threaded end for sale, brand-new and used.

Genuine U.S. Military Issue Surplus Lot of 5 Brass Threaded Elbow Fittings with Steel Adapters The elbow goes from male to female. The elbow's male end is 3/8" diameter threaded 3/16" inner diameter.

Hello, you are looking at 7 sleeves and couplers that will ATTACH to your SCOPE and adapt it to fit many different manufacturers' light cables. They will allow you to accommodate your scope to attach almost any standard light cable. These fittings don't attach directly to your light cables, they attach to your specific brand of scope.

Genuine U.S. Military Issue Surplus Propper Mfg. Co.

Camco 55501 PowerGrip 25' Cord with 30 AMP Male Standard/30 AMP Female Locking Adapter

New Page 1

New Brass

Lot of 20 NEW PVC Schedule 40 cap features a female NPT threaded connection to fit over the end of a pipe to create a seal.

New! Never Used! 3" ball valve.

The Wedge-All® wedge anchors are a non-bottom bearing, wedge-style expansionanchor for use in solid concrete or grout-filled concrete masonry. A one-piece clipensures uniform holding capacity that increases as tension is applied. The threadedstud version is available in eight diameters and multiple lengths.

Replacement Survey Tripod Threaded Bolt and Swing Arm NAME BRAND TRIPODS ONLY - We do not know if this will fit in a Chinese knock-off Don't use a bolt from the hardware store, they can be over-tightened or be threaded in too far causing damage to your costly instrument. Fits CST Berger, Bosch and David White tripods, if your unit resembles the ones seen in the boxes with a small hole than they will fit, smooth bore shaft is 3/4 of an inch in length. Threaded b

Replacement Survey Tripod Threaded Bolt ONLY NAME BRAND TRIPODS ONLY - We do not know if this will fit in a Chinese knock-off Don't use a bolt from the hardware store, they can be over-tightened or be threaded in too far causing damage to your costly instrument. Fits CST Berger, Bosch, David White, SitePro, SECO and Sokkia tripods, if your unit resembles the ones seen in the boxes with a small hole than they will fit, smooth bore shaft is 3/4 of an inch in length. Threaded b

Used ZEPHYR 45* degree angle aircraft flexible snake drill attachment. Uses standard 1/4-28 threaded drill bits. Attach one end to your drill and use this to reach those hard to get to spots!  Works as it should.

Handle ONLY! Threaded pin punch handle made from billet brass and designed exclusively for aircraft sheetmetal techs with access to 1/4-28 threaded drill bits. With this handle, simply take any 1/4-28 threaded drill bit, cut off the fluted portion and your in business.

MAGNETIC PICK UP MSP6729 ROTATE SPEED SENSOR GENERATOR PARTS

NEW Marshalltown Narrow Threaded/Clevis Handle Adapter. Modifies threaded handle into a clevis end. Designed for use with standard broom threaded magnesium handle sections.