Toold for Grinding Machines (Tools for Specific Machines) for sale, page 102

Cincinnati #2 tool and cutter grinder workhead, both centers and wheel guards

Graham, North Carolina, United States
Mar 3rd

Cincinnati #2 tool and cutter grinder workhead and wheel guards. also other accessories that are pictured. it takes 50 taper holders.

Dumore corp 8571-210 series - 10 hand grinder 2008

Auburn Hills, Michigan, United States
Mar 3rd

Dumore Corporation Hand GrinderModel # 8571-210Series; 210RPM; 22,000HP: 1/10Voltage; 115V 1.2 AMPSYear; 2008 I have qty. 4 hand grinders in the case that are in all very good shape. All 4 units will be sold in a as is where is sale.

Lot machinist atlas lathe post spanner wrenches armstrong machinist tooling

Omaha, Nebraska, United States
Mar 3rd

VINTAGE LATHE TOOLS Very well preserved collection of high quality specialty lathe and machinist tools. These were hobbyist owned so a few of these appear to be lightly or unused.

Rockwell 23-505 carbide tool grinder 6" double wheel reversing 1/2hp 115v

Middlebury, Indiana, United States
Mar 3rd

Doall cylindrical grinding and indexing attachment, 6.5" x 7.5" capacity, collet

Hopkins, Minnesota, United States
Mar 3rd

var itemNumber = window.ebayItemID ?

Setco carbide tool grinder, model spl, 10" wheel, tilting table, 1hp motor

Hopkins, Minnesota, United States
Mar 3rd

var itemNumber = window.ebayItemID ?

Lufkin depth mics. and precision square

Gallatin, Tennessee, United States
Mar 3rd

Lufkin 0-1 Depth Mics. and Lufkin precision solid square Both are in used condition but still work as they should.

Fleetwood drill grinding attachment

Anaheim, California, United States
Mar 3rd

FLEETWOOD DRILL GRINDING ATTACHMENT For use with drills from 1/8" (3mm) to 3/4" (18mm) It is adjustable for drill

Darex e90 endmill sharpener e-90

Taylor, Michigan, United States
Mar 3rd

This end mill sharpener is from my home work shop. I purchased it new from Production Tool Co. I started my business in my home work shop (Bridgeport and metal saw) Within 3 months I got a big purchase order from One of the big three.

Studer s20 grinder refurbished tailstock w/ wheel dresser

San Jose, California, United States
Mar 3rd

This tail stock is from a Swiss Studer S20 model Grinder. It was separated or lost from the machine. EXTREMELY HARD TO FIND AND A VERY RARE FIND WITH THIS CONDITION.

Super clean mitsui 200mh surface grinder with mitutoyo dro

Kersey, Pennsylvania, United States
Mar 3rd

This is the cleanest used grinder on the market today. The mitutoyo dro works flawless.The walker ceramax magnet holds and releases like it should.This is believed to be a mid to late 90's machine. I'm willing to offer a 10 day money back guaranty minus all shipping including return shipping and $500 if you payed with PayPal if your not completely happy with this grinder.we can load on pellet for local pickup or you can take care of all trucking setup and charges.shipping will be from

Steel starrett adjustable sliding machinist tooling jig block fixture very good

Woodbury, Connecticut, United States
Mar 3rd

HERE WE HAVE A STEEL STARRETT (I BELIEVE STARRETT) ADJUSTABLE SLIDING MACHINIST TOOLING JIG BLOCK FIXTURE IN VERY GOOD USED CONDITION. THE ATTACHED 4 INCH RULER LOCATED ON THE SIDE OF THE UNIT READS "STARRETT" BUT I DO NOT KNOW IF THAT NAME REPRESENTS THE RULER ONLY, OR THE ENTIRE PIECE. AS YOU CAN SEE IN THE PHOTOS, THE STEEL BASE MEASURES APPROX 10 AND 1/2 INCHES X 5 INCHES WIDE, AND THE UPPER SLIDING/ADJUSTABLE SECTION MEASURES APPROX 8 AND 3/4 X 2 AND 3/4 INCHES.

Dumore hand grinder cat. 10-021 1.2 a 22000 rpm grinder/sander/polisher

Hillside, New Jersey, United States
Mar 3rd

This Listing is for One(1) Dumore Hand Grinder cat. 10-021 1.2 A 22000 RPM Grinder/Sander/Polisher

Magnetic v-block us pat. machinist toolmakers tools

Reynoldsburg, Ohio, United States
Mar 3rd

Please see pictures for additional information. Check out our Eba

Norton dressing diamond single point nr2m6

Erie, Pennsylvania, United States
Mar 3rd

SINGLE POINT SPEC. NR2M6 3/8 SHANK X 3" LONG

Magna-lock 6 3/8 by .117 by 6.3 set .138 thick by 9.875 two sets non magnetic

Granger, Indiana, United States
Mar 3rd

Magna-Lock Non Magnetic Hold Downs for use on Magnetic Chuck 0.117 thick They are 6.300" Long .138 by 9.875 Very Good Condition Shipping will be Priority Small Flat Rate Box $12.75

Darex drill sharpener m-5, 1/8" to 1-1/8" drills

Avalon, California, United States
Mar 3rd

This is a Darex M-5 drill sharpening system mounted to a 115 volt 1/3 HP Black and Decker 6" grinder. With this drill sharpening system you can sharpen drills from 1/8 inch diameter to 1-1/8 inch diameter. Included are three chucks for the various size drills.

Taft pierce 10" sine bar no. 9116 machinist tool maker grinding (10.000) w/ box

Buffalo, Minnesota, United States
Mar 3rd

TAFT & PEIRCE 10" SINE BAR No 9116 OVER ALL DIMENTIONS ARE 11 1/2" x 1 3/8" x 3/8" COMPLETE WITH ORIGINAL CASE VELVET LINING AWESOME VINTAGE PIECE. USED IN EXCELLENT CONDITION. PLEASE SEE ALL PICTURES FOR DETAILS THANKS FOR LOOKING

Radius dresser j&s radius angle wheel dresser toolmaker machinist surface grind

McKees Rocks, Pennsylvania, United States
Mar 3rd

RADIUS DRESSER J&S RADIUS ANGLE Wheel Dresser TOOLMAKER MACHINIST SURFACE GRIND Item appears to be in good shape, the case may have a few signs of wear as does the instruction sheet, but overall the dresser is good. Pics describe the item best. If you have a UPS or Fedex account number I will ship for free using that.

Used burr king 760 grinder 1.5 horse belt grinder knife making

Cedarburg, Wisconsin, United States
Mar 3rd

used burr king 760 2" 1.5 hp. shows signs of use. broken and repaired door hinge.