Tools for Lathe Machines (Tools for Specific Machines) for sale, page 198

Unimat sl1000 / db200 lathe headstock vertical column & adaptor (cast iron)

Hillsborough, New Jersey, United States
Jan 30th

UNIMAT SL1000 / DB200 LATHE HEADSTOCK VERTICAL COLUMN & ADAPTOR (CAST IRON) a.image

Rare south bend 10" 10k lathe complete original turret tailstock assembly

Washington, Illinois, United States
Jan 30th

Up for sale is this complete South Bend 10K lathe turret tailstock. This is an accessory that many have never even seen! This is in nice original condition, functions, and is ready to bolt on and use.

Swartchild 5mm collet set watchmaker lathe derbyshire boley pultra levin lorch

Hillsborough, New Jersey, United States
Jan 30th

SWARTCHILD 5mm COLLET SET WATCHMAKER LATHE DERBYSHIRE BOLEY PULTRA LEVIN LORCH a.imagelink {color:#03a4e8;} a:h

Unimat sl1000 / db200 lathe wooden box

Hillsborough, New Jersey, United States
Jan 30th

UNIMAT SL1000 / DB200 LATHE WOODEN BOX a.imagelink {color:#03a4e8;} a:hover.imagelink {color:#03a4e8;} a:visite

Unimat sl1000 / db200 lathe bed with carriage (cast iron)

Hillsborough, New Jersey, United States
Jan 30th

UNIMAT SL1000 / DB200 LATHE BED WITH CARRIAGE (CAST IRON) a.imagelink {color:#03a4e8;} a:hover.imagelink {color

J h williams l/r boring bar holder no. 16

Frederick, Maryland, United States
Jan 30th

Very nice J H Williams boring bar holder. Flips over for either right orleft hand use. Shaft is 1/2 X 1 inch and about 4 1/2 inches long.

Unimat sl1000 / db200 lathe power feed attachment

Hillsborough, New Jersey, United States
Jan 30th

UNIMAT SL1000 / DB200 LATHE POWER FEED ATTACHMENT a.imagelink {color:#03a4e8;} a:ho

Unimat sl1000 / db200 lathe headstock (cast iron)

Hillsborough, New Jersey, United States
Jan 30th

UNIMAT SL1000 / DB200 LATHE HEADSTOCK (CAST IRON) a.imagelink {color:#03a4e8;} a:hover.imagelink {color:#03a4e8

Unimat sl1000 / db200 lathe motor (cast iron version)

Hillsborough, New Jersey, United States
Jan 30th

UNIMAT SL1000 / DB200 LATHE MOTOR (CAST IRON VERSION) a.imagelink {color:#03a4e8;} a:hover.imagelink {color:#03

Unimat sl1000 / db200 lathe threading master & follower 40 tpi in box

Hillsborough, New Jersey, United States
Jan 30th

UNIMAT SL1000 / DB200 LATHE THREADING MASTER & FOLLOWER 40 TPI IN BOX a.imagelink {color:#03a4e8;} a:hover.imag

Unimat sl1000 / db200 lathe threading master & follower 32 tpi in box

Hillsborough, New Jersey, United States
Jan 30th

UNIMAT SL1000 / DB200 LATHE THREADING MASTER & FOLLOWER 32 TPI IN BOX a.imagelink {

Unimat sl1000 / db200 lathe threading master & follower 24 tpi in box

Hillsborough, New Jersey, United States
Jan 30th

UNIMAT SL1000 / DB200 LATHE THREADING MASTER & FOLLOWER 24 TPI IN BOX a.imagelink {color:#03a4e8;} a:hover.imag

9" logan lathe tool post

Keller, Texas, United States
Jan 30th

Original toolpost from a 9B-28-1 Logan metal lathe.This lathe showed almost no wear, and the toolpost reflects that.There are a few places that show evidence of rust pitting from prior neglect, but it does not affect usage.There is no rust on it currently, it is clean and everything fits together as it should. This is a nice toolpost! May fit other Logan and possible the 9" South Bends, or Atlas.

Unimat sl1000 / db200 lathe collet chuck 1x12 & collets 1/64 - 1/8 - 1/4 - 3/16

Hillsborough, New Jersey, United States
Jan 30th

UNIMAT SL1000 / DB200 LATHE COLLET CHUCK 1x12 & COLLETS 1/64 - 1/8 - 1/4 - 3/16 a.imagelink {color:#03a4e8;} a:

Unimat sl1000 / db200 lathe round table in box & clamps

Hillsborough, New Jersey, United States
Jan 30th

UNIMAT SL1000 / DB200 LATHE ROUND TABLE IN BOX & CLAMPS a.imagelink {color:#03a4e8;} a:hover.imagelink {color:#

Unimat sl1000 / db200 lathe dividing indexing head in box

Hillsborough, New Jersey, United States
Jan 30th

UNIMAT SL1000 / DB200 LATHE DIVIDING INDEXING HEAD IN BOX a.imagelink {color:#03a4e8;} a:hover.imagelink {color

Unimat sl1000 / db200 lathe headstock raising block (cast iron)

Hillsborough, New Jersey, United States
Jan 30th

UNIMAT SL1000 / DB200 LATHE HEADSTOCK RAISING BLOCK (CAST IRON) a.imagelink {color:

19 1/2" x 1/2" link belt could b4 atlas craftsman south bend lathe

Belle Mead, New Jersey, United States
Jan 30th

METAL LATHE LINK BELT LENGTH IS 19 1/2" WIDTH IS 1/2" THIS CAN BE ADJUSTED TO BE SHORTER IF YOU NEED SHOW VERY MINOR WEAR IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK, IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM !!!

10" 12 atlas craftsman lathe thread dial

Belle Mead, New Jersey, United States
Jan 30th

10" 12 ATLAS CRAFTSMAN LATHE THREAD DIAL IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK, IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM !!!

Original 8" dog drive "t" slot lathe face plate atlas craftsman south bend

Belle Mead, New Jersey, United States
Jan 30th

8" DOG DRIVE "T" SLOT LATHE FACE PLATE STAMPED # 3 AND 3207 1 5/8" X 12 TPI 3/4" WIDE IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK, IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM !!!