The Scorbot Er-iii With Controller And Labtop With Software

US $4700

Souderton, Pennsylvania, United States
Jun 21st

Open on mobile:
QR code

The Scorbot ER-III is a JAR (Jointed Arm Revolute) robot which means it's movements are somewhat similar to that of the human arm. The ER III has three axes of rotation and five degrees of freedom. These degrees are illustrated through the movement of different parts which are: 1) Base- lower part of robot which rotates about the y-axis. 2) Shoulder- connects to the base by way of a joint which rotates about the x-axis. 3) Elbow- connects to the shoulder by way of a joint and also rotates about the x-axis. 4) Wrist- this portion is connected to the elbow and gives the robot its final two degrees of freedom. It is capable of rotating as a human wrist would, wrist roll. The wrist is connected by a joint along the x-axis which allows it to flex up and down as a human wrist would, wrist pitch. 5) Gripper- this is end effector attached to the wrist and is capable of opening and closing. It emulates the action of a human using his/her index finger and thumb to grasp an object. This robot is powered via an electric motor. Robot Specifications: Mechanical Structure: Vertically Articulated, 5 Axis PLUS Gripper = 6 Axis; Support for 2 additional axis (Conveyor, rotary table, etc); Controller supports simultaneous control of all 8 axis Working Envelope: Axis 1: Base Rotation 310 degrees Axis 2: Shoulder Rotation +130 Degrees / -35 Degrees Axis 3: Elbow Rotation +- 130 Degrees Axis 4: Wrist Pitch +- 130 Degrees Axis 5: Wrist Roll Unlimited Axis 6: GRIPPER Open/Close + Measurement of gripper opening Maximum Working Radius: 61mm (24.4") Gripper Opening: 75mm (3") without rubber pads - 65mm (2.56") with rubber pads Maximum Work Load: 1kg (2.2 Lb) Transmission: Gears, Timing Belts and Lead Screw Actuators: 6 DC Servo Motors with Closed-Loop Servo Control Feedback: Optical Encoders on All Axis Hard Home: Fixed Reference Position on all Axes Repeatability: +- .05mm (+- 0.02") Maximum Speed: 330mm/Sec. (13"/Sec) Weight: Robot Arm: 11kg (24 Lb) - Controller: 5kg (11 Lb) Scorbot Controller software Windows base software with a nice user interface make it easy to program your Scorbot ERIII robot and get it up running in a few minute. You will receive: -14" used laptop (could be different brand), with WinXP ,WinVista or Win7. -Scorbot ERIII controller/Programmer software installed on the laptop. -Laptop AC power adapter. -RS232 Serial cable for connection.