Milwaukee Magnetic Tape Measures are Nothing But Heavy Duty. Using Nylon Blade Protection and a 5-Point Reinforced Frame, they offer up to 10X Longer Blade Life, by resisting contamination wear and increasing protection when dropped. To increase productivity on the jobsite, Milwaukee Magnetic Tapes feature a new-to-world Dual Magnets, which securely attaches to EMT sticks from below and steel studs in front.
Five brand new heavy duty replacement punches for your hydraulic knockout punch set. Punches have three cutting edges, work on mild steel up to 11 gauge and stainless steel up to 16 gauge. Just like Greenlee, but for a lot less $$$.
Included with this power nailer are the carrying case, the manufacturer's DX 36M Operating Instructions, one spare piston, two brushes, one rubber stabilizer, and one box of 100X-ZF 62 P8 nails. Note: This is a powerful tool and it is the buyer's responsibility to follow all the safety guidelines. (See Operating Instructions)
Everything in picture shown! 2 boxes of charges and about 100 concrete pins free with your order! The Hilti DX-460 is used to fasten bird netting hardware
Hilti DX351 Powder Actuated Tool BRAND NEW w/ MX27 Nail Magazine The tool is designed for professional use in fastening applications where specially-designed nails, threaded studs and compo site fasteners are driven into concrete, steel and sand-lime block masonry. The tool works on the well-proven piston principle and is therefore not related to high-velocity tools. The piston principle provides an optimum of working and fastening safety.
Silicone vibration mounts, Qty=12 These mounts were used to mount a small air pump in an R&D machine. The mounts are stainless steel threaded studs, with super soft silicone cast between the halves. There are 12 of them, (3) are 1/2" tall, and (9) are 3/4" tall.
Here we have a used General Electric current transformer and ammeter. This unit was removed from a piece of industrial switchgear that we dismantled. It was in working condition when it was taken out of service.
Hobart Heat Seal 1743T-1Turbo Tunnel Shrink Wrapping Oven 220V This is a used stainless steel Hobart Heat Seal 1743T-1 Turbo Tunnel Shrink Wrapping Oven which operates with 220V power. It can be hardwired as that is what it is currently or it can be plugged into an outlet with plug addition. The openings at each end are 8.5" tall x 16.5" wide It has (6) variable speeds and temperature controls for both sides of the track for customization.
Klein Tools PND91610 9/16 Power Nut Driver, 10-Inch Out-of-Chuck Product Features 1/4 Hex quick connect with wrench assist Impact rated for the most aggressive power tools Made in the USA Product Description Hollow shaft magnetic nut driver for long bolts, studs or threaded rod. Klein Tools was founded in the USA in 1857. We
This package of 100 6-32 (by 1 inch long) full-threaded steel studs was bought by me 3 or 4 years ago at McMaster-Carr, but never even opened. The McMaster-Carr p/n is 91565A828. Save yourself some dollars by purchasing these from me (if you need them of course!).
Picture is actual Item count will be adjusted to 75 PCs. PEM FH-440-8ZI Self-Clinching Threaded Studs Thread Size .112-40 (#4-40) Thread Specification External, ANSI B1.1, 2A Length (±.015) .500 in Head OD (±.015) .176 in Min. Sheet Thickness .040 in Hole Size in Sheet (+.003/-.000) .111 in Max.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.