tension washers for sale, brand-new and used.

Item .................... Set of 10 WASHERS per bid Manufacturer .... Original Schnorr Co.

The Lotoons Store NEW Internal Tooth Lock Washer Steel Zinc Finish 5/16" Bolt Size 0.3260" ID 0.6020" OD 0.0310" Thick Pack Of 100

Split Lock Washer, Steel, Zinc Finish, 1/2" Bolt Size, 0.5120" ID, 0.8690" OD, 0.1250" Thick, Pack Of 100

Small Parts Regular Split Lock Washer, Steel, Zinc Finish, #10 Bolt Size, 0.200" ID, 0..3730" OD, 0.047" Thick, Pack Of 100

VINTAGE GLAZED STEATITE CERAMIC HIGH VOLTAGE TENSION INSULATORS No.: 227 You are buying one Vintage Glazed Steatite Ceramic High Voltage Tension Insulator. It is made from high purity Steatite. (MgO·SiO

This unit has ONLY 48 hours of operating time and is garage kept ! Purchased entire set-up May 27, 2014 for 17000 and SERIOUS inquiries only will be accepted. ALL bill of sales, and warranties will be gladly given.

Untitled Document 5 Pcs A2 Stainless Steel Fully Threaded Rod (Size-

Untitled Document Lot of 5 - A2 Stainless Steel Threaded Bar Rod Stu

1 Grade 9 Tension Washer (Gr 9 Flat Washer) Yellow Cad Plated, Pk 5 Item Description: Tension Washer (Gr 9 Flat Washer) Size: 1 Type:

Item .................... Qty. 5 pieces of Tempered Hard tension Washers even though there is only one in the photo

Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915 and 1916, Volume 2, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2008. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-371-3.

MicroscopeNet JH25340

MicroscopeNet JH30500

Pk of 10 Wej-It #AT1223 Wedge Anchors 1/2" x 2-3/4", 1/2-13 Thread ~ (Up11A) Item Wedge Anchor Type Full Body Material Zinc Plated Carbon Steel Anchor Dia. 1/2" Anchor Length 2-3/4" Thread Size 1/2-13

Pk of 20 Wej-It #AT1413 Wedge Anchors 1/4" x 1-3/4", 1/4-20 Thread ~ (Up1B) Item Wedge Anchor Type Full Body Material Zinc Plated Carbon Steel Anchor Dia. 1/4" Anchor Length 1-3/4" Thread Size 1/4-20

Up for sale is this New Rocker Lock Gate Spring for later model and most rebuilt Kluge Letterpress, Die Cutters and Foil Stamping Presses. This part is to replace the spring that holds the rocker gate in place and allows tension to pull the gate into position to lock the Platen during impression. The Rocker Gate is inside the frame at the front of the press and has a cast steel or plastic round cam follower attached to it.