threaded flanges for sale, brand-new and used.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes fro1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These are turned, and tapered on the threads for EXTREME accuracy, and the threads are tapered on the end with the lathe, and are spot faced on the end for 3/4" decals, which are High Quality, and U.V resistant, polymer domed. These will ship in a 3X3X2 inch, tuck top box.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These are turned, and tapered on the threads for EXTREME accuracy, and the threads are tapered on the end with the lathe, and are spot faced on the end for 3/4" decals, which are High Quality, and U.V resistant, polymer domed. These will ship in a 3X3X2 inch, tuck top box.

UP FOR AUCTION IS A BRAND NEW LASCO PVC UNION THREADED BOTH ENDS 1 1/2" PIPE SIZE SCHEDULE 80. Choose threaded fittings for quick connections without the need for primer and cement. Also known as Schedule 80 fittings and flanges, they have thicker walls than the standard-wall versions to handle heavy duty applications.

Lasco Brand Threaded Flange 852-040 Schedule 80, Class 150 Pipe flanges Threaded Flange Size: 4-inch Schedule 80 PVCs are thicker, stronger, will handle higher pressures, and endure colder climates than Schedule 40 PVCs Schedule 80 PVCs: not for Compressed Air or Gas; conforms to ASTM D 1785; fittings conform to ASTM D 2467; threaded fittings conform to ASTM D 2464

9BF1L5A0 - Goulds Pumps 3656 S Centrifugal Pump 10 HP - 208-230/460 Volt - 3 Phase - 3500 TEFC - 8-1/16 Trim Pump Size: 1 x 2 x 8 Threaded The 3656 S-Group pumps from Goulds have been designed with technical benefits to meet the needs of users in a variety of water supply, recirculation, and cooling applications. FEATURES The model 3656 offers close coupled design for space saving and simplified maintenance. Back pull-out to reduce maintenance down time.

3M™ Neoprene Rubber And Gasket Adhesive 2141 is a light yellow, high strength, solvent type synthetic rubber-based brushable adhesive Easily brushable Excellent water resistance

Here for your consideration are two Hytor(division of Schrader Bellows) Pneumatic Cylinders, removed out of service in very good used condition, accomodations on either end through rod nuts to bolt flanges on head and rod end through the female threads on tie-rod retaining nuts. Other features are 20mm (.788) rod diameter, 5/8-18 threaded rod and front and rear adjustable cushions.

Caddy 6TA24 H-Ti/T Rod to Flange Clip - 237 Pcs Features Suspends threaded rod from beam flanges Threaded rod hanger can swivel to provide a vertical dropdown Requires only a hammer to install Retails $121.40 per 100

RADIO FREQUENCY SYSTEMS, INC.CABLEWAVE SYSTEMS DIVISIONCONN FLC78-50S TCCP/N 728846 (from about 1992-1994 This is a cable splice kit for high frequency coaxial cable. Used for communication cable to the tower antenna. Catalog lists - C

The M5600 is one of our best-selling full sized float switch and is in stock for same day float switch ordering. The M5600 series stainless steel float switch is designed specifically for liquid level sensing in demanding fluid level sensor applications. This durable stainless steel float switch is the perfect sensor for a wide range of liquids, from high purity to high temperature or high pressure corrosive liquids.

Here we have a new hazardous area Hand-Off-Auto control station. Made by Killark, catalog number 8040/11. This has a stainless steel enclosure that measures approximately 4" wide and 6" tall.

Electric Motors : Explosion Proof : Three-Phase : Explosion Proof - NEMA Premium