, #SPT-16M-200

  • Richmond Hill, Ontario, Canada
  • Jan 30th
1-1/2 - 11-1/2 HSS(M2) NPT Taper Pipe Tap, 7 Flutes, ANSI, Ground, #NPT-1-12

1-1/2 - 11-1/2 HSS(M2) NPT Taper Pipe Tap, 7 Flutes, ANSI, Ground, #NPT-1-12

  • Richmond Hill, Ontario, Canada
  • Jan 30th
M18x1.5 Metric HSS Spiral Point Tap, ANSI, Ground, 3 Flute, D6, #SPT-18M-150

M18x1.5 Metric HSS Spiral Point Tap, ANSI, Ground, 3 Flute, D6, #SPT-18M-150

  • Richmond Hill, Ontario, Canada
  • Jan 30th

People who viewed this item also vieved

Guhring M8 x 1.25 6H Carbide cut tap

Guhring M8 x 1.25 6H Carbide cut tap

  • Linden, Michigan, United States
  • May 27th
NEW! Bendix High Speed Steel (1/4"-18 Pitch) NPS 4 Flutes Special Tap

NEW! Bendix High Speed Steel (1/4"-18 Pitch) NPS 4 Flutes Special Tap

  • Roseburg, Oregon, United States
  • May 27th
OSG Spiral Flute Taps 1/2-20 GH3 4FL HSS S/O UNF S108 8018401 QTY 5

OSG Spiral Flute Taps 1/2-20 GH3 4FL HSS S/O UNF S108 8018401 QTY 5

  • Westerly, Rhode Island, United States
  • May 27th
WIDIA - 1/2 20 NF H3 TAP SET (3pcs)

WIDIA - 1/2 20 NF H3 TAP SET (3pcs)

  • Summit-Argo, Illinois, United States
  • May 27th
Lot 1pcs HSS Machine Plug Taps 3/4-12 TPI Tap Threading Tools Cheaper

Lot 1pcs HSS Machine Plug Taps 3/4-12 TPI Tap Threading Tools Cheaper

  • CN, China
  • May 27th
tap holder

tap holder

  • Oswegatchie, New York, United States
  • May 28th
NES1300 EXTERNAL THREAD REPAIR SET 5/32" -6.0" FOR LARGE AUTOMOTIVE & INDUSTRIAL

NES1300 EXTERNAL THREAD REPAIR SET 5/32" -6.0" FOR LARGE AUTOMOTIVE & INDUSTRIAL

  • DELHI, DELHI, India
  • May 28th
SUPER LOT: METRIC HAND TAP M1.6 X 0.35 Made in USSR. 200 pieces. NEW !!!

SUPER LOT: METRIC HAND TAP M1.6 X 0.35 Made in USSR. 200 pieces. NEW !!!

  • Lugansk, default, Ukraine
  • May 28th
METRIC HAND TAP M2 X 0.4 USSR. Set of 2 pieces. NEW !!! 100 sets

METRIC HAND TAP M2 X 0.4 USSR. Set of 2 pieces. NEW !!! 100 sets

  • Lugansk, default, Ukraine
  • May 28th
9/16" 18 NF Threading die. GTD made in USA. Machinist gunsmith.

9/16" 18 NF Threading die. GTD made in USA. Machinist gunsmith.

  • Fort Lauderdale, Florida, United States
  • May 29th
*VINTAGE* Tap And Die Set 20/40 Piece Cobra Professional Tools In Case

*VINTAGE* Tap And Die Set 20/40 Piece Cobra Professional Tools In Case

  • Brigham City, Utah, United States
  • May 30th
VINTAGE 40 PIECE RAM TOOLS TAP AND DIE SET NEVER USED VERY NICE DEAL!!!!!!!!!!

VINTAGE 40 PIECE RAM TOOLS TAP AND DIE SET NEVER USED VERY NICE DEAL!!!!!!!!!!

  • Greenville, Pennsylvania, United States
  • May 30th
VINTAGE LOT OF 15 PIPE THREAD DIES

VINTAGE LOT OF 15 PIPE THREAD DIES

  • Plymouth, Massachusetts, United States
  • May 30th
VINTAGE LOT OF 10 PIPE THREAD DIES #2

VINTAGE LOT OF 10 PIPE THREAD DIES #2

  • Plymouth, Massachusetts, United States
  • May 30th
VINTAGE LOT OF 10 PIPE THREAD DIES

VINTAGE LOT OF 10 PIPE THREAD DIES

  • Plymouth, Massachusetts, United States
  • May 30th
New 3pc Union Butterfield 1/4-28 NF HS Hand Tap set-- PL-TA- BO-- USA MADE

New 3pc Union Butterfield 1/4-28 NF HS Hand Tap set-- PL-TA- BO-- USA MADE

  • Pensacola, Florida, United States
  • Jun 8th
New 3pc GREENFIELD 1/4-28 NF HS Hand Tap set-- PL-TA- BO--- MADE IN USA

New 3pc GREENFIELD 1/4-28 NF HS Hand Tap set-- PL-TA- BO--- MADE IN USA

  • Pensacola, Florida, United States
  • Jun 8th
OSG 1/2-13 HY-PRO Spiral Tap

OSG 1/2-13 HY-PRO Spiral Tap

  • Parker, Colorado, United States
  • Jun 8th
WIDIA GTD VARIOUS TAPS , , 38 DIFFERENT STYLES HUGE LOT OF 540+ PIECES ALL NEW

WIDIA GTD VARIOUS TAPS , , 38 DIFFERENT STYLES HUGE LOT OF 540+ PIECES ALL NEW

  • Syracuse, New York, United States
  • Jun 8th
OSG 5/8"-18 GH3 3 FLUTE PLUG TAP #1233400

OSG 5/8"-18 GH3 3 FLUTE PLUG TAP #1233400

  • Portland, Oregon, United States
  • Jun 8th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies