the hammer stroke for sale, brand-new and used.

DAYTON Hammer, Air, 23.7 CFM Stroke Length 2-11/16 In., Average CFM @ 15 Second Run Time 6.0, 24.0 CFM @ Full Load, Air Inlet 3/8 In., Min. Hose 3/8 In., Overall Length 14 In., Required Pressure 90 psi

5.5 HP IMPACT FORCE 10000 PERCUSSION RATE 1/MIN 450-650 JUMPING STROKE 40-65 MM

FLORIDA PNEUMATIC Medium Duty Air Hammer - Model: FP-1020 Air Inlet Size: 1/4" Blows per Minute: 3700 FP-1020 .401"MED DUTY AIRHAMMR-FLORIDA PNEUMAT

STARRETT Automatic Center Punch - Model: 818 Diameter: 5/8" Overall Length: 5" Tool Material: Tool Steel 818 5/8" AUTOMATIC CENTER PUNCH - STARRETT Applications Works on metal, plastic and other machinable mater

STARRETT Automatic Center Punch - Model: 818 Diameter: 5/8" Overall Length: 5" Tool Material: Tool Steel 818 5/8" AUTOMATIC CENTER PUNCH - STARRETT Applications •Works on metal, plastic and other machinable materials. Features •No hammer needed - just sight, then strike. •New lightweight aluminum handle for positive grip, easy handling and adjustable stroke.

Driver RHINO GPD-30 Features: Honda 4 – Stroke 35cc, Gas Powered Post Driver

Brand New 6" Rivet Buster by Chicago Pneumatic + 2 Bits Model: 4160 Length: 20 1/2" Bore: 30mm (1.1875" Stroke 153mm (6") Blows per Minute: 1100 Series: 2000 Jumbo 11X Air Inlet: 12mm (1/2") Air Consumption: 44 cfm

NEW in original packaging, was purchased from Sears MODEL 9-19905 exclusive Bias Motor Design positioning of exhaust ports in cylinder varies the power stroke to provide a maximum 600 ft-lbs in reverse and a selectable 50-400 ft-lbs (with a ma. of 450 ft-lbs) in forward Conveniently located grease fitting for easy lubricating of impact mechanism High-Output Twin Hammer design for smooth, efficient power transmission 1/2 - in Air Inlet with Minimum 3/8-in.

ITEM DESCRIPTION FESTO AV-12-4 CYLINDER. 12MM BORE 4MM STROKE. SEE PHOTOS.

HARBOR FREIGHT / CENTRAL PNEUMATIC MODEL No. 46509, AIR CHIPPING HAMMER WITH 4 CHISELS - NEW CENTRAL PNEUMATIC No. 46509 AIR CHIPPING HAMMER WITH 4 CHISELS.DESIGNED FOR BREAKING UP PIECES OF CONCRETE.RED FINISH, CAST IRON HANDLE ASSEMBLY.THUMB TRIGGER OPERATION.BLACK FINISH BARREL AND NOSE.COILED SPRING BIT RETENTION.3" PISTON STROKE.1800 BPM.90 PSI MAXIMUM OPERATING PRESSURE.22 CFM AIR CONSUMPTION.USES 0.68" DIAMETER, ROUND SHANK BITS.3/8" NPT AIR INLET.COMES WITH TWO N

You are bidding on a Completely Rebuilt Boom mounted Crust Breaker / Pavement Breaker Model: 7030 Bore: 3 3/4" Piston Stroke: 5" F

You are bidding on a Completely Rebuilt Horizontal Rock Drill by Sullair This drill is great for drilling rock and concrete walls as well as underwater wood piling work. This tool spins and hammers at the same time. Model: MRD-9

<img src="http://ti2.auctiva.com/web/aswCredit.gif" border="0"><br><a href="http://www.auctiva.com/?how=scLnk2" target="_blank"><img src="http://t

<img src="http://ti2.auctiva.com/web/a

<img src="http://ti2.auctiva.com/web/a

An Ingersoll Rand Chipping Hammer. It has a Swan neck handle and outside trigger. It has about a 3 1/2 / 3 3/4" Stroke, and the shank size is .680.

Here is a nice used Sullair MDT-30 demolition tool. Works quite nicely. No bit included.