+ Post new Ad
Toolmaker's / Machinist's Sine Bars - 3" and 5", US $780 – Picture 0
Toolmaker's / Machinist's Sine Bars - 3" and 5", US $780 – Picture 1
Toolmaker's / Machinist's Sine Bars - 3" and 5", US $780 – Picture 2
Toolmaker's / Machinist's Sine Bars - 3" and 5", US $780 – Picture 3
Toolmaker's / Machinist's Sine Bars - 3" and 5", US $780 – Picture 0
Toolmaker's / Machinist's Sine Bars - 3" and 5", US $780 – Picture 1
Toolmaker's / Machinist's Sine Bars - 3" and 5", US $780 – Picture 2
Toolmaker's / Machinist's Sine Bars - 3" and 5", US $780 – Picture 3

Toolmaker's / Machinist's Sine Bars - 3" And 5"

US $780

  • Charlestown, Indiana, United States
  • Jan 30th
Open on mobile:
QR code
WELCOME! UP FOR AUCTION IS A PAIR OF SINE BARS THAT I MADE FROM D-2 TOOL STEEL AND WIRED THEM ON A SODICK WIRE EDM. BOTH SINE BARS ARE TAPPED WITH A 10-32 ON EACH END FOR STOPS TO BE MOUNTED. MY NAME IS ENGRAVED ON THE BOTTOM OF EACH SINE BAR. THIS WAS MY PERSONAL TOOL FOR MANY YEARS WHILE IN THE TRADE. IT HAS BEEN USED BUT NOT ABUSED. PLEASE REVIEW PICTURES CAREFULLY BEFORE BIDDING.   IF YOU’RE NOT HAPPY WITH THIS ITEM YOU CAN RETURN TO ME UNDAMAGED AT YOUR COST AND I WILL ISSUE YOU A REFUND IMMEDIATELY   I WILL BE HAPPY TO ANSWER ANY QUESTIONS CONCERNING THIS ITEM THE ITEM WILL BE PACKAGED CAREFULLY FOR SHIPMENT TO YOU SHIPPING WILL BE CALCULATED FROM MY ZIP CODE TO YOURS VIA U.S.P.S. THANKS FOR STOPPING BY AND HAPPY BIDDING!!!        

Directions

Similar products from Fittings & Plates

ACCURATE BUSHING CO. Lift Swing #4220

ACCURATE BUSHING CO. Lift Swing #4220

  • Oregon, Ohio, United States
  • Jan 30th
MAGNETOOL Compound Sine Plate model 665, 6-1/8" X 6-3/8"

MAGNETOOL Compound Sine Plate model 665, 6-1/8" X 6-3/8"

  • Oregon, Ohio, United States
  • Jan 30th
Magnetic Sine Plate 6" x 6" Suburban Tool Mfg.

Magnetic Sine Plate 6" x 6" Suburban Tool Mfg.

  • Oregon, Ohio, United States
  • Jan 30th
BOKUM Tool Sharpening Fixture

BOKUM Tool Sharpening Fixture

  • Oregon, Ohio, United States
  • Jan 30th
5" Sine Plate with rail an 7 standards

5" Sine Plate with rail an 7 standards

  • Bronson, Florida, United States
  • Jan 30th
DAVENPORT P/N #5134-1 GENEVA MOTION STAR WHEEL

DAVENPORT P/N #5134-1 GENEVA MOTION STAR WHEEL

  • Churchville, New York, United States
  • Jan 30th
MACHINIST TOOLS – 5” DIVIDING HEAD / DIVIDING PLATE (48,66,70,75,80) (1-1/4)

MACHINIST TOOLS – 5” DIVIDING HEAD / DIVIDING PLATE (48,66,70,75,80) (1-1/4)

  • Camarillo, California, United States
  • Jan 30th
Vertical Milling Slide-Industrial Extra Heavy Duty-Serious Piece of Machinery

Vertical Milling Slide-Industrial Extra Heavy Duty-Serious Piece of Machinery

  • Jackson, Mississippi, United States
  • Jan 30th
(2) JERGENS 500MM T-SLOTTED BALL LOCK FIXTURE PLATES / PALLETS

(2) JERGENS 500MM T-SLOTTED BALL LOCK FIXTURE PLATES / PALLETS

  • Cleveland, Ohio, United States
  • Jan 30th
ADJUSTABLE HEIGHT CAST IRON TAIL STOCK MODEL DU 105 4-1/2" TO 7-5/8" TILTED

ADJUSTABLE HEIGHT CAST IRON TAIL STOCK MODEL DU 105 4-1/2" TO 7-5/8" TILTED

  • Jamestown, New York, United States
  • Jan 30th
MEPACO 73000409 HEART SHAPE UNPLATED CAM PLATE FOR MODEL 420V M120173-3 B268393

MEPACO 73000409 HEART SHAPE UNPLATED CAM PLATE FOR MODEL 420V M120173-3 B268393

  • Buffalo, New York, United States
  • Jan 30th
SUBURBAN TOOL Model SV-337 VISE 7 1/2" Long x 4 1/8" Overall x High 3" Wide

SUBURBAN TOOL Model SV-337 VISE 7 1/2" Long x 4 1/8" Overall x High 3" Wide

  • Etna Green, Indiana, United States
  • Jan 30th
1/8" x 1/2 - 1 5/8 Super Prec. Parallel Set,USA - 10 Pair

1/8" x 1/2 - 1 5/8 Super Prec. Parallel Set,USA - 10 Pair

  • Walkerton, Indiana, United States
  • Jan 30th
YUASA 550-103 TAILSTOCK FOR 5C FIXTURE MACHINIST TOOLING

YUASA 550-103 TAILSTOCK FOR 5C FIXTURE MACHINIST TOOLING

  • Waterford, Michigan, United States
  • Jan 30th
Northwestern 33119 3/4-10 x 1-3/4" Heavy Spring Plunger Steel Nose USA

Northwestern 33119 3/4-10 x 1-3/4" Heavy Spring Plunger Steel Nose USA

  • Crystal Lake, Illinois, United States
  • Jan 30th
MACHINIST TOOLS LATHE MILL Nice Ground Step Angle Block Fixture for Set Up

MACHINIST TOOLS LATHE MILL Nice Ground Step Angle Block Fixture for Set Up

  • Troy, Ohio, United States
  • Jan 30th
Aluminum Angle 1 x 1 x 48 in, 1/4 in thick, 6061, Structural, NEW!

Aluminum Angle 1 x 1 x 48 in, 1/4 in thick, 6061, Structural, NEW!

  • Old Fort, North Carolina, United States
  • Jan 30th
CLEAN! 3" X 12" PRECISION SINE PLATE

CLEAN! 3" X 12" PRECISION SINE PLATE

  • Chino, California, United States
  • Jan 30th
15" SLOTTED MOUNTING FACE PLATE FOR LATHE W/ L0 MOUNT

15" SLOTTED MOUNTING FACE PLATE FOR LATHE W/ L0 MOUNT

  • Chino, California, United States
  • Jan 30th
Right Angle Plate CHALLENGE 6 X 6 X 6 RIGHT ANGLE PLATE L101

Right Angle Plate CHALLENGE 6 X 6 X 6 RIGHT ANGLE PLATE L101

  • Denver, Colorado, United States
  • Jan 30th

People who viewed this item also vieved

NICE LOT OF 2 MT2 DEAD CENTERS FOR ATLAS CRAFTSMAN SOUTH BEND LATHE

NICE LOT OF 2 MT2 DEAD CENTERS FOR ATLAS CRAFTSMAN SOUTH BEND LATHE

  • Northeast, United States
  • Jun 2nd
Revolving Centre MT3

Revolving Centre MT3

  • DELHI, DELHI, India
  • Jun 2nd
Revolving Centre MT1

Revolving Centre MT1

  • DELHI, DELHI, India
  • Jun 2nd
CLEAN DA 100 10 PC COLLET SET, SIZES RANGE BETWEEN 1/16 - 9/16 DIA. DA100 C13986

CLEAN DA 100 10 PC COLLET SET, SIZES RANGE BETWEEN 1/16 - 9/16 DIA. DA100 C13986

  • Dayton, Ohio, United States
  • Jun 2nd
CLEAN DA 100 16 PC COLLET SET, SIZES RANGE BETWEEN 1/16 - 9/16 DIA. DA100 C13984

CLEAN DA 100 16 PC COLLET SET, SIZES RANGE BETWEEN 1/16 - 9/16 DIA. DA100 C13984

  • Dayton, Ohio, United States
  • Jun 2nd
CLEAN DA180 4 PC SET 1/4, 5/16, 3/8 AND 1/2" DIA. DA180 GREAT COND. LOT C13977

CLEAN DA180 4 PC SET 1/4, 5/16, 3/8 AND 1/2" DIA. DA180 GREAT COND. LOT C13977

  • Dayton, Ohio, United States
  • Jun 2nd
NEW 110058 Hytec Swing Clamp 750LB S/A S Low Flange comes with No. 9614 manifold

NEW 110058 Hytec Swing Clamp 750LB S/A S Low Flange comes with No. 9614 manifold

  • Story City, Iowa, United States
  • Jun 3rd
Hytec Swing Clamp 750LB S/A S Low Flange 110058 NEW

Hytec Swing Clamp 750LB S/A S Low Flange 110058 NEW

  • Story City, Iowa, United States
  • Jun 3rd
VEKTEK 14-6113-01-L SWING CLAMP TUFFCAM TF

VEKTEK 14-6113-01-L SWING CLAMP TUFFCAM TF

  • Story City, Iowa, United States
  • Jun 3rd
CUSHMAN 3-Jaw Universal Lathe Chuck 5 inch

CUSHMAN 3-Jaw Universal Lathe Chuck 5 inch

  • Helena, Montana, United States
  • Jun 4th
HHIP 3900-4868 7/16" Square Head Standard Lathe Chuck Wrench

HHIP 3900-4868 7/16" Square Head Standard Lathe Chuck Wrench

  • US, United States
  • Jun 4th
6 1/4" Rohm 3-Jaw Lathe Chuck

6 1/4" Rohm 3-Jaw Lathe Chuck

  • Whitehouse, Ohio, United States
  • Jun 4th
Vintage Erie Tool Works No.00-H Pipe Clamp Vise Bench YOKE VISE USA Ridgid

Vintage Erie Tool Works No.00-H Pipe Clamp Vise Bench YOKE VISE USA Ridgid

  • Pennsburg, Pennsylvania, United States
  • Jun 4th
MACHINIST MILLING DRILL PRESS ANGLE VISE 2-1/2"

MACHINIST MILLING DRILL PRESS ANGLE VISE 2-1/2"

  • Coram, New York, United States
  • Jun 5th
Vintage 4" Jaws Wilton No. 400-4 Bullet Vise 8400 9400 -Produced 1948 Heavy Duty

Vintage 4" Jaws Wilton No. 400-4 Bullet Vise 8400 9400 -Produced 1948 Heavy Duty

  • Lynwood, California, United States
  • Jun 5th
Starrett V Drill Block Set with Clamp No 271C

Starrett V Drill Block Set with Clamp No 271C

  • Troy, New York, United States
  • Jun 14th
V-Block Set; Precision; Fowler; 5"x3"x3" (CTAM 9661)

V-Block Set; Precision; Fowler; 5"x3"x3" (CTAM 9661)

  • Sicklerville, New Jersey, United States
  • Jun 14th
Vintage Empire Tool Company Lathe Cut Off Blade Holder Logan Southbend Craftsman

Vintage Empire Tool Company Lathe Cut Off Blade Holder Logan Southbend Craftsman

  • Conway, New Hampshire, United States
  • Jun 14th
Hanging Spiral Star Kit Makes 2-Holiday Lodge

Hanging Spiral Star Kit Makes 2-Holiday Lodge

  • Hickory Hills, Illinois, United States
  • Jun 19th
"Penny Black Clear Stamps 5""X7""-Purrfect Day"

"Penny Black Clear Stamps 5""X7""-Purrfect Day"

  • Hickory Hills, Illinois, United States
  • Jun 19th
"Stamped Embroidery Quilt Blocks 18""X18"" 6/Pkg-Butterfly"

"Stamped Embroidery Quilt Blocks 18""X18"" 6/Pkg-Butterfly"

  • Hickory Hills, Illinois, United States
  • Jun 19th
Haas Rotary Table. Model HRT-160. Brush Style, Single Plug

Haas Rotary Table. Model HRT-160. Brush Style, Single Plug

  • Lowell, Massachusetts, United States
  • Oct 19th
NEW Haas CNC MILL 4th and 5th axis TR160 Trunion 2015

NEW Haas CNC MILL 4th and 5th axis TR160 Trunion 2015

  • Payson, Utah, United States
  • Oct 19th
Cross Slide Table with rocker tool post - double compound - for lathe/milling

Cross Slide Table with rocker tool post - double compound - for lathe/milling

  • Curtiss, Wisconsin, United States
  • Oct 19th
++ GILMAN 8" X 8" SLIDE W/ BALLSCREW ACTUATOR - NOS

++ GILMAN 8" X 8" SLIDE W/ BALLSCREW ACTUATOR - NOS

  • Bosque Farms, New Mexico, United States
  • Oct 23rd
LOT of TWO Starrett S191 Machinist Jack Screw NEW in Boxes

LOT of TWO Starrett S191 Machinist Jack Screw NEW in Boxes

  • Walland, Tennessee, United States
  • Oct 23rd
Starrett S190 little giant Jack Screw

Starrett S190 little giant Jack Screw

  • Brookhaven, Pennsylvania, United States
  • Oct 23rd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies