bars of steel for sale, brand-new and used.

(2) PARALLEL BARS SET, RAILS, WORKHOLDING STEEL MACHINIST BLOCKS / MACHINIST TOOLS / WEIGHTS Used and in very good condition; some minor surface rust and scratches. Very versatile pair of Workholding Parallel Machinist Bar Assemblies, Steel Machinist Tools. Each bar assembly weighs about 10 lbs.

Note regarding fit: Measure your inside, front to back, bed gap. These 4 bars are intended for stand alone use on 20 ton presses with, front to back, gap of about 4.25". Your No.

This 4 pc set is now being offered with our PREMIUM X-BARS. Note regarding fit: Measure your inside, front to back, bed gap. These 4 bars are intended for stand alone use on 20 ton (or less) presses with, front to back, gap of about 4.25 inches.

NOW with FREE telescoping LED lighted inspection mirror. This large, 3-3/8" diameter, 3 LED lighted inspection mirror is perfect for boiler, welding, under dash... inspection as well as shop press work.

var itemNumber = window.ebayItemID ?

Our X-BARS, BIG BARS and Press Plates are proudly used around the country by: Farm, Aviation, Auto and Heavy Duty shops, plus Racers, Marinas, Machine Tool, Industrial and Hobbyists of all descriptions. Sold in Matched Pairs

Note regarding fit: Measure your inside, front to back, bed gap. These 4 bars are intended for stand alone use on 20 ton presses with, front to back, gap of about 4.25". These are the most economical press bars on the internet...shipped FREE right to your door!

4 piece set consisting of a pair of hefty “universal” press bars for 30 to 40 ton presses PLUS a pair of PREMIUM X-BARS to cut unit loading of workpiece by at least half. Our X-BARS, BIG BARS and Press Plates are proudly used around the country by: Farm, Aviation, Auto and Heavy Duty shops, plus Racers, Marinas, Machine Tool, Industrial and Hobbyists of all descriptions. Where ordinary 20 ton plates are to short or to weak, these

These 3 Ton Press Bars used flat (4 Ton used on edge), measuring 1/2" X 3/4" X 4.25, were designed for use on a 3 ton arbor press where they support 6000 lbs. over the anvil wheel slot span of 2” or less. These FULLY GROUND matched bars are handy for other uses such as set-up blocks and shims.

Used - Like new. Binder and copyright pages have owners name written on them. 3-ring binder for removal and insertion of pages.

Untitled Document

Untitled Document

Untitled Document

var itemNumber = window.ebayItemID ?

Ted's Trucks 1181 County Rd 560 Midland City AL 36350 334-983-1092 Bobrick B-6806x18 Concealed Mounting W/ Snap Flange Grab Bars 18-8 S, type-304, 18-gauge (1.2mm) stainless steel tubing Satin-finish. 1-1/2" (38mm) outside diameter. Ends are heliarc welded to flanges.

premium hitch receiver for ford 12 weld on hitch ball mount for ford dodge chevy new 25 ton shop arbor hydraulic press plates *********************

We accept Pal Pay at our on line store, wear you can purchase all our products . Thanks

New Digital Portion Control Scale up to 10 lbs weighing for portioning: The LEQ Series Portion Control scale provides an economical alternative to address your portion weighing needs in a wide range of manufacturing and food service applications. Ideal for restaurants, bars, pizzerias, bakeries, industrial kitchens, hospitals and more! Now LEGAL FOR TRADE (NTEP)!