threaded pin for sale, brand-new and used.

Shop Search

YOU ARE BIDDING ON A VINTAGE BRASS AND GLASS OILER LUBRICATR THAT IS GOOD CONDITION AS SEEN. I DONT KNOW IF IT WORKS SO LISTING AS PARTS. I DID UNSCREW CAP AND A PIECE CAME OUT THAT LOOKED LIKE A STYLUS OR NARRO PIN.

The perfect jumper hose for craft beer home brewers looking to connect from a keg to a jockey box. This jumper is good for connections to beer threaded shanks, and male flare keg disconnects. Works with beer and wine kegs.

Disconnects (Set of 2) for IN (Gas) and OUT (Liquid) Pin Lock 1/4" MFL! Kegconnection Product Number is: DC403 This is a set of disconnects for both IN (Gas) and OUT(liquid) posts on a Cornelius style Pin Lock keg(Coke.) These Connectors have a 1/4" MFL (threaded) Connection. In order t

KINEMATIC CYLINDRICAL BOSS MOUNTED VEE BLOCK, 0.750" CYLINDRICAL POST MOUNTED This kinematic Vee Block component (also known as Cylindrical Boss Mounted Vee Block ) is designed for both high load carrying capacity and easy installation. Because the contact area between a sphere and the precision ground flat surfaces of the Vee block is greater than that between a sphere and two cylinders, this Vee block has a much higher load carrying capacity.

Cartridge Globe Valve Actuator are small electric actuators for individual room control that provide floating or modulating control of V5852, V5862 two-way or V5853, V5863 three-way valvesCartridge Globe Valve Actuator are small electric actuators for individual room control that provide floating or modulating control of V5852, V5862 two-way or V5853, V5863 three-way valves USED but completely functional, was removed during a recent upgrade.

TL2-160-9 (cyrillic ТЛ2-160-9) silicone diffused type p-n-p-n avalanche thyristor with enhanced overvoltage endurance.Designed for use in DC and AC circuits with frequency up to 500 Hz of electric power converters and other high power units like electric actuators for industry and transport, fully and semi controlled rectifying bridges, AC regulators etc.Produced in cermet bolt construction body with M20 threaded Anode pin and flexible Cathode and Gate terminals.Made in USSR.

Scaffold Ratchet Wrench With 6 Points 7/8" Socket Offered by Rock Bottom Pricing, Inc. TOOL LIQUIDATORS Offered for sale is a Scaffold Ratchet Wrench With 6 Points 7/8" Socket Sockets attached with a hex round head threaded pin Allow socket replacement Handle has a hole for strap to be attached (Not included) Heavily chromed plated and extremely rugged 8.5 inches long This item is 100% Brand NEW!! Please view our other great store items.

Dell - 3 Track Mini USB Magnetic Stripe Swipe Credit Card Reader - DEL3331-33UB Pulled Working *** Fully Functional & Tested ***

Box Style 2*18650 Mechanical Modwood + st

Original Soviet Military 24 pin connectors Brand new.

HOLDER - HOLSTER - SCABBARD....................CALL IT WHAT YOU WANT......... BUT NOW WITH THIS DEVICE, YOU WILL ALWAYS KNOW WHERE YOUR MITER IS. This neat little item attaches to the underside of your Unisaw table and stores your miter conveniently, safely, and close at hand, but totally out of the way.

THOMAS & BETTS RUSSELLSTOLL 3933 3-WIRE PIN & SLEEVE RECEPTACLE THESE RECEPTACLES ARE USED & IN PERFECT CONDITION 20 AMP @ 600 VAC 30 AMP @ 250 VAC 3 WIRE (4) OF THE RECEPTACLES HAVE 1/

Yellow Turck Euro Fast cable. One end is an externally threaded 4 pin male conector, the other is an internally threaded female connector. RK 4.4T-10-RS 4.4T/S1587-T Turck M12 eurofast Cordset Straight, Female connector, Standard plug body, Nickel plated brass, coupling nut, 4 Wire, T barb, 10 Meters, Straight, Standard Plug Body, 4 Wire, T barb, TPE, weldlife (U-49349) RK44T10RS44TS1587T

NorTrac Heavy-Duty Welded Cylinder-3000 PSI 2in Bore 24in Stroke #992207 Northern Tool Item# 992207 Item Weight: 30.85 lb(s) Product Information: This heavy-duty NorTrac® Welded Cylinder delivers the power of a tie-rod cylinder in a compact, long-lasting design that handles continuous loads of 3000 PSI. This feature-filled cylinder sports a gr