threaded collet for sale, brand-new and used.

3C Air Collet Chuck Fixture Tested, works great Has threaded coolant hole in side Includes pneumatic switch

CUSHMAN MODEL 215 COLLET CHUCK, FLAT BACK. 1/8" TO 1-1/2" CAPACITY INCLUDES: D1-6 ADAPTER PLATE. CAN ALSO BE USED ON A1-6 WITH REMOVAL OF CAMLOCK PINS.

Balas Collet Chuck with Collets 3/4 ” shank with flat and 7/16-14 tpi threaded hole Includes; 5 collets, 1/16”, 11/64”, 7/32”, 5/16”, and 3/8” Marked BALAS S6-3”-C3-1 Overall length with nut 4-1/8”

For sale is a Jacobs AD50-82 threaded adapter to allow the use of the Jacobs Model 50 collet chuck on lathes or mills with 2-1/4"-8 tpi threaded spindles. This is used, as can be seen in the photos. The holes in the periphery of the chuck that take a tommy bar to loosen the chuck from the spindle show wear.

New Collet Chucks Precision ER11 Extension Rod Toolholder CNC Mill Specific

For Sale: Hardinge Collet Indexing fixture. HV-4N 5C Model In great condition.

SOWA TOOL&MACHINE GS Premium Balanced ER Collet Chuck RANGE .118" - 1.023" ?Limited Supply & New Lower Price. Features

Collis Collet Chuck NMTB # 50 Series TG 150 & Wrench USA A = 2-27/32" Projection B = 7-27/32" Overall C = 3-1/4" Diameter * Holders have threaded thru holes for a back up screw. * Includes Spanner Nut And Spanner W

HSK63A Collet Chuck ER50 by 4.72 Balanced to 25K RPM G2.5 TMX-Toolmex Item #3-305-6501 Shank 63A Collet Size D ER50 L in 4.72 Clamping Range in .250-1.338 Taper ground to AT3 standards or better Nickel plated for longevity .0002” TIR or better to ensure minimal run-out Threaded through hole for stop screws Wrench not included. Made In China Image is a stock photo and may not represent actual item.

5C COLLET STOP MADE FROM STAINLESS STEEL 3.635 INCH LONG,THREADED ROD AND NUT.

Up for AUCTION is the following item 1 - 9 1/4" long Collet holder threaded . Item is in excellent condition . Machinist Tool .

3/4" Hardinge HPS-5465-A Extended nose collet used. Has some normal surface rust. Internally threaded.

Home | All Listings | About Us |

I got this with a logan lathe. From the edge of the sleeve to the end of the tube is 11-1/8". The thread protector is threaded 1-1/2"-8

Here is a gently used 5C 7/16 Hardinge hex collet it is threaded inside and out. don't know what else to say about it if you have questions please ask if I don't know I will find out !!!! no reserve !!!!