threaded shaft for sale, brand-new and used.

304242 12" nut travel, acme leadscrew kit 1/2-10 thread, single start, right hand No End Machining required Includes: 12" travel acme threaded rod ( 14.75 long), low carbon steel, oil finish 2 pieces, 1/2 ID flanged bearings, 5/16 width, 1 1/8 mounting bore, flange is .072w x 1.265 dia Threaded Shaft Clamp preloads bearings and prevents end play.

304240 6" nut travel, acme leadscrew kit 1/2-10 thread, single start, right hand No End Machining required Includes: 6" travel acme threaded rod ( 8.75 long), low carbon steel, oil finish 2 pieces, 1/2 ID flanged bearings, 5/16 width, 1 1/8 mounting bore, flange is .072w x 1.265 dia Threaded Shaft Clamp preloads bearings and prevents end play.

The shaft package for Ondrive PF30-xxANM or Rino 0D03454, including: 1. Precision 303 Stainless Steel Shaft.---Dia. 8mm ( 37mm long) with additional 1/4" long 20 TPI Threaded ( Dia.

The shaft package for Ondrive PF30-xxANM or Rino 0D03454, including: 1. Precision 303 Stainless Steel Shaft.---Dia. 8mm ( 34mm long) with additional 1/4" long 20 TPI Threaded ( Dia.

var itemNumber = window.ebayItemID ?

var loadingImages = new Array();function autoSizeImage(src, tagName, maxSize) {if (document.images){if (loadingImages[src.toString().toLowerCase()] == null) {loadingImages[src.toString().toLowerCase()] = new Image(); loadingImages[src.toString().toLowerCase()].src = src;} if((loadingImages[src.toString().toLowerCase()].width maxSize)){if (aspectRatio > 1.0) {aspect

Good shape. 4" lathe chuck with 3 self-centering jaws. Square key.

National Refrigeration Products NRP5421 Motor. 208-230V AC, 50/60Hz, 1550 RPM. Cast iron.

3/4" ARBOR HOLE - RIGHT HAND SPINDLE 1/2" STRAIGHT SHAFT- 3/4" ARBOR HOLE - THREADED SHAFT SIZE 1/2"

3/4" ARBOR HOLE - LEFT HAND SPINDLE - 1/2" STRAIGHT SHAFT ARBOR HOLE size is 3/4" - THREADED SHAFT SIZE 1/2"-

This is for a NOS new old stock GE AC Motor. Exactly as show in the pictures with bracket and two red leads. Slotted shaft.

Lot of 100+ NEW AIRPOT CORP - 62820-2 - Dashpot. Adjustable air dashpot. Glass 0.74" OD with 2" long shaft with swivel attachment at both ends.

NEW 3D printer Smooth & Threaded Rods + Nuts Kit rework shaft Reprap Prusa i3 etc..

NEW 3D printer Smooth & Threaded Rods + Nuts Kit rework shaft Reprap Prusa i3 etc..

For sale is a threaded adjustable I-beam anchor/clamp. This was used in my garage to attach an i-beam to my truss for an i-beam trolley. Approximate measurements: 28" long, shaft 15/16" diameter, clamp opening 1 1/8" wide x 2 15/16" long.

Replacement Survey Tripod Threaded Bolt and Swing Arm NAME BRAND TRIPODS ONLY - We do not know if this will fit in a Chinese knock-off Don't use a bolt from the hardware store, they can be over-tightened or be threaded in too far causing damage to your costly instrument. Fits CST Berger, Bosch and David White tripods, if your unit resembles the ones seen in the boxes with a small hole than they will fit, smooth bore shaft is 3/4 of an inch in length. Threaded b

Replacement Survey Tripod Threaded Bolt ONLY NAME BRAND TRIPODS ONLY - We do not know if this will fit in a Chinese knock-off Don't use a bolt from the hardware store, they can be over-tightened or be threaded in too far causing damage to your costly instrument. Fits CST Berger, Bosch, David White, SitePro, SECO and Sokkia tripods, if your unit resembles the ones seen in the boxes with a small hole than they will fit, smooth bore shaft is 3/4 of an inch in length. Threaded b